Toastmaster EDBL12 User manual
USE AND CARE GUIDE -- MODEL EDBL12
EDBL12
• 400-watts powerful motor
• 12 speeds and pulse
• Ice crusher function
• Durable 48 oz. glass jar
• Stainless steel blades
Blender
Questions
Call toll free 1-800-947-3744
Monday–Friday, 8:00 a.m.-5:30 p.m. CST
www.toastmaster.com
?
1.
READ AND SAVE
THESE INSTRUCTIONS
WARNING: A risk of fire and electrical shock exists in all electrical
appliances and may cause personal injury or death. Please follow all
safety instructions.
IMPORTANT SAFEGUARDS
When using electrical appliances, basic safety precautions should
always be followed including the following:
◆Read all instructions before using blender.
◆Do not put blender base, cord or plug in water or other liquid. See
instructions for cleaning.
◆This blender is not for use by children.
◆Close supervision is necessary when the blender is used near
children.
◆Unplug from outlet when not in use, before putting on or taking
off parts, and before cleaning.
◆Do not contact moving parts.
◆Do not operate any damaged appliance.
◆Do not operate any blender with a damaged cord or plug or after
the blender malfunctions, or has been dropped or damaged in any
manner. Contact Consumer Service for return authorization, for
examination, repair or adjustment for examination, repair, or
mechanical adjustment.
◆Do not use canning jars or any attachment not recommended by
the manufacturer as this may cause risk of injury to persons.
◆Keep hands and utensils out of container while blending to reduce
the risk of severe injury to persons or damage to the blender. If
scraping, folding, etc. is necessary, turn off and unplug blender
and use rubber spatula only.
◆Blades are sharp. Handle carefully.
◆To reduce the risk of injury, never place cutting blades on base
without blender container properly attached.
◆Screw on container bottom firmly. Injury can result if moving
blades accidentally become exposed.
◆Always operate blender with cover in place.
◆Do not use outdoors or when standing in a damp area.
2. Blender Use and Care Guide
◆Do not let cord hang over edge of table or counter, or touch hot
surfaces, including the stove.
◆Do not leave blender unattended while it is operating.
◆Do not use blender for other than intended use.
◆When blending hot liquids, remove lid insert from the two-piece cover.
SAVE THESE INSTRUCTIONS
CAUTION: A short power supply cord is provided to reduce the risk
of personal injury resulting from becoming entangled in or tripping
over a longer cord. Extension cords are available from local hardware
stores and may be used if care is exercised in their use. If an
extension cord is required, special care and caution is necessary. Also
the cord must be (1) marked with an electrical rating of at least 10 A.,
125 V., 1250 W.,and (2) the cord should be arranged so that it will not
drape over the countertop or tabletop where it can be pulled on by
children or tripped over accidentally.
ELECTRIC POWER: If the electric circuit is overloaded with other
appliances, your appliance may not operate properly. It should be
operated on a separate electrical circuit from other appliances.
POLARIZED PLUG: This appliance has a polarized plug, (one blade
is wider than the other). As a safety feature to reduce the risk of
electrical shock, this plug is intended to fit in a polarized outlet only
one way. If the plug does not fit fully in the outlet, reverse the plug. If
it still does not fit, contact a qualified electrician. Do not attempt to
defeat this safety feature.
This product is for household use only.
3.
Lid Insert (P/N 70659) Lid
Assembly
Lid (P/N 70660)
Glass Container
(P/N 70661)
Gasket (P/N 70662)
Blades (P/N 70663) Cutting
Blade
Assembly
Collar (P/N 70664)
Motor Base
FIGURE 1
FIGURE 2
Lid
Insert
Lid
FIGURE 3
4. Blender Use and Care Guide
FIGURE 4
FIGURE 5
Using Your Blender
1. Before using your appliance for the first time and after each use,
wash lid, lid insert, container, gasket, blades and locking ring in
warm sudsy water. Rinse and dry thoroughly. See CARE AND
CLEANING.
CAUTION: BLADES ARE SHARP. HANDLE CAREFULLY.
CAUTION: NEVER PLACE BLENDER MOTOR BASE OF
APPLIANCE IN WATER OR OTHER LIQUIDS.
