Tennant 8200D User manual
8200D
*3300*0*
www.tennantco.com
Operator Manual
330080
Rev. 08 (3-2006)
This manual is furnished with each new model. It provides
necessary operation and maintenance instructions.
Read this manual completely and understand the ma-
chine before operating or servicing it.
This machine will provide excellent service. However, the
best results will be obtained at minimum costs if:
SThe machine is operated with reasonable care.
SThe machine is maintained regularly - per the ma-
chine maintenance instructions provided.
SThe machine is maintained with manufacturer sup-
plied or equivalent parts.
PROTECT THE ENVIRONMENT
Please dispose of packaging materials,
old machine components such as
batteries, hazardous fluids such as
antifreeze and oil, in a safe
environmentally way according to your
local waste disposal regulations.
Always remember to recycle.
MACHINE DATA
Please fill out at time of installation for future reference.
Model No.- 8200D
Serial No.-
Machine Options --
Sales Rep. --
Sales Rep. phone no. --
Customer Number --
Installation Date --
Tennant Company
PO Box 1452
Minneapolis, MN 55440
Phone: (800) 553--8033 or (763) 523--2850
CALIFORNIA PROPOSITION 65 WARNING:
Engine exhaust from this product contains chemicals known to the State of California to cause cancer,
birth defects, or other reproductive harm.
MAXPRO and ES are United States registered trademarks of the Tennant Company
Thermo Sentry is a United States trademark of Tennant Company.
Specifications and parts are subject to change without notice.
Copyright E1998--2000, 2002--2006 TENNANT, Printed in U.S.A.
CONTENTS
1
8200D 330080 (6--04)
CONTENTS
Page
SAFETY PRECAUTIONS 3...................
OPERATION 7..............................
OPERATOR RESPONSIBILITY 7........
MACHINE COMPONENTS 8............
SYMBOL DEFINITIONS 9...............
CONTROLS AND INSTRUMENTS 11.....
OPERATION OF CONTROLS 12.........
DIRECTIONAL PEDAL 12.............
BRAKE PEDAL 13...................
PARKING BRAKE PEDAL 13..........
IGNITION SWITCH 14................
STEERING WHEEL 14...............
STEERING COLUMN TILT LEVER
(OPTION) 14.....................
MAIN SWEEP BRUSH DOWN
PRESSURE KNOB 15.............
SIDE BRUSH LEVER 16..............
SIDE BRUSH DOWN PRESSURE
HANDLE 16......................
HOPPER LEVER 16..................
HOPPER DOOR LEVER 17...........
CONTROL PANEL 17.................
HOURMETER 17....................
FUEL LEVEL GAUGE 17..............
SCRUB SWITCH 18..................
SQUEEGEE SWITCH 19..............
EDGE SCRUB SWITCH (OPTION) 19..
ES SWITCH (OPTION) 20.............
RECOVERY TANK FULL INDICATOR 20
DETERGENT PUMP SWITCH
(OPTION) 21.....................
ENGINE SPEED SWITCH 21..........
SWEEPING VACUUM FAN SWITCH 22
FILTER SHAKER SWITCH 22.........
OPERATING LIGHTS SWITCH 23.....
OPERATING/HAZARD LIGHT
SWITCH (OPTION) 23.............
SOLUTION FLOW SWITCH 23........
MANUAL FLOW VALVE 24............
CHARGING SYSTEM LIGHT 25.......
ENGINE OIL PRESSURE LIGHT 25....
ENGINE WATER TEMPERATURE
LIGHT 25.........................
HOPPER TEMPERATURE LIGHT --
THERMO SENTRY 26.............
OK LIGHT 26........................
CLOGGED FILTER LIGHT (OPTION) 26
HOPPER DOOR CLOSED LIGHT
(OPTION) 27.....................
HYDRAULIC FILTER BYPASS LIGHT
(OPTION) 27.....................
HORN BUTTON 27...................
CIRCUIT BREAKERS 28..............
FUSE 28..............................
Page
OPERATOR SEAT 29.................
ADJUSTABLE SEAT (OPTION) 29
.....
DELUXE SUSPENSION SEAT
(OPTION) 29.....................
HOPPER SUPPORT BAR 31..........
ENGINE COVER GAS SPRING 31.....
LATCHES 31........................
HOW THE MACHINE WORKS 32.........
PRE-OPERATION CHECKLIST 33........
STARTING THE MACHINE 34............
SWEEPING, SCRUBBING, AND
BRUSH INFORMATION 36............
