TEXA eTRUCK User manual

TEXA eTRUCK
MANUALE TECNICO
TECHNICAL MANUAL
MANUEL TECHNIQUE
TECHNISCHE BEDIENUNGSANLEITUNG
MANUAL TECNICO
MANUAL TECNICO
INSTRUKCJA OBSŁUGI TECHNICZNEJ
ТЕХНИЧЕСКОЕ РУКОВОДСТВО
Rev.01

2

SUMMARY
REVISION OF THE MANUAL..................................................................5
INTRODUCTION......................................................................................6
1 LEGEND OF THE SYMBOLS USED..................................................7
2 GLOSSARY........................................................................................8
3 GENERAL SAFETY REGULATIONS.................................................9
3.1 Glossary.................................................................................................9
3.2 Operator Safety Regulations..................................................................9
3.2.1 General Safety Regulations........................................................................9
3.2.2 Risk of Asphyxiation...................................................................................9
3.2.3 Risk of Impact and Crushing.......................................................................9
3.2.4 Hazards Caused by Moving Parts............................................................10
3.2.5 Risk of Burning or Scalding......................................................................10
3.2.6 Fire and Explosion Hazard.......................................................................11
3.2.7 Noise Hazard............................................................................................11
3.2.8 High Voltage Hazard.................................................................................11
3.2.9 Poisoning Hazard.....................................................................................12
3.3 General User and Maintenance Warnings...........................................12
4 SPECIFIC USER SAFETY RULES FOR TEXA eTRUCK................13
4.1 General Rules......................................................................................13
4.2 User Safety...........................................................................................13
4.3 Vehicle Safety......................................................................................13
4.4 Device Safety.......................................................................................14
5 ENVIRONMENTAL INFORMATION.................................................16
6 OPERATION OF THE RADIO DEVICES..........................................17
7 REGULATORY INFORMATION.......................................................18
8 TEXA eTRUCK.................................................................................19
9 DESCRIPTION..................................................................................20
10 TECHNICAL FEATURES ...............................................................21
11 INSTALLATION AND CONFIGURATION.......................................23
11.1 Preliminary operations........................................................................23
3
en

11.2 Configuration through the App...........................................................23
11.3 Installation in the Vehicle....................................................................24
11.3.1 Installation through 9-pin Deutsch Adapter.............................................24
12 eTRUCK INSTALLATION KIT FOR VOLVO EURO IV-V
(ACCESSORY)......................................................................................26
13 USE.................................................................................................32
14 POWER SUPPLY ..........................................................................32
15 BLINK CODES................................................................................33
16 MAINTENANCE..............................................................................34
17 TROUBLESHOOTING....................................................................35
18 LEGAL NOTICES............................................................................36
4

TEXA ETRUCK TECHNICAL MANUAL
REVISION OF THE MANUAL
This document is revision 01 of the TEXA eTRUCK technical manual.
Issue date: 11/10/2017
5
en

INTRODUCTION
Dear Customer,
We would like to thank you for choosing a TEXA product for your workshop.
We are certain that you will get the greatest satisfaction from it and receive a
great deal of help in your work.
Please read through the instructions in this manual carefully and keep it for
future reference.
Reading and understanding the following manual will help you to avoid damage
or personal injury caused by improper use of the product to which it refers.
TEXA S.p.A reserves the right to make any changes deemed necessary to
improve the manual for any technical or marketing requirement; the company
may do so at any time without prior notice.
This product is intended for use by technicians specialised in the automotive
field only. Reading and understanding the information in this manual cannot
replace adequate specialised training in this field.
The sole purpose of the manual is to illustrate the operation of the product sold.
It is not intended to offer technical training of any kind and technicians will
therefore carry out any interventions under their own responsibility and will be
accountable for any damage or personal injury caused by negligence,
carelessness, or inexperience, regardless of the fact that a TEXA S.p.A. tool
has been used based on the information within this manual.
Any additions to this manual, useful in describing the new versions of the
program and the new functions associated to it, may be sent to you through our
TEXA technical bulletin service.
This manual is to be considered an essential part of the product it refers to. If it
is resold, the original buyer is therefore required to forward the manual to the
new owner.
Reproduction, whole or in part, of this manual in any form without written
authorisation by the manufacturer is strictly forbidden.
The original manual was written in Italian, every other language is a translation
of the original manual.
© copyright and database rights 2018. The material contained in this
document is protected by copyright and database rights. All rights reserved by
Law and under International Conventions.
6

1 LEGEND OF THE SYMBOLS USED
The symbols used in the manual are described in this chapter.
Asphyxiation Risk
Explosion Risk
High Voltage Hazard
Fire / Burn risk
Poisoning Hazard
Corrosive Substances Risk
Noise Hazard
Moving Parts Risk
Crushing Risk
General Risk
Important information
7
en