2. Place blender motor base on a dry level surface.
3. Make sure the ON/OFF Switch located at the back of the blender
base is turned to the OFF position (O); see Figure 4.
4. Invert container onto level countertop and assemble cutting
assembly onto bottom of the container, making sure they are
securely tightened into place, see Figure 1.
5. Insert container aligning the notches and grooves until it fits
securely into the blender motor base, see Figure 5.
6. Place food into container and cover with lid assembly. Always hold
onto container while blending.
5.
CAUTION: DO NOT ATTEMPT THE OPERATE WITHOUT
COLLAR, BLADES, GASKET, CONTAINER, LID AND LID INSERT
PROPERLY IN PLACE.
7. Plug into 120 V ~ 60 Hz AC outlet.
8. To start the blender, press the ON/OFF switch located at the back of
the blender base to the ON position (I), see Figure 4. Note: Whenever
the blender is switched on, the LOW button indicator light will be on.
9. Refer to Figure 6. LOW SPEED MODE (SPEEDS 1-6): Press the
LOW button and the LOW indicator light will come on. Press and
release the desired speed (STIR, AERATE, CHOP, SHRED, GRATE
or BLEND). The selected speed light will come on. You may select
another low speed by pressing a different speed button. The
blender will continue to operate until you press the OFF button.
The OFF is also the PULSE (LOW SPEED MODE) and the ICE
CRUSHER (HIGH SPEED MODE) button.
HIGH SPEED MODE (SPEEDS 7-12): Press the HIGH button and
the HIGH indicator light will illuminate. Press and release the
desired speed (MIX, WHIP, BEAT, PUREE or LIQUEFY). The
selected speed light will come on. You may select another high
speed by pressing a different speed button. The blender will
continue to operate until you press the OFF button. Note: To
change from a high speed to a low speed or from a low speed to a high
speed, press the STOP button, then choose the LOW or HIGH speed and
follow directions in step #9.
PULSE: Press the HIGH button and the HIGH indicator light will
come on. Quickly press and release or press and hold the PULSE
button for the desired length of time. To stop the blender, release
the PULSE/STOP button. NOTE: DO NOT use the PULSE
feature on LOW speed. Always use the PULSE feature on HIGH
SPEED.
FIGURE 6
6. Blender Use and Care Guide
10. Press the STOP button to stop blender action.
11. Press the ON/OFF switch to the OFF position (O).
12. Unplug the appliance before removing the container.
13. Grasp container handle and lift container off of the blender
motor base. Remove lid assembly. Pour processed food out of
the container. Unscrew collar from container and carefully
remove cutting assembly.
CAUTION: BLADES ARE SHARP. HANDLE CAREFULLY.
Hot Ingredients
Note: When processing hot fods, always remove the lid insert from the lid
before beginning.
To prevent excessive heat expansion, remove lid insert from lid
berore adding hot ingredients.
Crushing Ice
1. Follow steps 2-4 in USING YOUR BLENDER.
2. Fill container with 2 cups of ice cubes.
3. Place lid assembly on container.
4. Press the HIGH SPEED button.
5. Press the ICE CRUSH button. Ice can be crushed by continuous
operation or by pulsing the ICE CRUSH button until desired
consistency is reached.
6. Press STOP button and turn ON/OFF switch to OFF position
(O). Unplug appliance.
7. Remove container from blender base.
7.
Do
◆Always place liquid ingredients into the container first, unless
recipe directs otherwise.
◆Most foods require only seconds, not minutes, to process.
◆Blend small amounts of solid food at a time for best results.
◆Break or cut food into uniform 1”-2” size pieces and hard fibrous
food into uniform 1/2” pieces before processing. This will allow
the food to drop down around the blades for faster, more
thorough blending action.
◆Always place lid assembly on container before turning blender on
to prevent splattering.
◆To add foods while blender is operating, remove small clear lid
insert on lid and slowly add ingredients.
◆The removable lid insert may be used as a 2 oz. measuring device.
◆Always remove bones, pits, hard shells, seeds, and cores before
processing to avoid damaging the unit.