SWEEPING 38...........................
STOP SWEEPING 39...................
EMPTYING THE HOPPER 40............
FILLING THE TANKS 42.................
SCRUBBING 44........................
DOUBLE SCRUBBING 46................
STOP SCRUBBING 46..................
DRAINING AND CLEANING THE TANKS 47
STOP THE MACHINE 50................
POST-OPERATION CHECKLIST 51.......
ENGAGING HOPPER SUPPORT BAR 52.
DISENGAGING HOPPER SUPPORT
BAR 54...............................
OPERATION ON INCLINES 55...........
TIE DOWNS 55.........................
MACHINE TROUBLESHOOTING 56......
MAINTENANCE 58........................
MAINTENANCE CHART 58..............
LUBRICATION 60.......................
ENGINE 60..........................
REAR WHEEL SUPPORT 60..........
FRONT WHEEL BEARINGS 61........
HOPPER LIFT ARM PIVOTS 61.......
SCRUB HEAD DRAG LINK ARMS 61...
HYDRAULICS 62.......................
HYDRAULIC FLUID RESERVOIR 62...
HYDRAULIC FLUID 63...............
HYDRAULIC HOSES 64..............
PROPELLING MOTOR 64.............
ENGINE 65............................
COOLING SYSTEM 65...............
AIR FILTER INDICATOR (OPTIONAL) 65
AIR FILTER 66.......................
FUEL FILTER 67.....................
BATTERY 67........................
BELTS AND CHAINS 68.................
ENGINE BELT 68....................
ACCESSORY PUMP BELT 68.........
STATIC DRAG CHAIN 69.............
DEBRIS HOPPER 70....................
HOPPER DUST FILTER 70............
REMOVING HOPPER DUST FILTER 71
THERMO SENTRY 71................
CONTENTS
8200D 330080 (6--04)
2
Page
SCRUB HEAD 72.......................
BRUSHES 72...........................
MAIN SWEEP BRUSH 72.............
REPLACING MAIN SWEEP
BRUSH 73.....................
CHECKING AND ADJUSTING
MAIN SWEEP BRUSH
PATTERN 75................
SIDE BRUSH 77.....................
REPLACING SIDE BRUSH 78......
SCRUB BRUSHES 79................
REPLACING THE SCRUB
BRUSHES 80..................
SOLUTION SYSTEM 80.................
RECOVERY TANK 80................
SOLUTION TANK 81.................
SQUEEGEES 81........................
REAR SQUEEGEE 81................
LEVELING THE REAR SQUEEGEE 82
ADJUSTING REAR SQUEEGEE
BLADE DEFLECTION 83........
SIDE SQUEEGEES 84...............
ADJUSTING THE SIDE
SQUEEGEES 84...............
SQUEEGEE BLADES 84................
REAR SQUEEGEE 84................
REPLACING OR ROTATING REAR
SQUEEGEE BLADES 84........
SIDE SQUEEGEES 85...............
REPLACING SIDE SQUEEGEE
BLADES 85....................
SKIRTS AND SEALS 86.................
REAR SKIRTS 86....................
BRUSH DOOR SEALS 86.............
HOPPER LIP SKIRTS 86..............
HOPPER SEALS 87..................
HOPPER DOOR SEALS 87...........
HOPPER FILTER SEALS 87...........
HOPPER VACUUM FAN SEAL 88......
TANK COVER SEALS 88.............
BRAKES AND TIRES 89.................
SERVICE BRAKES 89................
PARKING BRAKE 89.................
TIRES 89...........................
REAR WHEEL 89....................
PUSHING, TOWING, AND
TRANSPORTING THE MACHINE 90...
PUSHING OR TOWING THE
MACHINE 90.....................
TRANSPORTING THE MACHINE 91......
MACHINE JACKING 93..................
STORING MACHINE 93.................
Page
SPECIFICATIONS 94......................
GENERAL MACHINE PERFORMANCE 94.
POWER TYPE 95.......................
STEERING 95..........................
HYDRAULIC SYSTEM 95................
BRAKING SYSTEM 95..................
TIRES 95..............................
MACHINE DIMENSIONS 96..............
INDEX 97..............................
SAFETY PRECAUTIONS
3
8200D 330080 (9--05)
SAFETY PRECAUTIONS
The following precautions are used throughout
this manual as indicated in their description:
WARNING: To warn of hazards or
unsafe practices that could result in
severe personal injury or death.
FOR SAFETY: To identify actions that
must be followed for safe operation of
equipment.
