Titan TTB669PRW User manual
Original Instructions_TTB669PRW_GB_V3_150818
TTB669PRW
High Pressure
Cleaner 1800W
Barcode: 5052931516438
Ref. No.: 5014J
WARNING: Read the instructions before using the product!
O
F
F
/
O
I
/
O
N
MNL_TTB669PRW_TIT_GB_V03_150818.indd 1 8/18/15 4:16 PM
Congratulations on your purchase of a power tool from
Kingfisher International Products Limited. We want you to continue
getting the best performance from it so this handbook includes
information on safety, handling and care. Please retain this handbook
in case you need to refer to any of the information in the future.
Your power tool comes with a 2 years guarantee, so
should it develop a fault within this period contact your retailer.
GUARANTEE
This product carries a guarantee of 2 years. If your product develops
the item was purchased.
- Fair wear and tear
- Misuse or abuse
- Lack of routine maintenance
- Failure of consumable items (Such as batteries)
- Accidental damage
- Cosmetic damage
- Failure to follow manufacturer’s guidelines
- Loss of use of the goods
This guarantee does not affect your statutory rights. This guarantee is only valid in
the UK.
For any enquiries relating to the guarantee please refer to your retailer.
High Pressure Cleaner 1800W - TTB669PRW
MNL_TTB669PRW_TIT_GB_V03_150818.indd 2 8/18/15 4:16 PM
EN
03
These instructions are for your safety. Please read through them
thoroughly before use and retain them for future reference.
Let’s
get started...
42
43
41
32
36
28
In more detail...
Product functions
Operation
Care and maintenance
Troubleshooting
Recycling and disposal
EC declaration of conformity
27
03
04
12
15
Getting started...
Safety information
Your product
Before you start
MNL_TTB669PRW_TIT_GB_V03_150818.indd 3 8/18/15 4:16 PM
04
Getting started...
EN TTB669PRW by TITAN
Safety information
Safety warnings
>Product shall not be used by children. Children should
be supervised to ensure that they do not play with the
product.
>This product can be used by people with reduced
physical, sensory or mental capabilities or lack of
experience and knowledge if they have been given
supervision or instruction concerning the use of the
product in a safe way and understand the hazards
involved.
IMPORTANT
READ CAREFULLY BEFORE USE
KEEP FOR YOUR REFERENCE
High pressure cleaner safety warnings
>If the power cord is damaged, it must be replaced by
the manufacturer, its service agent or similarly qualied
persons in order to avoid a safety hazard.
>WARNING: This product has been designed for use
with the cleaning agent supplied or recommended by
the manufacturer. The use of other cleaning agents
or chemicals may adversely affect the safety of the
product.
>WARNING: High pressure jets can be dangerous if
subject to misuse. Never direct the jet at persons, live
electrical equipment or the product itself.
>WARNING: Do not use the product within range of
persons unless they wear protective clothing.
>WARNING: Wear appropriate Personnel Protection
Equipment (PPE) while operating the product.
MNL_TTB669PRW_TIT_GB_V03_150818.indd 4 8/18/15 4:16 PM
05
Getting started...
EN
TTB669PRW by TITAN Safety information
>WARNING: Do not direct the jet against yourself or
others in order to clean clothes or foot-wear.
>WARNING: Risk of explosion – Do not spray ammable
liquids.
>WARNING: This product shall not be used by children
or untrained personnel.
>WARNING: High pressure hoses, ttings and couplings
are important for the safety of the product. Use only
hoses, ttings and couplings recommended by the
manufacturer.
>WARNING: Only use original spare parts from the
manufacturer or approved by the manufacturer
to ensure product safety. The use of non-original
accessories and any other accessories not specically
intended for the model in question is prohibited.
>WARNING: Consider water that has own through
backow preventers to be non-potable.
>WARNING: Switch the product off and disconnect it
from the power supply removing the power plug from the
socket outlet before assembly, cleaning, adjustments,
maintenance, storage and transportation or converting
the product to another function.
>WARNING: Do not use the product if the power cord or
any part of the product is damaged, e. g. safety devices,
high pressure hoses, trigger gun. Never use the product
if the high pressure hose is damaged.
MNL_TTB669PRW_TIT_GB_V03_150818.indd 5 8/18/15 4:16 PM
06
Getting started...
EN TTB669PRW by TITAN
Safety information
Safety warnings
>WARNING: Inadequate extension cords can be
dangerous. If an extension cord is used, it shall be
suitable for outdoor use, and the connection has to be
kept dry and off the ground. The plug and socket must
be of watertight construction. It is recommended that
this is accomplished by means of a cord reel which
keeps the socket at least 60 mm above the ground.
>WARNING Always switch off the mains disconnecting
switch when leaving the product unattended.
>Have the electric supply connection to be made
by a qualied electrician and in compliance with
IEC 60364-1. It is recommended that the electric supply
to this product should include either a residual current
device that will interrupt the supply if the leakage current
to earth exceeds 30 mA for 30 ms or a device that will
prove the earth circuit.
>Never use the product with inammable or toxic liquids,
or liquids with characteristics incompatible with its
proper operation.
>Never use the product outdoors in the rain.
>Never touch the plug and/or socket with wet hands.
>Never lock the gun trigger in the operating position.
>Check that the product is tted with its rating label;
contact your dealer if it is missing. Products without
rating label must not be used, since they cannot be
identied and are potentially hazardous.
>Never tamper with or adjust the setting of the safety
valve or the safety devices.
>Never change the original diameter of the adjustable
nozzle.
MNL_TTB669PRW_TIT_GB_V03_150818.indd 6 8/18/15 4:16 PM
07
Getting started...