◆If food sticks to sides of container and blending action stops, turn
the unit off, remove the lid assembly and carefully push food down
using a rubber spatula. Remove spatula, replace lid assembly and
continue blending.
◆If motor labors while processing, turn knob to higher speed or
remove part of contents and blend in small batches.
Do Not
CAUTION: DO NOT ATTEMPT TO OPERATE WITHOUT THE
LOCKING RING, BLADE, GASKET, CONTAINER, LID AND LID
INSERT IN PLACE.
◆Do not attempt to process extremely hard food which is difficult to
cut with a kitchen knife.
◆Do not fill the container with food above the 5 cup level.
◆Do not store foods in the blender container.
◆Do not process ice without liquids.
◆Do not attempt to use the blender to mash potatoes, whip egg
whites or cream, grind raw meat, knead heavy doughs, or extract
juices from fruits and vegetables.
◆Do not use the blender to process hot foods.
◆Do not remove blender container from base or replace it until
motor has stopped.
◆Do not remove lid assembly while processing. Use removable lid
insert on lid to add ingredients.
8. Blender Use and Care Guide
Care And Cleaning
1. Press the ON/OFF switch to the OFF position (O) and unplug
the appliance.
2. Grasp container handle and lift container from the blender
motor base. Rinse with water to remove any large food particles
that may have accumulated in the container.
3. Insert container aligning the notches and grooves until it fits
securely into the blender motor base. Turn clockwise to lock.
4. Add 11⁄2 cups warm, soapy water to the container and cover with
the lid assembly.
5. Press the ON/OFF switch to the ON position (I).
6. Press the HIGH button and then press the LIQUEFY button for a
few seconds.
7. Press the STOP button to stop the cleaning process. Turn the
ON/OFF switch to the OFF position (O) and unplug the
appliance.
8. Grasp container handle and lift container off of the blender
motor base. Remove lid and assembly and rinse container with
water. Repeat steps 1-7 as necessary.
9. Unscrew collar from container and remove cutting assembly.
CAUTION: BLADES ARE SHARP. HANDLE CAREFULLY.
CAUTION: NEVER PLACE BLENDER MOTOR BASE OR
APPLIANCE IN WATER OR OTHER LIQUIDS.
10. Immediately after each use, disassemble lid and cutting assembly.
Carefully wash all parts in warm soapy water. Rinse and dry
thoroughly. Do not wash parts in dishwasher.
11. Do not use a harsh abrasive on any part of the blender.
12. Clean the exterior of blender motor base with a soft damp cloth
and dry.
13. Reassemble cutting assembly onto container. Place onto blender
motor base with lid assembly. Spin dry on LIQUEFY for
10 seconds. Remove lid assembly and store blender jar inverted
on base (see Figure 7).
9.
FIGURE 7
Any servicing requiring disassembly other than the above cleaning must
be performed by an authorized service center. Failure to follow this
instruction may result in a fire, electric shock or injury to persons.
Blending Guide
Your blender features a variable speed control. While you may select
any speed, the following list will help you determine where to set the
control for various items.
SPEEDS FOODS MIXING PROCEDURES
STIR Pancake Batter Add liquid, eggs, then enough mix
for 15 small pancakes. Stir 5
seconds. Stop and scrape sides. Stir
5 seconds more until large lumps
disappear.
STIR Sauces Add liquids then solids to
container. Stir until desired
consistency.
AERATE Frozen Juice Add one 6 oz. can frozen juice,
then water. Aerate 15 seconds or
until blended.
CHOP Chocolate Bars Break 2 ounces into 1” pieces and
chop 30-60 seconds or until desired
consistency.
Table of contents
Other Toastmaster Blender manuals
Toastmaster
Toastmaster TMBL2 User manual
Toastmaster
Toastmaster TM-550BL User manual
Toastmaster
Toastmaster 1135 User manual
Toastmaster
Toastmaster TB8 User manual
Toastmaster
Toastmaster TMBL1134 RA User manual
Toastmaster
Toastmaster 1132 User manual
Toastmaster
Toastmaster TMBLRET User manual
Toastmaster
Toastmaster TM-700BLC User manual
Toastmaster
Toastmaster TMR22RCAN User manual
