TJERNLUND 1 User manual

HSUL-J, HS115-J & HST-J POWER VENTER SPECIFICATIONS

Performance curves

Static pressure (inches H2O) vs CFM (std. air) at selected flue gas temps.

NOTE: TO ARRIVE AT TOTAL SYSTEM STATIC PRESSURE REFER TO CURVE

AND ADD .38” TO COMPENSATE FOR VENT HOOD AND WIND RESISTANCE.

MOTOR SPECIFICATIONS

ELECTRICAL DATA

Volts 115

Hertz 60

RPM 3000

Watts 95

Amps 1.26

Therm. Prot. Yes

MECHANICAL DATA

DESCRIPTION

Shaded Pole Yes

Open Yes

Int. Fan Cooled Yes

CASING

Diameter (In) 3.33

Nom. Length (In) 4.50

SHAFT

Diameter (In) .313

Nom. Length (In) 2.25

BEARINGS

Type Sleeve

Material Sintered Iron

COMPONENT DESCRIPTION

Relay (Model HSUL-J only)

24/115V Switching Relay

Timer Relay (Model HST-J only)

Dual Voltage 24/115V input, 1-10 minute post

purge adjustment

Fan Proving Switch (All Models)

3 FLA, 18LRA @ 120V

MODELS AND APPLICATION:

HSUL-J (Gas)

Used as a means of Side Wall Venting 24 volt

controlled appliances. This Power Venter

includes a 24/115 volt switching Relay and a

Fan Proving Switch.

HS115-J (Gas)

Used as a means of Side Wall venting 115 volt

appliances. This Power Venter DOES NOT

include a Switching Relay but still includes the

Fan Proving Switch.

HST-J (Oil or Gas)

Used as a means of Side Wall Venting 24 volt

or 115 volt controlled appliances which require

a Post Purge cycle. This Power Venter

includes a Post Purge Timer Relay and a Fan

Proving Switch.

Note: Tjernlund Products, Inc. reserves the

right to make changes to specifications without

notification.

-SIDE VIEW- -END VIEW- -PLAN VIEW-

P/N 8506001

REV. 1 11/94

TJERNLUND PRODUCTS, INC.

1601 Ninth Street • White Bear Lake, MN 55110-6794

PHONE (800) 255-4208 • (651) 426-2993 • FAX (651) 426-9547

Visit our web site • www.tjernlund.com

HSUL-1, HS115-1 & HST-1 POWER VENTER SPECIFICATIONS

Performance curves

Static pressure (inches H2O) vs CFM (std. air) at selected flue gas temps.

NOTE: TO ARRIVE AT TOTAL SYSTEM STATIC PRESSURE REFER TO CURVE

AND ADD .38” TO COMPENSATE FOR VENT HOOD AND WIND RESISTANCE.

MOTOR SPECIFICATIONS

ELECTRICAL DATA

Volts 115

Hertz 60

RPM 3000

Watts 166

Amps 1.51

Therm. Prot. Yes

MECHANICAL DATA

DESCRIPTION

Shaded Pole Yes

Open Yes

Int. Fan Cooled Yes

CASING

Diameter (In) 3.33

Nom. Length (In) 4.50

SHAFT

Diameter (In) .313

Nom. Length (In) 2.25

BEARINGS

Type Sleeve

Material Sintered Iron

COMPONENT DESCRIPTION

Relay (Model HSUL-1 only)

24/115V Switching Relay

Timer Relay (Model HST-1 only)

Dual Voltage 24/115V input, 1-10 minute post

purge adjustment

Fan Proving Switch (All Models)

3 FLA, 18LRA @ 120V

MODELS AND APPLICATION:

HSUL-1 (Gas)

Used as a means of Side Wall Venting 24 volt

controlled appliances. This Power Venter

includes a 24/115 volt switching Relay and a

Fan Proving Switch.

HS115-1 (Gas)

Used as a means of Side Wall venting 115 volt

appliances. This Power Venter DOES NOT

include a Switching Relay but still includes the

Fan Proving Switch.

HST-1 (Oil or Gas)

Used as a means of Side Wall Venting 24 volt

or 115 volt controlled appliances which require

a Post Purge cycle. This Power Venter

includes a Post Purge Timer Relay and a Fan

Proving Switch.

Note: Tjernlund Products, Inc. reserves the

right to make changes to specifications without

notification.

-SIDE VIEW- -END VIEW- -PLAN VIEW-

TJERNLUND PRODUCTS, INC.

1601 Ninth Street • White Bear Lake, MN 55110-6794

PHONE (800) 255-4208 • (651) 426-2993 • FAX (651) 426-9547

Visit our web site • www.tjernlund.com

HSUL-2, HS115-2 & HST-2 POWER VENTER SPECIFICATIONS

Performance curves

Static pressure (inches H2O) vs CFM (std. air) at selected flue gas temps.

NOTE: TO ARRIVE AT TOTAL SYSTEM STATIC PRESSURE REFER TO CURVE

AND ADD .38” TO COMPENSATE FOR VENT HOOD AND WIND RESISTANCE.

