Texas Instruments INA229 User manual
User’s Guide
INA228, INA229, INA237, INA238, and INA239 EVM User’s
Guide
Mitch Morse
ABSTRACT
This user’s guide describes the characteristics, operation, and use of the INA228, INA229, INA237, INA238, and
INA239 evaluation modules (EVMs). These EVMs are designed to evaluate the performance of the INA228,
INA229, INA237, INA238, and INA239. Throughout this document, the terms evaluation board, evaluation
module, and EVM are synonymous with the INA228EVM, INA229EVM, INA237EVM, INA238EVM, and
INA239EVM. This document includes a schematic, reference printed-circuit board (PCB) layouts, and a
complete bill of materials (BOM).
www.ti.com
SBOU241B – APRIL 2020 – REVISED DECEMBER 2020
Submit Document Feedback
INA228, INA229, INA237, INA238, and INA239 EVM User’s Guide 1
Copyright © 2020 Texas Instruments Incorporated
Table of Contents
1 Trademarks..............................................................................................................................................................................2
2 General Texas Instruments High Voltage Evaluation (TI HV EVM) User Safety Guidelines............................................ 3
3 Overview..................................................................................................................................................................................5
3.1 Kit Contents........................................................................................................................................................................5
3.2 Related Documentation From Texas Instruments.............................................................................................................. 6
4 Hardware................................................................................................................................................................................. 6
4.1 Features............................................................................................................................................................................. 6
5 Operation.................................................................................................................................................................................7
5.1 Quick Start Setup............................................................................................................................................................... 7
5.2 EVM Operation...................................................................................................................................................................7
6 Circuitry................................................................................................................................................................................. 18
6.1 Current Sensing IC...........................................................................................................................................................18
6.2 Input Signal Path..............................................................................................................................................................18
6.3 Digital Circuitry................................................................................................................................................................. 18
7 Schematics, PCB Layout, and Bill of Materials................................................................................................................. 19
7.1 Schematics.......................................................................................................................................................................19
7.2 PCB Layout...................................................................................................................................................................... 23
7.3 Bill of Materials.................................................................................................................................................................25
8 Revision History................................................................................................................................................................... 28
1 Trademarks
All trademarks are the property of their respective owners.
Table of Contents www.ti.com
2INA228, INA229, INA237, INA238, and INA239 EVM User’s Guide SBOU241B – APRIL 2020 – REVISED DECEMBER 2020
Submit Document Feedback
Copyright © 2020 Texas Instruments Incorporated
2 General Texas Instruments High Voltage Evaluation (TI HV EVM) User Safety
Guidelines
WARNING
Always follow TI’s setup and application instructions, including use of all interface components within their
recommended electrical rated voltage and power limits. Always use electrical safety precautions to help ensure
your personal safety and those working around you. Contact TI's Product Information Center http://
support/ti./com for further information.
Save all warnings and instructions for future reference.
WARNING
Failure to follow warnings and instructions may result in personal injury, property damage or death
due to electrical shock and burn hazards.
The term TI HV EVM refers to an electronic device typically provided as an open-framed, unenclosed printed-
circuit board assembly. It is intended strictly for use in development laboratory environments, solely for qualified
professional users having training, expertise, and knowledge of electrical safety risks in development and
application of high-voltage electrical circuits. Any other use and/or application are strictly prohibited by Texas
Instruments. If you are not suitable-qualified, you should immediately stop from further use of the HV EVM.
1. Work Area Safety
a. Keep work area clean and orderly.
b. Qualified observer(s) must be present anytime circuits are energized.
c. Effective barriers and signage must be present in the area where the TI HV EVM and its interface
electronics are energized, indicating operation of accessible high voltages may be present, for the
purpose of protecting inadvertent access.
d. All interface circuits, power supplies, evaluation modules, instruments, meters, scopes and other related
apparatus used in a development environment exceeding 50Vrms/75VDC must be electrically located
within a protected Emergency Power Off EPO protected power strip.
e. Use stable and nonconductive work surface.
f. Use adequately insulated clamps and wires to attach measurement probes and instruments. No freehand
testing whenever possible.
2. Electrical Safety
As a precautionary measure, it is always a good engineering practice to assume that the entire EVM may
have fully accessible and active high voltages.
a. De-energize the TI HV EVM and all its inputs, outputs, and electrical loads before performing any
electrical or other diagnostic measurements. Revalidate that TI HV EVM power has been safely de-
energized.
b. With the EVM confirmed de-energized, proceed with required electrical circuit configurations, wiring,
measurement equipment connection, and other application needs, while still assuming the EVM circuit
and measuring instruments are electrically live.
c. After EVM readiness is complete, energize the EVM as intended.
