Texas Instruments TMDX654IDKEVM User manual
AM65x/DRA80xM
Industrial Development Kit
Manufactured by Mistral Solutions Pvt. LTD. • www.mistralsolutions.com
Welcome to the AM65x/DRA80xM Industrial Development Kit (IDK) Quick Start Guide. This guide is
designed to help you through the initial setup of the board. This IDK allows you to experience industrial
applications which showcase the AM65x/DRA80xM Quad-Core Cortex®–A53, Dual-Core Cortex-R5F,
gigabit PRU-ICSS (real-time industrial communications subsystem), and more. The IDK contains
the following:
Hardware
• AM6548/DRA804M Quad Core Cortex®-A53
function equivalent processor
• IDK Application card
• 2-lane PCIe SerDes card
• 4GB DDR4 with ECC
• On board 16 GB eMMC
• On board 512Mb OSPI Flash
Printed Documents
• AM65x/DRA80xM IDK Quick Start Guide
(this document)
Miscellaneous
• 1 SD card
• 1 USB 2.0 cable
• 1 Ethernet cable
Not included in box
The following hardware is not included in the box and must be procured separately:
1. Power supply. Use one of the following power supply options for powering up the IDK. Pick a
power supply with all the applicable regional product regulatory/safety certication requirements such
as UL, CSA, VDE, CCC, PSE, etc.
The DIN connector power supply is recommended to provide enough power for applications that make
use of the PCIe interface.
2. 1280 x 800 LCD Display Accessory Kit. The LCD is optional and can be purchased separately
using TI part number TMDSLCD1EVM.
Connector Specifications Examples
Power DIN, 4 Pin +24VDC, 5A Output (Max) CUI Inc. SDI120-24-U-P51
Barrel Plug, 2.5mm I.D. x
5.5mm O.D. x 9.5mm
+24VDC, positive center, 2.71A
Output (Max)
CUI Inc. SDI65-24-UD-P6
1
3
2
4
Optional: If you have purchased the LCD Accessory
Kit, assemble the LCD onto the IDK following the
instructions included with the LCD Accessory Kit.
Connect a power supply (not included) to the DIN
connector or power jack on the IDK and plug it in to
an AC power source. Do not connect both, only one
power supply must be connected.
Insert the SD card into the IDK. Alternatively, download
and install the latest Processor SDK-RTOS from
http://www.ti.com/tool/processor-sdk-am65x, create
a bootable SD card and insert it into the IDK.
Connect the supplied USB debug cable to the USB
connector labeled “UART” on the board. Connect the
other end to your PC. Then open a serial console on
your PC such as Teraterm. Please note that you may
need to download and install an FTDI driver from
http://www.ftdichip.com/FTDrivers.htm.
Default setup (TI-RTOS boot from SD card)
For more information on AM65x processors, including:
•User Guide •Software •How To •Design Files
Please visit www.ti.com/am65x
Important Notice: The products and services of Texas Instruments Incorporated and its subsidiaries described herein are sold subject to TI’s standard terms and conditions of sale. Customers are advised to
obtain the most current and complete information about TI products and services before placing orders. TI assumes no liability for applications assistance, customer’s applications or product designs, software
performance, or infringement of patents. The publication of information regarding any other company’s products or services does not constitute TI’s approval, warranty or endorsement thereof.
Trademarks in this issue: The platform bar and Sitara are trademarks of Texas Instruments. All other trademarks are the property of their respective owners.
© 2018 Texas Instruments Incorporated
Printed in U.S.A.
SPRW324b
Note: This IDK is designed for optional use with a removable
CR2032 UL recognized lithium battery (not supplied). Always
use the CR2032VP Energizer 3V Lithium coin cell battery or
similar CR2032 UL recognized battery with Nominal Voltage
3.0 Volts, Capacity 235mAh
TI Processor SDK software development guides are available at:
Linux: www.ti.com/processor_sdk_linux
TI-RTOS: www.ti.com/processor_sdk_rtos
Android: www.ti.com/processor_sdk_android
7Note that this IDK comes with a coin battery holder.
