1 Product Description
Congratulations on your choice of the UPS uninterruptible power system (UPS), the UPS
comes in nominal power ratings of 6-20kVA. It is designed to provide conditioned power to
computers and other sensitive electronic equipment.
This chapter gives a brief description of the UPS, including the UPS features, models,
appearance, operating principle and specification.
1.1 Electromagnetic Compatibility
*Safety
IEC/EN 62040-1-1
*EMI
Conducted Emission ......... lEC/EN 62040-2 Category C3
Radiated Emission ............ lEC/EN 62040-2 Category C3
*EMS
ESD .................................. IEC/EN 61000-4-2 Level4
RS .................................... IEC/EN 61000-4-3 Level3
EFT .................................. IEC/EN 61000-4-4 Level4
SURGE ............................ IEC/EN 61000-4-5 Level4
Low Frequency Signals
.............. :IEC/EN 61000-2-2
Warning: This is a product for commercial and industrial application in the second
environment-installation restrictions or additional measures may be needed to prevent
disturbances.
NOTICE:
This is a product for restricted sales distribution to informed partners. Installation restrictions
or additional measures may be needed to prevent radio interference.
Operated the UPS in an indoor enviroment only in an ambient temperature range of
0-40°C(32-104°F). Install it in a clean environment, free from moisture, flammable liquids,
gases and corrosive substance.
This UPS contains no user-serviceable parts except the internal battery pack. The UPS
" �" push buttons do not electrically isolate internal parts. Under no circumstance attempt
to gain access internally, due to the risk of electric shock or burn.
Do not continue to use the UPS if the panel indications are not in accordance with these
operating instructions or the UPS performance alters in use. Refer all faults to your dealer.
Servicing of batteries should be performed or supervised by personnel knowledgeable of
batteries and the precautions. Keep unauthorized personnel away from the batteries. Proper
disposal of batteries is required. Refer to your local laws and regulations for disposal
requirement.
DO NOT CONNECT equipment that could overload the UPS or demand surge current from
the UPS, for example: electric drills, vacuum cleaners, hair dryer, motors and so on.
DO NOT CONNECT equipment that is life related, for example: medical equipment, elevator
2
USER MANUAL TEOS 200E PRO 10-20kVA
