Thrustmaster T3PA-PRO User manual

- USER MANUAL

- MANUEL DE L’UTILISATEUR

- BENUTZERHANDBUCH

- HANDLEIDING

- MANUALE D’USO

- MANUAL DEL USUARIO

- MANUAL DO UTILIZADOR



РУКОВОДСТВО ПОЛЬЗОВАТЕЛЯ

 ΕΓΧΕΙΡΙΙΟ ΧΡΗΣΗΣ

KULLANIM KILAVUZU

INSTRUKCJAOBSŁUGI

1/17

For: PC – PlayStation®3 – PlayStation®4 – Xbox One

User Manual

2/17

TECHNICAL FEATURES

12 lateral arches (left and right)

24 M8-type Allen screws

(to attach the lateral arches)

3 2 plastic washers

(to attach the lateral arches)

46 mm Allen key

(to attach the lateral arches)

5Removable CONICAL RUBBER BRAKE MOD

6Fastening and adjustment nut

(to attach the CONICAL RUBBER BRAKE

MOD)

7Backup

(various extra screws and nuts)

8 4 M3-type Allen screws

(to attach the removable metal stop)

3/17

11 Pedal set cable and connector

15 Removable foot rest

16 Lateral arches when installed

17 Removable pedal heads

18 Removable SPRING BRAKE MOD

(not installed by default)

19 Included 2 mm Allen key

20 Included 2.5 mm Allen key

17 Metal head

21 Plastic head support

22 Metal pedal arm

23 Removable metal stop

(not installed by default)

4/17

WARNING

Before using this product, be sure to read these instructions carefully and save them for future reference.

For safety reasons, never use the pedal set with bare feet or while wearing

only socks on your feet.

THRUSTMASTER® DISCLAIMS ALL RESPONSIBILITY IN THE EVENT OF

INJURY RESULTING FROM USE OF THE PEDAL SET WITHOUT SHOES.

Warning – Pedal set pinching hazard during gaming sessions

* Keep the pedal set out of the reach of children.

* During gaming sessions, never place your fingers or thumbs on or near the sides of the pedals.

* During gaming sessions, never place your fingers or thumbs on or near the rear base of the pedals.

* During gaming sessions, never place your fingers or thumbs on or near the front base of the pedals.

NEVER

5/17

AUTOMATIC CALIBRATION OF PEDALS

IMPORTANT:

- Never connect or disconnect the pedal set from the base of the wheel when the wheel is

connected to the console or PC, or during gaming sessions, to avoid calibration problems.

= Always connect the pedal set to the wheel before connecting the wheel to the console or PC.

- Once the wheel has self-calibrated and the game has started, the pedals automatically calibrate

themselves after being pressed a few times.

- Never press on the pedals when the wheel is self-calibrating or when your game is starting up, to

avoid calibration problems.

- If the pedals are not functioning correctly or appear to be improperly calibrated, power off your

console, completely disconnect your wheel, then reconnect all of the cables (including the power

supply cable and the pedal set cable), power the console back on and restart your game.

ATTACHING THE PEDAL SET TO A COCKPIT

- Attach the pedal set using the small screw threads located on the underside of the pedal set.

- Screw M6 screws (not included) into the cockpit’s pedal support plate and into the small screw

threads located on the underside of the pedal set.

Important: The length of the M6 screws must not exceed the thickness of the cockpit’s pedal

support plate plus an additional 10 mm, to avoid damaging the pedal set’s internal components.

To be handled only by users

16 years of age or older

HEAVY PRODUCT

Be careful not to drop the product on

yourself or on anyone else!

6/17

INSTALLING THE 2 LATERAL ARCHES (1)

Positions of the pedal set’s 2 lateral screw threads (1 upper + 1 lower) in order to attach the 2 lateral

arches (1):

- Place one of the plastic washers (3) on the screw thread located on the lower part of the pedal set.

- Next, place one of the arches (1) on the screw thread located on the upper part of the pedal set

and on the plastic washer (3).

- Attach the arch (1) using 2 of the M8-type Allen screws (2)and the 6 mm Allen key (4) by turning

the screws clockwise.

- Repeat this procedure on the other side of the pedal set to attach the second arch.

You are now ready to play!

