TEXIO ASR Series User manual

B71-0497-01

INSTRUCTION MANUAL

AC/DC POWER SOURCE

ASR SERIES

ASR501-351

ASR102-351

ASR501-351G

ASR102-351G

■ About Brands and Trademarks

“TEXIO” is the product brand name of our industrial electronic devices.

All company names and product names mentioned in this manual are the

trademark or the registered trademark of each company or group in each

country and region.

■ About the Instruction Manual

Permission from the copyright holder is needed to reprint the contents of this

manual, in whole or in part. Be aware that the product specifications and the

contents of this manual are subject to change for the purpose of

improvement.

■ About firmware version

This user manual is required firmware version 1.07 or higher.

 
 
CONTENTS 
1. GETTING STARTED .............................................1 
1-1. ASR Series Overview....................................1 
1-1-1. Series lineup....................................................................1 
1-1-2. Operating Area ................................................................2 
1-1-3. Main Features..................................................................4 
1-1-4. Accessories .....................................................................5 
1-2. Appearance ..................................................6 
1-2-1. Front Panel ......................................................................6 
1-2-2. Rear Panel.....................................................................11 
1-2-3. Status Bar Icons ............................................................15 
1-3. Theory of Operation ....................................16 
1-3-1. Glossary.........................................................................16 
1-3-2. Alarms............................................................................18 
1-3-3. Considerations...............................................................20 
1-3-4. Grounding......................................................................22 
2. OPERATION.......................................................23 
2-1. Set Up........................................................23 
2-1-1. Power Up .........................................................................23 
2-1-2. How to Use the Instrument ..............................................24 
2-1-3. Output Terminals..............................................................27 
2-1-4. Installing GET-003 Box Series.........................................30 
2-1-5. Using the Rack Mount Kit.................................................34 
2-1-6. Reset to Factory Default Settings ....................................36 
2-1-7. View Firmware Version and Serial Number.....................37 
2-1-8. LCD Configuration............................................................38 
2-1-9. USB Driver Installation.....................................................39 
2-1-10. Air filter Installation.........................................................41 
2-1-11. Wire Gauge Considerations...........................................43 

 
 
2-2. Menu Tree ..................................................45 
2-2-1. Main Page......................................................................46 
2-2-2. Function Keys................................................................47 
2-2-3. Menu..............................................................................49 
3. Basic Operation ................................................50 
3-1. Basic setting...............................................50 
3-1-1. Select the Output Mode ...................................................50 
3-1-2. Select the Voltage Range ................................................51 
3-1-3. Select the Output Waveform............................................52 
3-1-4. Setting the Output Voltage Limit ......................................53 
3-1-5. Setting the Output AC/DC Voltage & Gain.......................57 
3-1-6. Setting the Frequency Limit .............................................61 
3-1-7. Setting the Output Frequency & Signal............................64 
3-1-8. Setting the Peak Current Limit.........................................66 
3-1-9. Setting the Output Current Level .....................................69 
3-1-10. Setting the Output On Phase.........................................71 
3-1-11. Setting the Output Off Phase.........................................73 
3-1-12. Switch the Display Modes..............................................75 
3-1-13. Using the Measurement Function..................................78 
3-1-14. Switch the Measurement Format...................................81 
3-1-15. Panel Lock .....................................................................83 
3-1-16. Alarm Clear ....................................................................84 
3-1-17. Turning the Output On/Off..............................................85 
3-2. Advanced Settings ......................................86 
3-2-1. Using the Remote Sense Function................................86 
3-2-2. Preset Settings ..............................................................89 
4. EXTERNAL CONTROL .......................................94 
4-1. Using External Control I/O...........................94 
4-2. Using External Signal Input Function............96 
4-2-1. EXT GAIN - AC+DC-EXT and AC-EXT mode...............97 
4-2-2. EXT ADD - AC+DC-ADD and AC-ADD mode...............98 

 
 