EN
TTB669PRW by TITAN Safety information
>Never leave the product unattended when it is
connected to the power supply.
>Never move the product by pulling on the electrical
power cord.
>Do not allow vehicles to drive over the pressure hose.
>Do not move the product by pulling on the pressure
hose.
>When directed towards tyres, tyre valves or other
pressurised components, the high pressure jet is
potentially dangerous. Do not apply a jet stream and
always keep the nozzle at a distance of at least 30 cm
during cleaning.
>Protect all electrical conductors against the water jet.
>During start-up, the product may generate interference
on the electricity supply system.
>High pressure may cause parts to rebound: wear all the
protective clothing and equipment needed to ensure the
operator’s safety.
>Be aware of kick-back: grip the gun rmly when pulling
the trigger.
>Comply with the regulations of the local water supply
authority. Under EN 12729 (Type BA) the product can
be connected directly to the mains drinking water supply
only if the supply hose is tted with a backow preventer
device with drainage facility.
>Have maintenance and/or repair work on electrical
components to be carried out by qualied staff.
>Discharge residual pressure before disconnecting the
hose from the product.
>Check before each use, and at regular intervals, that all
metal fasteners are tight and the product’s components
are in good condition; inspect for broken or worn parts.
MNL_TTB669PRW_TIT_GB_V03_150818.indd 7 8/18/15 4:16 PM
08
Getting started...
EN TTB669PRW by TITAN
Safety information
Safety warnings
>Use only detergents compatible with the high pressure
hose / electrical power cord cladding materials.
>Use only authorised electrical extension cords with
suitable conductor gauge.
Maintenance and storage
>Disconnect the product from the power supply and
check for damage after use.
>Disconnect the product from the power supply before
carrying out maintenance or cleaning work.
>Use only the manufacturer’s recommended replacement
parts and accessories.
>Inspect and maintain the product regularly. Have the
product repaired only by an authorised service centre or
similar qualied specialist.
>When not in use, store the product out of the reach of
children.
Vibration and noise reduction
To reduce the impact of noise and vibration emission, limit
the time of operation, use low-vibration and low-noise
operating modes as well as wear personal protective
equipment.
Take the following points into account to minimise the
vibration and noise exposure risks:
>Only use the product as intended by its design and
these instructions.
>Ensure that the product is in good condition and well
maintained.
>Use correct accessories for the product and ensure they
in good condition.
MNL_TTB669PRW_TIT_GB_V03_150818.indd 8 8/18/15 4:16 PM
09
Getting started...
EN
TTB669PRW by TITAN Safety information
>Keep tight grip on the handles/grip surface.
>Maintain this product in accordance with these
instructions and keep it well lubricated (where
appropriate).
>Plan your work schedule to spread any high vibration
tool use across a longer period of time.
Emergency
Familiarise yourself with the use of this product by
means of this instruction manual. Memorise the
safety directions and follow them to the letter. This
will help to prevent risks and hazards.
>Always be alert when using this product so that
you can recognise and handle risks early. Fast
intervention can prevent serious injury and damage to
property.
>Switch off and disconnect from the power supply if
there are malfunctions. Have the garden power tool
checked by a qualied professional and repaired, if
necessary, before you operate it again.
Residual risks
Even if you are operating this product in accordance
with all the safety requirements, potential risks of
injury and damage remain. The following dangers
can arise in connection with the structure and design
of this product:
>Health defects resulting from vibration emission if the
product is being used over long periods of time or not
adequately managed and properly maintained.
>Danger of injury and property damage caused by ying
objects.
>Injuries and damage to property due to broken
accessories or the sudden impact of hidden objects
during use.
MNL_TTB669PRW_TIT_GB_V03_150818.indd 9 8/18/15 4:16 PM
TTB669PRW by TITAN
Safety information
EN
Getting started...
10
Safety warnings
WARNING! This product produces an
electromagnetic eld during operation! This eld
may under some circumstances interfere with
active or passive medical implants! To reduce
the risk of serious or fatal injury, we recommend
persons with medical implants to consult their
doctor and the medical implant manufacturer
before operating this product!
Symbols
On the product, the rating label and within these instructions you will nd among
others the following symbols and abbreviations. Familiarise yourself with them to
reduce hazards like personal injuries and damage to property.
V~ Volt, (alternating voltage) bar Pressure unit
Hz Hertz °C Degree Celsius
W Watt Ø Diameter
l/min Litres per minute mm Millimetre
m Metres kg Kilogram
N Newton dB(A) Decibel (A-rated)
MPa Mega Pascal, pressure
unit
m/s² Metres per second
squared
IPX5 The product is protected against water (out of a nozzle) from all
directions.
yyWxx Manufacturing date code; year of manufacturing (20yy) and week
of manufacturing (Wxx).
Lock / to tighten or secure. Unlock / to loosen.
Note / Remark. Caution / Warning.
Read the instruction
manual.
Wear hearing protection.
MNL_TTB669PRW_TIT_GB_V03_150818.indd 10 8/18/15 4:16 PM
Table of contents
Other Titan Pressure Washer manuals
Titan
Titan TTI855PRW User manual
Titan
Titan Compact 190 User manual
Titan
Titan TPW-2200 User manual
Titan
Titan 1800M User manual
Titan
Titan Elite 3500 User manual
Titan
Titan TTM2700PRW User manual
Titan
Titan TTB2200PRW-DSS User manual
Titan
Titan PowerLiner 3100 User manual
Titan
Titan TTB2700PRW User manual
Titan
Titan TTB1300PRW User manual