MOTOR SPECIFICATIONS

ELECTRICAL DATA

Volts 115

Hertz 60

RPM 3300

Watts 166

Amps 1.51

Therm. Prot. Yes

MECHANICAL DATA

DESCRIPTION

Perm. Split Cap Yes

Open Yes

Int. Fan Cooled No

CASING

Diameter (In) 3.33

Nom. Length (In) 4.50

SHAFT

Diameter (In) .313

Nom. Length (In) 2.25

BEARINGS

Type Sleeve

Material Sintered Iron

COMPONENT DESCRIPTION

Relay (Model HSUL-1 only)

24/115V Switching Relay

Timer Relay (Model HST-1 only)

Dual Voltage 24/115V input, 1-10 minute post

purge adjustable

Fan Proving Switch (All Models)

3 FLA, 18LRA @ 120V

MODELS AND APPLICATION:

HSUL-2 (Gas)

Used as a means of Side Wall Venting 24 volt

controlled appliances. This Power Venter

includes a 24/115 volt switching Relay and a

Fan Proving Switch.

HS115-2 (Gas)

Used as a means of Side Wall venting 115 volt

appliances. This Power Venter DOES NOT

include a Switching Relay but still includes the

Fan Proving Switch.

HST-2 (Oil or Gas)

Used as a means of Side Wall Venting 24 volt

or 115 volt controlled appliances which require

a Post Purge cycle. This Power Venter

includes a Post Purge Timer Relay and a Fan

Proving Switch.

Note: Tjernlund Products, Inc. reserves the

right to make changes to specifications without

notification.

-SIDE VIEW-

-END VIEW- -PLAN VIEW-

TJERNLUND PRODUCTS, INC.

1601 Ninth Street • White Bear Lake, MN 55110-6794

PHONE (800) 255-4208 • (651) 426-2993 • FAX (651) 426-9547

Visit our web site • www.tjernlund.com

Other manuals for 1

This manual suits for next models

Table of contents

Other TJERNLUND Fan manuals

TJERNLUND

TJERNLUND SS1 SIDESHOT WITH UC1 UNIVERSAL CONTROL (VERSION X.06) 8504102 REV D... User manual

TJERNLUND

TJERNLUND 950-8302 T-STAT KIT 8504132 User manual

TJERNLUND

TJERNLUND SIDESHOT SS2 User manual

TJERNLUND

TJERNLUND AIRESHARE AS1 User manual

TJERNLUND

TJERNLUND SS1 SIDESHOT WITH UC1 UNIVERSAL CONTROL (VERSION X.02) 8504102 REV... User manual

TJERNLUND

TJERNLUND SS1 SIDESHOT WITH UC1 UNIVERSAL CONTROL (VERSION X.04) 8504102 REV C... User manual

TJERNLUND

TJERNLUND SS2G SIDESHOT (DISCONTINUED) 8504075 REV 1... User manual

TJERNLUND

TJERNLUND SS1R SIDESHOT WITH UC1 UNIVERSAL CONTROL (VERSION X.04) 8504117 REV... User manual

TJERNLUND

TJERNLUND DRAFT INDUCER DJ-3 User manual

TJERNLUND

TJERNLUND Duct Booster RB10 User manual

TJERNLUND

TJERNLUND SS2 SIDESHOT WITH UC1 UNIVERSAL CONTROL (VERSION X.02) 8504105 REV... User manual

TJERNLUND

TJERNLUND DRAFT INDUCER DJ-3 User manual

TJERNLUND

TJERNLUND DB2 DUCT BOOSTER User manual

TJERNLUND

TJERNLUND UC1 User manual

TJERNLUND

TJERNLUND CS1 User manual

TJERNLUND

TJERNLUND SS1 SIDESHOT (DISCONTINUED VERSION-PRE UC1 UNIVERSAL CONTROL) 8504041 REV A... User manual

TJERNLUND

TJERNLUND HSJ User manual

TJERNLUND

TJERNLUND V1, V1D, V2D CRAWL SPACE VENTILATORS 8500720 User manual

TJERNLUND

TJERNLUND EA5 DUCT BOOSTER FAN 8504029 User manual

TJERNLUND

TJERNLUND XCHANGER X2D User manual

TJERNLUND

TJERNLUND VP-2, VP-3 8500567 0702 User manual

TJERNLUND

TJERNLUND DC BAROMETRIC DRAFT CONTROL LIT 8500490 REV B... User manual

TJERNLUND

TJERNLUND IN-FORCER PAI-3 User manual

TJERNLUND

TJERNLUND HSJ User manual

Popular Fan manuals by other brands

ELTA FANS

ELTA FANS H03VV-F installation guide

Hunter

Hunter 20714 Owner's guide and installation manual

Emerson

Emerson CARRERA VERANDA CF542ORB00 owner's manual

Hunter

Hunter Caraway Owner's guide and installation manual

Panasonic

Panasonic FV-15NLFS1 Service manual

Kompernass

Kompernass KH 1150 operating instructions

VES

VES FALA100/12V/TR Original instructions

Vertiv

Vertiv Liebert DCD user manual

Westinghouse

Westinghouse GFP Series owner's manual

Venmar

Venmar KUBIX HRV PLUS Series user guide

Maico

Maico ECR 31 installation instructions

Sonnenkonig

Sonnenkonig Dinky instruction manual

S&P

S&P ECOWATT HXBR manual

Wider

Wider IMP03369BH instruction manual

Panasonic

Panasonic F-60DHN Operating and installation instructions

Hinkley

Hinkley HIGHLAND instruction manual

Broan

Broan 766BN installation guide

Premium

Premium PFS16022 Use manual