Texecom Impaq S User manual
Installation Manual
Impaq S / Impaq SC & Impaq S Grade
3
INS877-4
10-03-2022 • Changed details for sensitivity settings description and tables inline with PCR01407
• PCR01350 updated PCB schematics and wiring details to accommodate PCB changes.
18-10-2022 • Impaq S Grade 3 added to the manual.
INS877-4 3/26
Content
1.0 Introduction 4 ............................................................................................................................
1.1 Impaq S 4 ...............................................................................................................................
1.2 Impaq SC 6 .............................................................................................................................
1.3 Impaq S Grade 3 8 ..................................................................................................................
2.0 Mounting 10 ................................................................................................................................
2.1 Device mounting 10 ...............................................................................................................
2.2 Magnet mounting (type SC only) 13 .......................................................................................
3.0 Impaq S and S Grade 3 wiring configuration 16 ...................................................................
4.0 Impaq SC wiring configuration 20 ...........................................................................................
5.0 LED functionality 22 ..................................................................................................................
6.0 Setting the shock sensitivity 23 ..............................................................................................
7.0 Specifications 24 ........................................................................................................................
8.0 Legal Information 25 .................................................................................................................
INS877-4 4/26
1.0 Introduction
The Impaq S is a Grade 2 wired shock sensor, the Impaq SC is a Grade 2 wired
shock sensor with the option for a magnetic contact, and the Impaq S Grade 3 is a
Grade 3 shock sensor.
Sections 1.1 and 1.2 and 1.3 show the key parts of the devices.
1.1 Impaq S
INS877-4 5/26
INS877-4 6/26
Icon Item
A LED function select DIP switch
B Sensitivity selection button
C Alarm resistance value selection DIP switch
D Tamper resistance value selection DIP switch
E Input terminal block
1.2 Impaq SC
INS877-4 7/26
INS877-4 8/26
Icon Item
A LED function select DIP switch
B Sensitivity selection button
C Magnet sensor
D Alarm resistance value selection DIP switch
E Tamper resistance value selection DIP switch
F Input terminal block
1.3 Impaq S Grade 3
INS877-4 9/26
INS877-4 10/26
Icon Item
ALED function select DIP switch
BSensitivity selection button
CAlarm resistance value selection DIP switch
DTamper resistance value selection DIP switch
EInput terminal block
FRemoval from mounting breakout
2.0 Mounting
2.1 Device mounting
Select the intended mounting position. The device can be installed in any
mounting orientation.
Open the device cover and remove the PCB using a screwdriver (see figure 1)
Remove the cable knockouts (see figure 2)
To ensure product compliance with EN50131, fix the base onto the
mounting surface (see figure 3) using the following screw type:
Head Type: Counter Sunk flat head
Head Diameter: 5.3-6.8mm
Screw Diameter 2.9-3.2mm
Screw length: 15.8-24.5mm
Impaq S Grade 3 MUST use the fixing points shown in RED on Fig 3 for the
removal from mounting tamper to function correctly.
Care should be taken when screwing through the PCB for the rear
tamper breakout. Overtightening the screw could cause the PCB tracks
to break and leave the device permanently in tamper. This is not
reversible and the PCB will need to be replaced.
NOTE 1: If the product is mounted on concrete, suitable wall plugs should be used.
NOTE 2: If installing the Impaq SC the same screw types should be used to mount
Other manuals for Impaq S
1
This manual suits for next models
2
Table of contents
Other Texecom Security Sensor manuals
Texecom
Texecom Premier Elite AM360 QD User manual
Texecom
Texecom Reflex User manual
Texecom
Texecom Premier External TD User manual
Texecom
Texecom AED-0009 User manual
Texecom
Texecom Premier Elite MR Long Range User manual
Texecom
Texecom CAPTURE P15 User manual
Texecom
Texecom Premier Elite Impaq Plus-W User manual
Texecom
Texecom Premier Elite AMQD User manual
Texecom
Texecom Capture A20 User manual
Texecom
Texecom Prestige DT User manual
Texecom
Texecom Premier Elite CO-W User manual
Texecom
Texecom Veritas Medusa User manual
Texecom
Texecom Premier Elite DT-W User manual
Texecom
Texecom CAPTURE D20-W User manual
Texecom
Texecom Mirage DT Petwise User manual
Texecom
Texecom Veritas Reflex INS156-7 User manual
Texecom
Texecom Impaq SC-W User manual
Texecom
Texecom Prestige AMDT Plus User manual
Texecom
Texecom Prestige Orbit QD User manual
Texecom
Texecom Premier External TD-W User manual