WARNING
While the EVM is energized, never touch the EVM or its electrical circuits, as they could be at
high voltages capable of causing electrical shock hazard.
www.ti.com General Texas Instruments High Voltage Evaluation (TI HV EVM) User Safety Guidelines
SBOU241B – APRIL 2020 – REVISED DECEMBER 2020
Submit Document Feedback
INA228, INA229, INA237, INA238, and INA239 EVM User’s Guide 3
Copyright © 2020 Texas Instruments Incorporated
3. Personal Safety
a. Wear personal protective equipment (for example, latex gloves or safety glasses with side shields) or
protect the EVM in an adequate lucent plastic box with interlocks to protect from accidental touch.
Limitation for safe use:
EVMs are not to be used as all or part of a production unit.
General Texas Instruments High Voltage Evaluation (TI HV EVM) User Safety Guidelines www.ti.com
4INA228, INA229, INA237, INA238, and INA239 EVM User’s Guide SBOU241B – APRIL 2020 – REVISED DECEMBER 2020
Submit Document Feedback
Copyright © 2020 Texas Instruments Incorporated
3 Overview
The INA228, INA229, INA237, INA238, and INA239 devices are digital power monitors with integrated 20-bit
(INA229 and INA228) and 16-bit (INA237, INA238, and INA239) delta-sigma ADCs specifically designed for
current-sensing applications. The devices can measure a selectable full-scale differential input of ±163.84 mV or
±40.96 mV across the shunt with common-mode voltage support from –0.3 V to +85 V. For the INA228 and
INA229, built-in digital accumulation calculates average power, internal die temperature, energy, and charge
accumulation. For the INA237, INA238, and INA239, built-in digital accumulation calculates average power and
internal die temperature. All devices also have built-in diagnostics to indicate system health accessible through a
digital output pin, ALERT. The devices operate from a single supply of 2.7 V to 5.5 V, drawing < 1.1-mA current
during operation and with < 5-µA current during shutdown. The output can be interfaced with a multitude of
microcontrollers (MCUs) with a standard 4-wire SPI interface (INA229 and INA239) or with a standard I2C
interface (INA228, INA237, and INA238).
Table 3-1. Device Summary
PRODUCT
DIGITAL
PROTOCOL
ADC
RESOLUTION
MAX GAIN
ERROR
MAX OFFSET
VOLTAGE
INA228 I2C 20-bit 0.05% ±1 µV
INA229 SPI 20-bit 0.05% ±1 µV
INA237 I2C 16-bit 0.3% ±50 µV
INA238 I2C 16-bit 0.1% ±5 µV
INA239 SPI 16-bit 0.1% ±5 µV
3.1 Kit Contents
Table 3-2 lists the contents of the EVM kit. Contact the nearest Texas Instruments Product Information Center if
any component is missing.
Table 3-2. Kit Contents
ITEM QUANTITY
INA228EVM, INA229EVM, INA237EVM,
INA238EVM, OR INA239EVM test board
1
Sensor Control Board (SCB) 1
USB cable 1
www.ti.com Overview
SBOU241B – APRIL 2020 – REVISED DECEMBER 2020
Submit Document Feedback
INA228, INA229, INA237, INA238, and INA239 EVM User’s Guide 5
Copyright © 2020 Texas Instruments Incorporated
3.2 Related Documentation From Texas Instruments
This user's guide is available from the TI website under literature number SBOU241. Any letter appended to the
literature number corresponds to the document revision that is current at the time of the writing of this document.
Newer revisions are available from www.ti.com or the Texas Instruments' Literature Response Center at (800)
477-8924 or the Product Information Center at (972) 644-5580. When ordering, identify the document by both
title and literature number. Table 3-3 lists documentation related to the EVM. Click the links in Table 3-3 for
further information. The device name links to the product web folder on www.ti.com. The literature number links
to the document PDF.
Table 3-3. Related Documentation
DOCUMENT TITLE
DOCUMENT LITERATURE
NUMBER
INA228-Q1 data sheet SLYS022
INA229-Q1 data sheet SLYS024
INA237-Q1 data sheet SBOSA27
INA238-Q1 data sheet SLYS026
INA239-Q1 data sheet SLYS028
4 Hardware
The EVM is an easy-to-use platform for evaluating the main features and performance of the INA228, INA229,
INA237, INA238, or INA239. The EVM supports current measurements up to 10 amps, and includes a graphical
user interface (GUI) used to read and write device registers as well as view and save results data.