7/17

CONFIGURING THE PEDALS

Each of the 3 pedals features:

- A metal head (17) with several perforations

(9 for the accelerator – 6 for the brake – 6 for the clutch)

- A plastic head support (21) (between the head and the arm) with 4 perforations

- A metal pedal arm (22) with 4 perforations

CAUTION: To avoid any calibration problems, always disconnect the USB cable

from your steering wheel before adjusting the settings on your pedal set.

Adjusting the pedal HEIGHT

- Using the included 2.5 mm Allen key (20), loosen and remove the 2 screws holding the metal

head (17) and its support (21) in place.

- Once this is done, select the height of your choice and then replace and re-tighten the screws.

Examples with the accelerator pedal:

Low position

Medium position (default)

High position

Very high position

Number of possible height positions per pedal:

- 4 for the accelerator pedal

- 2 for the brake pedal

- 2 for the clutch pedal

8/17

Adjusting the pedal SPACING

- Using the included 2.5 mm Allen key (20), loosen and remove the 2 screws holding the metal

head (17) and its support (21) in place.

- Once this is done, select the position of your choice (to the left, in the center or to the right) and

then replace and re-tighten the screws.

Examples with the brake pedal:

Left position Center position (default) Right position

Number of possible spacing positions per pedal:

- 3 for the accelerator pedal

- 3 for the brake pedal

- 3 for the clutch pedal

Adjusting the pedal TILT

- Using the included 2.5 mm Allen key (20), loosen and remove the 2 screws holding the metal

head (17) and its support (21) in place.

- Once this is done, turn the plastic head support (21) 180°, and then replace and re-tighten the

screws.

Examples with the accelerator pedal:

Less tilted position More tilted position (default)

Number of possible tilt positions per pedal:

- 2 for the accelerator pedal

- 2 for the brake pedal

- 2 for the clutch pedal

9/17

Adjusting the range of TRAVEL and resistance FORCE of the brake pedal (with

no BRAKE MOD installed)

- Install the metal stop (23) at the rear of the brake pedal arm.

- Select your choice of position (Long, Medium or Short range of travel), and then tighten the 4 M3-

type Allen screws (8) using the included 2.5 mm Allen key (20).

Long travel and strong Medium travel and Short travel and

resistance (default)medium resistance weak resistance

Long travel and strong Short travel and

resistance (default) weak resistance

Number of possible travel or resistance positions:

- Long travel with resistance of approximately 22 lbs / 10 kg

- Medium travel with resistance of approximately 18.7 lbs / 8.5 kg

- Short travel with resistance of approximately 15.4 lbs / 7 kg

Note: the longer the travel, the stronger the pedal’s resistance (and vice versa).

Table of contents

Languages:

Other Thrustmaster Video Gaming Accessories manuals

Thrustmaster

Thrustmaster FOOTBALL STADIUM Instructions for use

Thrustmaster

Thrustmaster SimTask Steering Kit User manual

Thrustmaster

Thrustmaster T300 RS User manual

Thrustmaster

Thrustmaster Enzo Ferrari 2-in-1 User manual

Thrustmaster

Thrustmaster T500 RS User manual

Thrustmaster

Thrustmaster T.16000M User manual

Thrustmaster

Thrustmaster TX Racing Wheel Use and care manual

Thrustmaster

Thrustmaster T2PA User manual

Thrustmaster

Thrustmaster T-GT II User manual

Thrustmaster

Thrustmaster Rechargeable Wireless Dual Trigger 2-in-1 User manual

Thrustmaster

Thrustmaster T300 User manual

Thrustmaster

Thrustmaster TOP GUN FOX 2 PR FLIGHT STICK Instructions for use

Thrustmaster

Thrustmaster T248 User manual

Thrustmaster

Thrustmaster T-CHARGE Duo NW User manual

Thrustmaster

Thrustmaster VIPER TQS User manual

Thrustmaster

Thrustmaster Ferrari 458 Italia TX User manual

Thrustmaster

Thrustmaster TSS HANDBRAKE User manual

Thrustmaster

Thrustmaster T128 User manual

Thrustmaster

Thrustmaster TH8S Shifter Add-on User manual

Thrustmaster

Thrustmaster T300RS User manual

Thrustmaster

Thrustmaster T60 User manual

Thrustmaster

Thrustmaster T3PM User manual

Thrustmaster

Thrustmaster TX Racing Wheel User manual

Thrustmaster

Thrustmaster FreeStyler Board Instructions for use

Thrustmaster T3PA-PRO User manual

Popular Video Gaming Accessories manuals by other brands