Thermaltake Pacific RL360 User manual

Cautions:

Make sure there's enough space when you start to set up your LCS products.

It requires a hard tube bending kit to bend and install the tube, ex. Pacific Hard Tube Bending Kit.

This product is intended for installation only by expert users. Please consult with a qualified technician for installation.

Improper installation may result in damage to your equipment.

1. Please carefully read the manual before beginning the installation process !

2. It is strongly recommended to use market proven pre-mix coolant, such as Thermaltake Coolant 1000.

3. DO NOT USE any kind of alcohol or alcohol derivatives with this reservoir or the acrylic tube may crack and fail !

Do not clean it using alcohol either !

Pacific

RL360

Before Installation

Water Cooling Kit

Cautions: Make sure there's enough space when you start set up the LCS product

To ensure a clean loop, flush and rinse your radiators

and water blocks with distilled water before using.

Make sure the fittings are screwed securely when

placing them onto the radiator.

Attach the fans to the radiator

Choose the proper way to mount the pump and reservoir

by referring to the manual (suggest vertical palcement) Attach fittings onto the pump and reservoir

Attach the fittings to the inlet and outlet of the

waterblock.

Attach the waterblock onto the motherboard by

referring to the enclosed manual.

Radiators Case Fan

Pump and Reservoir

Water Blocks

Installation Walkthrough (Example: Core V51)

Place the motherboard into the case. Position the radiator. Attach the pump and reservoir into

the chosen locations.

Hard Tube RGB

Cutting and Attaching the Tubing

Push the end of the tubing over the fitting ;

make sure the tubing is a tight fit. Slide the

cap over the fitting and rotate it clockwise

until the tubing is sealed in place.

Connect the tubing and check all the

fittings are sealed. The loop order:

Pump Outlet > Radiator

Connect the tubing and check all the

fittings are sealed. The loop order:

Water black > Radiator

onnect the tubing and check all the

fittings are sealed. The loop order:

Water black > Reservoir Inlet

Filling the System

Cautions:

1. Before filling the system, please make

sure that each fitting as well as unused

ports are completely sealed.

2. If there is any case of leaking,

immediately turn off the power and

clean the leak

3. If there's any related electronic parts

stained on liquid coolant, make sure to

completely clean and dry the

components. And then make sure they

all work well.

After switching off the power supply,

connect the PSU power cord and

product cables.

Use the refill bottle to fill coolant into the reservoir

Place your PSU outside of the case and attach it to

the pumps 4pin molex connector, turn on the power

of PSU and make the rest of the system fills up.

Thermaltake recommends the following steps to be taken after completing your water loop setup

1. It is strongly recommended to use market proven pre-mix coolant, such as Thermaltake Coolant 1000. It offers great performance

while preventing the entire cooling system – copper, brass, nickel, aluminum, and steel – from corrosion.

2. Fill the reservoir with coolant and cycle the power on and off several times while the pump pushing the coolant into the loop.

3. DO NOT let the pump run dry, when there is no liquid entering the pump turn off your power immediately

4. Fill the reservoir to the top as it will prevent air from going into the pump

5. If necessary tilt the system slightly from side to side to bleed the air out of the loop.

6. Place some paper towels under fittings and joining points to test for leaks.

7. Run the loop with the fill port open for about 24 hours to completely bleed the air out of the loop.

Table of contents

Other Thermaltake Computer Hardware manuals

Thermaltake

Thermaltake Bigwater 780e CL-W0169 User manual

Thermaltake

Thermaltake M360 Plus User manual

Thermaltake

Thermaltake CLP0537 User manual

Thermaltake

Thermaltake Pacific MX1 Plus User manual

Thermaltake

Thermaltake Pacific V-RTX 3080/3090 Plus User manual

Thermaltake

Thermaltake A2016 User manual

Thermaltake

Thermaltake Pacific V-RTX 2070 Super Plus User manual

Thermaltake

Thermaltake TOUGHLIQUID Ultra 420 User manual

Thermaltake

Thermaltake Floe RC Ultra 360 User manual

Thermaltake

Thermaltake Pacific V-RTX 3070 Plus User manual

Thermaltake

Thermaltake Pacific V-RX 5700 Plus Series User manual

Thermaltake

Thermaltake Pacific PR12-D5 Plus User manual

Thermaltake

Thermaltake Pacific W5 User manual

Thermaltake

Thermaltake Pacific MX2 Plus User manual

Thermaltake

Thermaltake M900 XXL RGB User manual

Thermaltake

Thermaltake Water 3.0 Extreme S User manual

Thermaltake

Thermaltake Pacific W7 Plus User manual

Thermaltake

Thermaltake Pacific V-RTX 4090 Plus User manual

Thermaltake

Thermaltake Pacific V-RTX 4090 Plus User manual

Thermaltake

Thermaltake Pacific Core P8 DP-D5 Plus User manual

Thermaltake

Thermaltake CPU Cooler Socket 478 User manual

Thermaltake

Thermaltake Floe Ultra 240 RGB User manual

Thermaltake

Thermaltake TH120 ARGB Sync User manual

Thermaltake

Thermaltake TH240 ARGB Sync User manual

Popular Computer Hardware manuals by other brands

EMC2

EMC2 VNX Series Hardware Information Guide

Panasonic

Panasonic DV0PM20105 Operation manual

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 user manual

Gigabyte

Gigabyte B660M DS3H AX DDR4 user manual

Raidon

Raidon iT2300 Quick installation guide

National Instruments

National Instruments PXI-8186 user manual

Hauppauge

Hauppauge WinTV-HVR-2250 Quick installation guide

Kontron

Kontron CP6002 user guide

Manhattan

Manhattan 702843 user manual

Aphex

Aphex 230 instruction manual

AMD

AMD Phenom II Product data sheet

Intel

Intel NUC 12 Pro user guide

dbx

dbx Zone Pro 1260 user manual

Galaxy

Galaxy GHDX2-2430S-24F4D Installation and hardware reference manual

Intel

Intel AXXRMFBU4 Quick installation user's guide

Kontron

Kontron DIMM-PC/MD product manual

ST X-NUCLEO-SAFEA1B How to use

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 installation manual