The EVM is intended to provide basic functional evaluation of the devices. The layout is not intended to be a
model for the target circuit, nor is it laid out for electromagnetic compatibility (EMC) testing. The EVM consists of
two printed-circuit boards (PCBs). The larger PCB is referred to as the EVM, and has either the INA228, INA229,
INA237, INA238, or INA239 installed. The smaller PCB is referred to as the SCB Controller, and is used to
interface the EVM with the GUI.
4.1 Features
• GUI support to read and write device registers as well as view and save results data
• Detachable EVM for custom use cases
• Conveniently powered from a common micro-USB connector
Overview www.ti.com
6INA228, INA229, INA237, INA238, and INA239 EVM User’s Guide SBOU241B – APRIL 2020 – REVISED DECEMBER 2020
Submit Document Feedback
Copyright © 2020 Texas Instruments Incorporated
5 Operation
5.1 Quick Start Setup
The following instructions describe how to set up and use the EVM.
1. Download this driver and install it as an administrator: https://www.ti.com/lit/zip/sbac253.
2. Attach the EVM to the SCB Controller as shown in Figure 5-1.
a. Refer to Figure 5-2 when connecting multiple EVMs of the same type together.
3. Connect the EVM to a PC using the provided USB cable.
a. Insert the micro USB cable into the SCB Controller onboard USB receptacle J2.
b. Plug the other end of the USB cable into a PC.
4. Access the GUI from this link in either Chrome or Firefox: https://dev.ti.com/gallery/info/4910879/
INA228_229_237_238_239EVM_GUI/.
5. Connect the GND reference of the external system to the GND node of the EVM (pin 1 of J1).
6. Provide a differential input voltage signal to the IN+ and IN– nodes by connecting the signal leads to J1 pin 5
or 6 and J1 pin 3 or 4 on the EVM as explained in Section 5.2.2.
5.2 EVM Operation
To use the EVM with the included SCB Controller, connect the EVM as shown in Figure 5-1.
Figure 5-1. EVM Connected to SCB Controller
If using multiple EVMs, connect them as shown in Figure 5-2. Make sure to use a different chip select/address
for each device. The GUI only supports one EVM/device type at a time.
Figure 5-2. Multiple EVMs Connected to SCB Controller
www.ti.com Operation
SBOU241B – APRIL 2020 – REVISED DECEMBER 2020
Submit Document Feedback
INA228, INA229, INA237, INA238, and INA239 EVM User’s Guide 7
Copyright © 2020 Texas Instruments Incorporated
5.2.1 Setup
5.2.1.1 Driver Installation
Download and install this driver: https://www.ti.com/lit/zip/sbac253. This is a one-time step per computer. Unzip
the folder and run the .exe file with administrator privileges.
5.2.1.2 Firmware
The firmware comes preinstalled on the SCB Controller. Firmware updates will be pushed through the GUI
(requires previous driver to be installed). Downloaded offline GUIs will only update the SCB Controller with the
latest firmware available at the time of download. To check for the latest GUI or Firmware updates, launch the
GUI from the web browser.
5.2.1.2.1 Firmware Debug
If the firmware gets corrupted or must be manually reinstalled for any reason, follow these steps to reinstall the
firmware.
1. First, see if the GUI can program the firmware manually.
a. Plug in the SCB controller to the PC
b. Launch the GUI
c. It is possible that the MCU has already entered DFU mode. If so, the GUI may notify you and try to update
the firmware to the latest version.
d. If it does not update automatically, go to File > Program Device...
2. If that does not work (or if the "Program Device" button is grayed out), manually configure the MCU on the
SCB Controller to be in Device Firmware Update (DFU) Mode. This can be done through either of the below
methods with the SCB Controller powered on:
a. Through software:
• Send the command 'bsl' on the SCB's USB Serial (COM) port.
b. Though hardware:
• Short the two test points labeled "DFU" (shown in Figure 5-3) with a pair of tweezers (or wire) while
pressing the RESET button.
Figure 5-3. Test Points Used to Enter DFU Mode Manually
• If the PAMB board is being used instead, these test points are located near PK1 and PK2.
With the MCU in DFU mode, the firmware can now be uploaded through the method outlined in Step 1.
Operation www.ti.com
8INA228, INA229, INA237, INA238, and INA239 EVM User’s Guide SBOU241B – APRIL 2020 – REVISED DECEMBER 2020
Submit Document Feedback
Copyright © 2020 Texas Instruments Incorporated
5.2.1.3 GUI Setup and Usage
The GUI can be accessed from this link in either Chrome or Firefox: https://dev.ti.com/gallery/info/4910879/
INA228_229_237_238_239EVM_GUI/.
