Teradek VidiU User manual
pantone 1795 pantone 355 pantone 307
VIDIU AND VIDIU PRO
REFERENCE GUIDE
© 2017 Teradek, LLC. All Rights Reserved.
Page 2
1. Introduction ................................................................................ 3
Support Resources ............................................................... 3
Disclaimer ................................................................................. 3
Warning ...................................................................................... 3
Physical Properties .............................................................. 4
2. Getting Started ......................................................................... 6
Power Your Device ................................................................ 6
Connect to a Network .......................................................... 7
Choose a Platform .............................................................. 10
Internet Streaming from VidiU with Live:Air .......... 11
3. Settings Overview ……….……………………..……………….............. 12
Settings Diagrams .............................................................. 13
Broadcast: Platform Settings ........................................ 16
Broadcast: Quality Settings ........................................... 21
Video/Audio ........................................................................... 22
System ………….……………………………………………........................... 23
Network .................................................................................... 24
Wired ……………………....................................................... 24
Wireless …….…............................................................. 24
USB 3G/4G Modem ................................................. 25
Mobile …………................................................................ 25
Recording …………………….…...…………………………........................ 26
Sharelink ……………………….…………………………….......................... 26
4. Troubleshooting ..................................................................... 27
5. Technical Specifications .................................................. 29
Table of Contents
Page 3© Teradek, LLC 2017. All rights reserved.
Thank you for purchasing Teradek’s VidiU, the ultimate entry-level streaming solution for HDMI video sources. This
reference guide is for both VidiU and VidiU Pro encoders; save where otherwise noted, operations are identical. VidiU and
VidiU Pro deliver high definition live streaming video with the quality and reliability expected in traditional HD broadcast.
VidiU features native integration with some of the most popular video platforms, offering a seamless streaming experience.
Use this reference guide to enhance your usage and knowledge of VidiU or VidiU Pro.
Support Resources
In addition to this reference guide, there are a number of resources available for more information on the VidiU’s features
and operation. For tips, information, and all the latest available firmware and software updates, visit Teradek’s support
forum at https://support.teradek.com. If you are unable to find what you are looking for online, please contact Teradek’s
Disclaimer
This manual is intended for user information only. Every effort has been made to ensure that the contents within are
accurate at the time of printing, and that updates are made in a timely manner. Teradek cannot be held responsible for
inaccuracies, typographical errors, or out-of-date information contained within this manual.
Warning
Teradek VidiU products contain no user serviceable parts. Disassembly, modification, or removal of any of the device’s
components may void your warranty. Please visit http://store.teradek.com/pages/warranty-information for up-to-date
warranty terms and conditions.
Page 4
Physical Properties (VidiU)
H
A. Power Switch (Side)
B. USB Port (Side)
C. Headphone Output (Side)
D. Video Input Status
E. Encoder Status
F. Broadcast Status
G. Warning Indicator
H. Start/Stop Joystick
I. Menu Joystick
J. HDMI Input
K. Mic/Line Input
L. Reset Button
M. Ethernet
N. Power Input
D
A
JK L
N
M
B
C
E
F
G
I
Page 5© Teradek, LLC 2017. All rights reserved.
Physical Properties (VidiU Pro)
F
A. SD Card Slot (side)
B. Video Input Status
C. Encoder Status
D. Broadcast Status
E. Warning Indicator
F. Start/Stop
G. USB Port (side)
H. Menu Joystick
I. HDMI Input
J. MIC/Line Input
K. Headphone Output
L. Reset Button
M. Ethernet
N. DC Input
O. Power Switch
H
C
B
E
D
A
IJK L
M
O
N
G
Page 6
POWER YOUR DEVICE
1. To power your VidiU or VidiU Pro, connect the AC adapter
to the DC input (Fig. 2-1) located on the back of the
device, then turn the power switch to the On position.
VidiU begins to boot as soon as the power is activated.
2. Turn on your video source, then connect it to VidiU
using the HDMI input, also located on the back of the
device (Fig. 2-2).
3. Use the enclosed hot shoe mount and a 1/4”-20 screw to
mount the VidiU to your camera, tripod mount, or other
accessory mount, if desired.
Use the Start/Stop and Menu Joysticks (Fig. 2-4) to navigate
the Front Panel Interface.
Start/Stop:
●(button press): Start/Stop broadcasts, exit menu screens
Menu:
, ●(button press): Confirm selection, open selected menu
▲,▼, , : Select menu items, change status screen
on main display, select characters.
▼
▼
▼
Fig. 2-1
Fig.3
Fig. 2-2
Fig. 2-3
4. Once the VidiU has booted, verify that the Video Input
Status and Encoder (H.264) LEDs are blue (Fig. 2-3).