2 GLOSSARY
This chapter provides the meaning of the technical terms used in the manual:
•Device: any TEXA eTRUCK device.
•WORKSHOP: the workshop that sells and installs TEXA eTRUCK devices.
•FLEET MANAGER: the manager of the vehicle fleet who subscribed the Fleet
Contract in order to use the services associated with TEXA eTRUCK.
•DRIVER: the driver of a vehicle of the fleet.
•Fleet: the group of vehicles managed by the FLEET MANAGER, where TEXA
eTRUCK is installed.
•TEXA eTRUCK FLEET MANAGER WEB Portal: the WEB portal owned by
TEXA through which the FLEET MANAGER can view the data related to the
vehicles of her/his fleet.
•TEXA eTRUCK WORKSHOP WEB Portal: the WEB portal owned by TEXA
through which the WORKSHOP can view the data related to the vehicles of its
customers.
•Coverage list: theofficialdocumentthatindicatesonlythevehiclesonwhichyou
can safely install the device.
•16-pin OBD socket: thediagnosticsocketspecificforEuropeanEURO4,EURO
5,EURO6vehicles,some Americanheavyduty vehiclesandfor lightcommercial
vehicles.
•9-pin Deutsch OBD socket: the diagnostic socket specific for American heavy
duty vehicles.
•Pairing: the mutual recognition process that takes place when two Bluetooth
devices must establish communication for the first time. It could require you to
enter an identification code (PIN).
8

3 GENERAL SAFETY REGULATIONS
3.1 Glossary
•Operator: qualified individual, in charge of using the device / tool.
•Equipment / device / tool: the purchased product.
•Workplace: the place where the operator must carry out her/his work.
3.2 Operator Safety Regulations
3.2.1 General Safety Regulations
•Theoperatormust be completely clear-headed and soberwhenusing the device;
taking drugs or alcohol before or when operating the device is strictly forbidden.
•The operator must not smoke during device operation.
•The operator must carefully read all the information and instructions in the
technical documents provided with the device.
•The operator must follow all the instructions provided in the technical documents.
•The operator must always watch over the device during the various operating
phases.
•The operator must make sure she/he is working in an environment which is
suitable for the operations that must be carried out.
•The operator must report any faults or potentially hazardous situation in
connection with the workplace or the device.
•The operator must carefully follow the safety regulations required for the
workplace in which she/he is working and required by the operations she/he has
been asked to carry out.
3.2.2 Risk of Asphyxiation
Exhaust gases from internal combustion engines, whether petrol or
diesel, are hazardous to your health and can cause serious harm to
your body.
Safety Precautions:
•Theworkplacemustbeequippedwithanappropriateventilationandairextraction
system and must be in compliance with standards according to current national
laws.
•Always activate the air extraction system when working in closed environments.
3.2.3 Risk of Impact and Crushing
The vehicles which are undergoing A/C system recharging operations
and the devices must be properly blocked using the specific
mechanical brakes/blocks while being serviced.
9
en

Safety Precautions:
•Always make sure that the vehicle is in neutral gear (or that it is set in parking
position in case of a vehicle equipped with automatic transmission).
•Always activate the hand brake or parking brake on the vehicle.
•Always block the wheels on the vehicle with the specific mechanical blocks.
•Make sure the device is stable, on a flat surface and that the wheels are locked
with the specific mechanical blocks.
3.2.4 Hazards Caused by Moving Parts
Vehicle engines include parts that move, both while running and not
running (e.g.: the cooling fan is controlled by a thermal switch in
connection with the coolant temperature and can be activated even
when the vehicle is off), that can injure the operator.
Safety Precautions:
•Keep hands away from moving parts.
•Disconnect the engine cooling fan each time the engine you are working on is
still hot. This will avoid the fan from becoming activated unexpectedly even when
the engine is off.
•Do not wear ties, loose clothes, wrist jewellery or watches when working on a
vehicle.
•Keep connection cables, probes and similar devices away from the moving parts
of the engine.
3.2.5 Risk of Burning or Scalding
The parts that are exposed to high temperatures in engines that are
moving or have just stopped could burn the operator.
Remember that catalytic mufflers reach very high temperatures, able
to cause serious burns or even start fires.
Acid in the vehicle batteries is another potential hazard.
Safety Precautions:
•Protect your face, hands, and feet by using suitable protection.
•Avoid contact with hot surfaces, such as spark plugs, exhaust pipes, radiators
and connections within the cooling system.
•Make sure there are no oil stains, rags, paper or other inflammable material near
the muffler.
•Avoid splashing electrolyte onto your skin, eyes and clothes, as it is a corrosive
and highly toxic compound.
10
Table of contents

