5.2.1.3.1 Initial Setup
To set up the GUI the first time:
1. Make sure that the previously mentioned driver was installed successfully to ensure that everything works
properly and that the GUI can update the EVM firmware, if necessary.
2. With the EVM/SCB Controller unit plugged into the PC, go to the previously-provided GUI link.
3. To launch the GUI from the web browser, click the GUI Composer application shown in Figure 5-4.
Figure 5-4. GUI Composer Application
a. For first-time GUI Composer setup, follow the prompts to download the TI Cloud Agent and browser
extension shown in Figure 5-5. These prompts will appear after you close the README.md dialog.
Figure 5-5. TI Cloud Agent
www.ti.com Operation
SBOU241B – APRIL 2020 – REVISED DECEMBER 2020
Submit Document Feedback
INA228, INA229, INA237, INA238, and INA239 EVM User’s Guide 9
Copyright © 2020 Texas Instruments Incorporated
4. Optionally, the GUI can be downloaded for offline use by clicking the icon in the GUI Composer application
(shown in Figure 5-4) and following the prompts.
5.2.1.3.2 GUI Operation
To operate the GUI, follow these steps:
1. Connect to and launch the GUI as described in Section 5.2.1.3.1.
2. With the EVM connected to the GUI, close the README.md file page to initiate the connection. If successful,
"Hardware Connected" should be visible near the bottom left corner of the GUI as in Figure 5-6.
Figure 5-6. Hardware Connected
a. A green indicator with the device type and the text "DEVICE CONNECTED" should also be visible near
the top left of the GUI, as shown in Figure 5-7.
Figure 5-7. Device Connected
b. If "Hardware Connected" and "DEVICE CONNECTED" do not show in the GUI, check different hardware
COM ports under Options >> Serial Port, as shown in Figure 5-8.
Figure 5-8. Change Serial Port
c. If the hardware still does not connect, make sure you are using the correct GUI/EVM combination.
i. If you are using the correct GUI/EVM combination, you may need to reprogram the firmware of the
SCB, as described in Firmware Debug.
3. To view and edit the device register map, click the (registers) icon on the menu on the left.
a. From this page, you can read and write register settings on the EVM. For questions about a register or
register bit field, select the icon. For more questions about registers, check the data sheet.
Operation www.ti.com
10 INA228, INA229, INA237, INA238, and INA239 EVM User’s Guide SBOU241B – APRIL 2020 – REVISED DECEMBER 2020
Submit Document Feedback
Copyright © 2020 Texas Instruments Incorporated
This manual suits for next models
4
Table of contents
Other Texas Instruments Computer Hardware manuals
Texas Instruments
Texas Instruments LMH0318 Manual
Texas Instruments
Texas Instruments TMS320C6457 User manual
Texas Instruments
Texas Instruments AM335 Series Guide
Texas Instruments
Texas Instruments TUSB522P User manual
Texas Instruments
Texas Instruments KCU105 User manual
Texas Instruments
Texas Instruments CC3100BOOST User manual
Texas Instruments
Texas Instruments TMS320F2837 D Series User manual
Texas Instruments
Texas Instruments TLV320AIC3101EVM User manual
Texas Instruments
Texas Instruments LM97937EVM R2 User manual
Texas Instruments
Texas Instruments CC1000PP User manual
Texas Instruments
Texas Instruments TRF0206-SP User manual
Texas Instruments
Texas Instruments Serial Programming Adapter MSP430 User manual
Texas Instruments
Texas Instruments 2000 series User manual
Texas Instruments
Texas Instruments SimpleLink Wi-Fi CC3 20 Series User manual
Texas Instruments
Texas Instruments SimpleLink Wi-Fi BoosterPack CC3120 Manual
Texas Instruments
Texas Instruments TMS320TCI6482 Guide
Texas Instruments
Texas Instruments TPS3801 User manual
Texas Instruments
Texas Instruments TMDXEVM6472 User manual
Texas Instruments
Texas Instruments TAS5066PAG User manual
Texas Instruments
Texas Instruments SimpleLink CC2640 User manual
Popular Computer Hardware manuals by other brands
EMC2
EMC2 VNX Series Hardware Information Guide
Panasonic
Panasonic DV0PM20105 Operation manual
Mitsubishi Electric
Mitsubishi Electric Q81BD-J61BT11 user manual
Gigabyte
Gigabyte B660M DS3H AX DDR4 user manual
Raidon
Raidon iT2300 Quick installation guide
National Instruments
National Instruments PXI-8186 user manual