4-2-3. EXT Sync - AC+DC-Sync and AC-Sync mode..............98 
4-3. Arbitrary Waveform .....................................99 
4-3-1. Compiling Arbitrary Waveform Input..............................99 
4-3-2. Manage Arbitrary Waveform Settings..........................106 
5. MISCELLANEOUS............................................109 
5-1. T Ipeak, hold.............................................109 
5-2. IPK CLR ................................................... 110 
5-3. Power ON..................................................111 
5-4. Buzzer...................................................... 112 
5-5. Remote Sense .......................................... 113 
5-6. Slew Rate Mode........................................ 116 
5-7. Output Relay ............................................ 117 
5-8. THD Format.............................................. 118 
5-9. External Control I/O ..................................120 
5-10.V Unit.......................................................121 
6. TEST MODE FUNCTION...................................123 
6-1. Sequence Mode........................................123 
6-1-1. Sequence Mode Overview...........................................123 
6-1-2. Sequence Settings.......................................................129 
6-1-3. Save a Sequence to Local Memory.............................134 
6-1-4. Recall a Sequence from Local Memory.......................134 
6-1-5. Manage Sequence Settings ........................................135 
6-1-6. Running a Sequence...................................................140 
6-2. Simulate Mode..........................................142 
6-2-1. Simulate Mode Overview.............................................142 
6-2-2. Simulate Settings.........................................................146 
6-2-3. Save a Simulation to Local Memory............................150 
6-2-4. Recall a Simulation from Local Memory......................150 
6-2-5. Manage Simulation Settings........................................151 
6-2-6. Running a Simulation...................................................154 
7. COMMUNICATION INTERFACE ........................156 
7-1. Interface Configuration..............................156 

 
 
7-1-1. Configure Ethernet Connection ...................................156 
7-1-2. USB Remote Interface.................................................158 
7-1-3. USB Remote Control Function Check.........................159 
7-1-4. RS-232C Remote Interface (G type)...........................160 
7-1-5. RS-232C Remote Control Function Check..................162 
7-1-6. Using Realterm to Establish a Remote Connection ....163 
7-1-7. GP-IB Remote Interface (G type) ................................166 
7-1-8. GP-IB Function Check.................................................167 
7-1-9. Web Server Remote Control Function Check .............170 
7-1-10. Socket Server Function Check....................................171 
8. FAQ ................................................................. 176 
9. APPENDIX .......................................................177 
9-1. Firmware Update ......................................177 
9-2. Factory Default Settings ............................179 
9-3. Error Messages & Messages .....................183 
9-4. Specifications ...........................................189 
9-4-1. Electrical specifications................................................189 
9-4-2. General Specifications.................................................193 
9-4-3. Others..........................................................................194 
9-4-4. External Signal Input (AC+DC-EXT, AC-EXT Mode)..194 
9-4-5. External Signal Input (AC+DC-ADD, AC-ADD Mode).195 
9-4-6. External Synchronous Signal or Line (AC+DC-SYNC, AC-
SYNC)....................................................................................196 
9-5. ASR Dimensions.......................................197 
 

USING THE PRODUCT SAFELY

■ Preface

To use the product safely, read instruction manual to the end. Before using this

product, understand how to correctly use it. If you read the manuals but you do

not understand how to use it, ask us or your local dealer. After you read the

manuals, save it so that you can read it anytime as required.

■ Pictorial indication

The manuals and product show the warning and caution items required to

safely use the product. The following pictorial indication is provided.

Pictorial

indication

Some part of this product or the manuals may show this

pictorial indication. In this case, if the product is incorrectly

used in that part, a serious danger may be brought about

on the user's body or the product. To use the part with this

pictorial indication, be sure to refer to the manuals.

WARNING

If you use the product, ignoring this indication, you may get

killed or seriously injured. This indication shows that the

warning item to avoid the danger is provided.

CAUTION

If you incorrectly use the product, ignoring this indication,

you may get slightly injured or the product may be

damaged. This indication shows that the caution item to

avoid the danger is provided.

Please be informed that we are not responsible for any damages to the user or

to the third person, arising from malfunctions or other failures due to wrong use

of the product or incorrect operation, except such responsibility for damages as

required by law.

USING THE PRODUCT SAFELY

WARNING

CAUTION

■ Do not remove the product's covers and panels

Never remove the product's covers and panels for any purpose.

Otherwise, the user's electric shock or fire may be incurred.

■ Warning on using the product

Warning items given below are to avoid danger to user's body and life and

avoid the damage or deterioration of the product. Use the product, observing

the following warning and caution items.

■ Warning items on power supply

● Power supply voltage

The rated power supply voltages of the product are 100VAC. The rated

power supply voltage for each product should be confirmed by reading the

label attached on the back of the product or by the “rated” column shown in

the instruction manual. The specification of power cord attached to the

products is rated to 125VAC for all products which are designed to be used

in the areas where commercial power supply voltage is not higher than

125VAC. Accordingly, you must change the power cord if you want to use

the product at the power supply voltage higher than 125VAC. If you use the

product without changing power cord to 250VAC rated one, electric shock or

fire may be caused. When you used the product equipped with power supply

voltage switching system, please refer to the corresponding chapter in the

instruction manuals of each product.

● Power cord

(IMPORTANT) The attached power cord set can be used for

this device only.

If the attached power cord is damaged, stop using the product and call us

or your local dealer. If the power cord is used without the damage being

removed, an electric shock or fire may be caused.

