TI2000-308 3kW Inverter System
2
1.3 – Hazards
WARNING Shock Hazard Potential
Severe injury or death from electrical shock will occur if either the user or the TI2000-308 3 kW Inverter
System is wet while operating the unit. Be sure to disconnect power from the AC Output Cable if the
TI2000-308 3 kW Inverter System has come into contact with water. If the AC Output Circuit Breaker
has tripped due to water inltration, DO NOT try to reset circuit breaker until Inverter System has dried
completely.
WARNING Shock Hazard Potential
Severe injury or death from electrical shock can occur when damp electrical plugs are connected to the
TI2000-308 3 kW Inverter System. Make sure the electrical outlet is switched off before making any
connections. Failure to use proper grounding can cause potential shock hazard!
CAUTION Unit Damage Potential
The unit will be damaged if unapproved dc power is applied. This Unit operates from 20-30 Vdc @ 250
Amps Max.
CAUTION Unit Damage Potential
Turn off dc input power before connecting or disconnecting dc input power. Failure to turn off dc power
could cause voltage spikes that can permanently damage the Unit.
1.4 – Important Safety Precautions
WARNING Fire/Explosion Hazard Potential
Severe injury or death from re or explosion can occur if electrical sparks are produced near fuel vapors.
DO NOT CONNECT ac output power from Inverter System while operating or handling any type of fuel.
1.5 – Extreme Environments
CAUTION Unit Damage Potential
The TI2000-308 3 kW Inverter System is equipped with a temperature sensor that automatically disables
Inverter functions when the internal temperature reaches above 150°F (65°C). This protects the unit
from overheating and damage. If the unit shuts down, move the unit into a cooler climate such as shade
or air conditioning when possible.
1
Safety Review
