IMPORTANT INFORMATION:
Please read these instructions thoroughly before use. Failure to follow instructions may
result in equipment damage or failure, losses, injury or death.
DANGER:
To avoid possible electric shock:
• If the power cord has been damaged, DO NOT operate, the ClearVac™ Vacuum should be replaced.
• Prior to installation, inspect the ClearVac™ Vacuum to ensure there was no damage during transportation.
• If the ClearVac™ Vacuum falls into the water, DO NOT reach for it. First unplug and then retrieve it.
• Close supervision is necessary when used near children.
WARNING:
To reduce the risk of electric shock:
• Connect only to a properly grounded receptacle, which is serviced by a Ground Fault Circuit Interrupter
and never remove the ground pin from the plug.
• Provide a“drip loop”for the power cord. This is a loop in the cord below the level of the receptacle or plug
that prevents water from traveling along the cord in the direction of the receptacle.
• ALWAYS unplug the ClearVac™ Vacuum from the power source when it is not in use, and before installing,
removing or servicing the ClearVac™ Vacuum components.
• If an extension cord is necessary, use only a 10 or 12 gauge outdoor rated extension cord no longer than 50
feet. A cord may overheat if the cord is rated for less amperes or watts than the unit rating.
• DO NOT immerse the ClearVac™ Vacuum or plug in water or attempt to use a wet plug.
• The ClearVac™ Vacuum is NOT suitable for use in swimming pools, swimming ponds, or other situations
where bodily contact is made with the water. Although the ClearVac™ Vacuum is designed for outdoor use,
it should never be submerged in water.
CAUTION:
To reduce the risk of equipment damage or failure:
• DO NOT place ClearVac™ Vacuum near ammable or other dangerous materials or objects.
• ClearVac™ Vacuum is NOT submersible; do not place ClearVac™ Vacuum where it might contact or fall into
the water.
• DO NOT operate during freezing conditions. Drain the ClearVac™ Vacuum and store in a protected location.
• DO NOT use the ClearVac™ Vacuum to vacuum ammable, toxic or volatile substances.
• Be sure to clean debris from the vacuum after each use, and before storing the unit, to avoid poor
performance during future use.
IMPORTANT:
The Pond Guy® is not responsible for equipment damage or failure, losses, injury or death resulting from
failure to follow safety precautions, misuse or abuse of equipment.
Package Contents
CLEARVAC™:
ClearVac™ Note: Some of the components may be packaged inside the vacuum chamber
A1 - ClearVac ™Vacuum F1 - 13’Suction Hose
B4 - Suction ExtensionTube (Black) G1 - 8’Discharge Hose
C1 - Suction ExtensionTube (Clear) H1 -Plug
D4 - InterchangableNozzles
(String Algae, Narrow,Wide & Adjustable Gravel Nozzles) I2 -Wheels
E1 - DebrisBag J1 -IntakeDistributor
TECHNICALSPECS :
MODEL VOLTS MOTOR SIZE MAX OPERATING DEPTH POWER CORD LENGTH
ClearVac™115V 1600 Watts 6’ 13’
A
B
C
D
FG
I
J
E
H
thepondguy.com | 866-POND-HELP (766-3435) 15425 Chets Way | Armada, MI 48005
2 3