This indicates a video source has been successfully
detected and the encoder is running.
Fig. 2-4
Start/Stop and Menu Joysticks
GETTING STARTED
1. Power your device
2. Connect VidiU to a network
3. Choose your streaming platform
There are three key steps to going live with VidiU:
Page 7© Teradek, LLC 2017. All rights reserved.
The VidiU iOS application allows you to remotely monitor and configure
VidiU. Download the VidiU iOS app from the App Store, then choose one
of the following methods to get VidiU online.
Using the VidiU App
Connect VidiU to a Wi-Fi Network:
1. Connect your iOS device to VidiU’s Access Point
network, then select the VidiU.
2. Navigate to the Settings menu, select Network, then
select Wireless.
3. Select Client Mode, then tap Scan for Networks
(Fig. 2-7).
4. Select a network, then connect your iOS device to that
network.
Fig. 2-7
Connect VidiU to an Ethernet Network:
1. Plug an Ethernet cable into VidiU’s Ethernet port
(Fig. 2-5) and attach it to an Internet−connected
Ethernet switch or router.
2. Connect your iOS device to VidiU’s Access Point network
(pg. 24): VidiU−XXXXX (serial number of the device).
3. Open the app and select VidiU, then verify that the
connection status shows Online (Fig. 2-6). Fig. 2-5 Fig. 2-6
You can use the VidiU app, the Web User Interface (Web UI), or the front panel interface to connect VidiU to a network.
Select one of the following options.
CONNECT TO A NETWORK
Page 8
Connect to a Wired Network:
1. Plug an Ethernet cable into VidiU’s Ethernet port
(Fig. 2-9) and attach it to an Internet−connected
Ethernet switch or router.
2. Once the device is connected to the network, VidiU’s
front panel interface will indicate that it’s ‘Ready.’
3. Using the Menu Joystick, navigate to the Network menu,
then select Wired.
4. Once the device is configured and connected to the
network, VidiU’s IP address is displayed.
To access the Web UI:
5. Open a web browser and enter VidiU’s IP address in the
navigation bar (Fig. 2-12).
Fig. 2-9
Connect using your phone’s data plan:
1. Connect your iOS device to VidiU’s Access Point network (pg. 24):
VidiU−XXXXX (serial number of the device).
2. Open the VidiU app and select VidiU with the corresponding serial
number under the list of Wi-Fi devices.
3. When prompted, click Yes to use your cellular data plan
(Fig. 2-8).
Fig. 2-8
Using the Front Panel Interface
Page 9© Teradek, LLC 2017. All rights reserved.
Connect to a Wi-Fi Network:
1. Using the Menu Joystick, navigate to the Network menu,
then select WiFi.
2. Activate Client Mode, then select Scan for Networks.
Select a Wi-Fi Network, then enter your credentials.
3. Once the device is configured, select[INFO to view the
IP address (Fig. 2-10).
To access the Web UI:
4. Open a web browser and enter VidiU’s IP address in the
navigation bar (Fig. 2-12).
Fig. 2-10
Connect using a 3G/4G USB Modem:
1. Insert a compatible 3G/4G USB modem into the
USB port (Fig. 2-11) and wait for the cellular reception
icon (4 bars) to appear.
2. To confirm the modem is connected, navigate to the
Network Settings menu and select USB Modem.*
To access the Web UI:
3. Connect your computer to VidiU’s AP network.
4. Open a web browser and enter VidiU’s IP address
in the navigation bar (Fig. 2-12).
Fig. 2-7
Fig. 2-11
Fig. 2-12
Page 10
CHOOSE YOUR PLATFORM
VidiU and VidiU Pro are capable of broadcasting to any compatible online video platform. VidiU offers integration with
many popular video streaming platforms, simply enter your credentials using the VidiU app, Web UI, or the front panel
interface.
Connect to a Streaming Platform:
1. Go to Settings, select Broadcast (Fig. 2-13) then
select Platform (Fig. 2-14).
2. Select a streaming platform (Fig. 2-15) and enter your
credentials, or follow the on-screen prompts to
authorize VidiU with YouTube or Facebook.
(For more detailed set up instructions, go to the Platform
Settings section on pg.16.)
3. Select a channel or event to stream to.
4. After configuring your device, you will be redirected
to the Settings menu. Select Done on the upper right
corner.
5. Tap the ‘Broadcast’ button to go live (Fig. 2-16).
Fig. 2-13 Fig. 2-14
Fig. 2-15 Fig. 2-16
Broadcast button:
VidiU is ready to broadcast
Broadcast is in session
VidiU is not ready to broadcast
Other manuals for VidiU
2
This manual suits for next models
1
Table of contents