● Protective fuse

If an input protective fuse is blown, the product does not operate. For a

product with external fuse holder, the fuse may be replaced.As for how to

replace the fuse, refer to the corresponding chapter in the instruction

manual. If no fuse replacement procedures are indicated, the user is not

permitted to replace it. In such case, keep the case closed and consult us

or your local dealer. If the fuse is incorrectly replaced, a fire may occur.

III

USING THE PRODUCT SAFELY

■ Warning item on Grounding

If the product has the GND terminal on the front or rear panel surface, be sure

to ground the product to safely use it.

■ Warnings on Installation environment

● Operating temperature and humidity

Use the product within the operating temperature indicated in the “rating”

temperature column. If the product is used with the vents of the product

blocked or in high ambient temperatures, a fire may occur. Use the product

within the operating humidity indicated in the “rating” humidity column.

Watch out for condensation by a sharp humidity change such as transfer to a

room with a different humidity.Also, do not operate the product with wet

hands. Otherwise, an electric shock or fire may occur.

● Use in gas

Use in and around a place where an inflammable or explosive gas or steam

is generated or stored may result in an explosion and fire. Do not operate the

product in such an environment. Also, use in and around a place where a

corrosive gas is generated or spreading causes a serious damage to the

product. Do not operate the product in such an environment.

● Installation place

Do not insert metal and inflammable materials into the product from its vent

and spill water on it. Otherwise, electric shock or fire may occur.

■ Do not let foreign matter in

Do not insert metal and inflammable materials into the product from its vent

and spill water on it. Otherwise, electric shock or fire may occur.

■ Warning item on abnormality while in use

If smoke or fire is generated from the product while in use, stop using the

product, turn off the switch, and remove the power cord plug from the outlet.

After confirming that no other devices catch fire, ask us or your local dealer.

USING THE PRODUCT SAFELY

■ Input / Output terminals

Maximum input to terminal is specified to prevent the product from being

damaged. Do not supply input, exceeding the specifications that are indicated

in the "Rating" column in the instruction manual of the product. Also, do not

supply power to the output terminals from the outside. Otherwise, a product

failure is caused.

■ Calibration

Although the performance and specifications of the product are checked under

strict quality control during shipment from the factory, they may be deviated

more or less by deterioration of parts due to their aging or others.

It is recommended to periodically calibrate the product so that it is used with its

performance and specifications stable. For consultation about the product

calibration, ask us or your local dealer.

■ Daily Maintenance

When you clean off the dirt of the product covers, panels, and knobs, avoid

solvents such as thinner and benzene. Otherwise, the paint may peel off or

resin surface may be affected. To wipe off the covers, panels, and knobs, use

a soft cloth with neutral detergent in it.

During cleaning, be careful that water, detergents, or other foreign matters do

not get into the product.

If a liquid or metal gets into the product, an electric shock and fire are caused.

During cleaning, remove the power cord plug from the outlet.

Use the product correctly and safely, observing the above warning and caution

items. Because the instruction manual indicates caution items even in

individual items, observe those caution items to correctly use the product.

If you have questions or comments about the manuals, ask us or E-Mail us.

Other manuals for ASR Series

This manual suits for next models

Table of contents

Other TEXIO Portable Generator manuals

TEXIO

TEXIO FGX-2005 User manual

TEXIO

TEXIO ASR Series Owner's manual

TEXIO

TEXIO ASR Series Owner's manual

TEXIO

TEXIO FGX-2005 User manual

TEXIO

TEXIO FGX-2220 User manual

Popular Portable Generator manuals by other brands

Kohler

Kohler 20EORZ Operation

Powerhorse

Powerhorse 83171 owner's manual

HURST

HURST ML-630-SI instruction manual

ETQ

ETQ TG4000 owner's manual

Briggs & Stratton

Briggs & Stratton 40265 Illustrated parts list

ConMed

ConMed 7550 Service manual

Owon

Owon Waveform Generator manual

evertz

evertz 7700 Series manual

Power Stroke

Power Stroke PS906025 Operator's manual

Firefly

Firefly Cygnus CYG2400/460/24 user manual

Draper

Draper PG950S Instructions for

PowerBoss

PowerBoss PowerBoss Operator's manual

SDMO

SDMO SH 4000 Generating set user and maintenance manual

EINHELL

EINHELL STE 5500 operating instructions

Wanco

Wanco WI3000P Operator's manual

Full Boar

Full Boar FBT-3300 instruction manual

Dwyer Instruments

Dwyer Instruments ASG manual

Westinghouse

Westinghouse WH1000i Series owner's manual