A coin battery is not necessary for normal operation
of the IDK.
5 6
Optional: If you plan to use Code Composer Studio
(CCS) IDE to control the IDK, you must use another
USB cable connected to the USB connector labeled
“XDS110_USB” on the board. Refer to
http://software-dl.ti.com/processor-sdk-rtos/esd/docs/
latest/rtos/How_to_Guides.html#host for details about
CCS setup.
Turn on the IDK by sliding the toggle switch to the right.
To turn off, slide the toggle switch the left.
IMPORTANT NOTICE AND DISCLAIMER
TI PROVIDES TECHNICAL AND RELIABILITY DATA (INCLUDING DATASHEETS), DESIGN RESOURCES (INCLUDING REFERENCE
DESIGNS), APPLICATION OR OTHER DESIGN ADVICE, WEB TOOLS, SAFETY INFORMATION, AND OTHER RESOURCES “AS IS”
AND WITH ALL FAULTS, AND DISCLAIMS ALL WARRANTIES, EXPRESS AND IMPLIED, INCLUDING WITHOUT LIMITATION ANY
IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NON-INFRINGEMENT OF THIRD
PARTY INTELLECTUAL PROPERTY RIGHTS.
These resources are intended for skilled developers designing with TI products. You are solely responsible for (1) selecting the appropriate
TI products for your application, (2) designing, validating and testing your application, and (3) ensuring your application meets applicable
standards, and any other safety, security, or other requirements. These resources are subject to change without notice. TI grants you
permission to use these resources only for development of an application that uses the TI products described in the resource. Other
reproduction and display of these resources is prohibited. No license is granted to any other TI intellectual property right or to any third
party intellectual property right. TI disclaims responsibility for, and you will fully indemnify TI and its representatives against, any claims,
damages, costs, losses, and liabilities arising out of your use of these resources.
TI’s products are provided subject to TI’s Terms of Sale (www.ti.com/legal/termsofsale.html) or other applicable terms available either on
ti.com or provided in conjunction with such TI products. TI’s provision of these resources does not expand or otherwise alter TI’s applicable
warranties or warranty disclaimers for TI products.
Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265
Copyright © 2019, Texas Instruments Incorporated
This manual suits for next models
10
Table of contents
Other Texas Instruments Microcontroller manuals
Texas Instruments
Texas Instruments SimpleLink CC3200 Wi-Fi Product manual
Texas Instruments
Texas Instruments MSP430F6733 User manual
Texas Instruments
Texas Instruments TMS570LS3137 User manual
Texas Instruments
Texas Instruments SimpleLink CC2650 User manual
Texas Instruments
Texas Instruments MSP430F6747 User manual
Texas Instruments
Texas Instruments DV2031S2 User manual
Texas Instruments
Texas Instruments MSPM0G350 Series User manual
Texas Instruments
Texas Instruments MSPM0G310 Series User manual
Texas Instruments
Texas Instruments MSP430F6721 User manual
Texas Instruments
Texas Instruments Silicon Errata TMS320F28379S User manual
Texas Instruments
Texas Instruments TPS2379 EVM User manual
Texas Instruments
Texas Instruments CC2543EM User manual
Texas Instruments
Texas Instruments Concerto F28M36 Series Product manual
Texas Instruments
Texas Instruments DEV-RF002 User manual
Texas Instruments
Texas Instruments TPS65910 EVM User manual
Texas Instruments
Texas Instruments MSP430F6731A User manual
Texas Instruments
Texas Instruments MSP-WDS Metawatch Series User manual
Texas Instruments
Texas Instruments RM46L852 User manual
Texas Instruments
Texas Instruments CC2652RSIP User manual
Texas Instruments
Texas Instruments MSP430FG6425 User manual