The machine is suited to sweep disposable
debris. Do not use the machine other than
described in this Operator Manual. The machine
is not designed for use on public roads.
The following information signals potentially
dangerous conditions to the operator or
equipment:
WARNING: Engine emits toxic gases.
Severe respiratory damage or
asphyxiation can result. Provide
adequate ventilation. Consult with your
regulatory authorities for exposure
limits. Keep engine properly tuned.
WARNING: Raised hopper may fall.
Engage hopper support bar.
WARNING: Lift arm pinch point. Stay
clear of hopper lift arms.
WARNING: Moving belt and fan. Keep
away.
WARNING: Flammable materials can
cause an explosion or fire. Do not use
flammable materials in tank(s).
WARNING: Flammable materials or
reactive metals can cause explosion or
fire. Do not pick up.
FOR SAFETY:
1. Do not operate machine:
-- Unless trained and authorized.
-- Unless operator manual is read and
understood.
-- If it is not in proper operating
condition.
-- In flammable or explosive areas unless
designed for use in those areas.
-- In areas with possible falling objects
unless equipped with overhead guard.
2. Before starting machine:
-- Check for fuel, oil, and liquid leaks.
-- Keep sparks and open flame away
from refueling area.
-- Make sure all safety devices are in
place and operate properly.
-- Check brakes and steering for proper
operation.
3. When starting machine:
-- Keep foot on brake and directional
pedal in neutral.
4. When using machine:
-- Use brakes to stop machine.
-- Go slow on inclines and slippery
surfaces.
-- Use care when reversing machine.
-- Move machine with care when hopper
is raised.
-- Make sure adequate clearance is
available before raising hopper.
-- Do not carry passengers on machine.
-- Always follow safety and traffic rules.
-- Report machine damage or faulty
operation immediately.
-- Follow mixing and handling
instructions on chemical containers.
5. Before leaving or servicing machine:
-- Stop on level surface.
-- Set parking brake.
-- Turn off machine and remove key.
SAFETY PRECAUTIONS
8200D 330080 (6--03)
4
6. When servicing machine:
-- Avoid moving parts. Do not wear loose
jackets, shirts, or sleeves.
-- Block machine tires before jacking
machine up.
-- Jack machine up at designated
locations only. Block machine up with
jack stands.
-- Use hoist or jack that will support the
weight of the machine.
-- Wear eye and ear protection when
using pressurized air or water.
-- Disconnect battery connections before
working on machine.
-- Avoid contact with battery acid.
-- Avoid contact with hot engine coolant.
-- Allow engine to cool.
-- Keep flames and sparks away from
fuel system service area. Keep area
well ventilated.
-- Use cardboard to locate leaking
hydraulic fluid under pressure.
-- Use Tennant supplied or approved
replacement parts.
7. When loading/unloading machine
onto/off truck or trailer:
-- Turn off machine.
-- Use truck or trailer that will support
the weight of the machine.
-- Use winch. Do not drive the machine
onto/off the truck or trailer unless the
load height is 380 mm (15 in) or less
from the ground.
-- Set parking brake after machine is
loaded.
-- Block machine tires.
-- Tie machine down to truck or trailer.
SAFETY PRECAUTIONS
5
8200D 330080 (3--06)
The following safety labels are mounted on the
machine in the locations indicated. If these or any
label becomes damaged or illegible, install a new
label in its place.
ENGINE FAN AND BELT LABEL -- LOCATED
ON THE RADIATOR SHROUD.
EMISSIONS LABEL -- LOCATED ON THE SIDE
PANEL OF THE OPERATOR COMPARTMENT.
FLAMMABLE SPILLS LABEL -- LOCATED
ON THE SIDE PANEL OF THE OPERATOR
COMPARTMENT.
351550
SAFETY PRECAUTIONS
8200D 330080 (1--98)
6
HOPPER LIFT ARMS LABEL -- LOCATED
ON BOTH HOPPER LIFT ARMS.
FLAMMABLE MATERIALS LABEL -- LOCATED
ON THE SOLUTION TANK COVER & ON THE
BATTERY TRAY ON MACHINES WITH THE
DETERGENT TANK OPTION.
FOR SAFETY LABEL -- LOCATED ON THE
SIDE PANEL OF THE OPERATOR
COMPARTMENT.
HOPPER SUPPORT BAR LABEL -- LOCATED
ON THE HOPPER SUPPORT BAR AND ON
BOTH HOPPER LIFT ARMS. 351550
OPERATION
7
8200D 330080 (1--98)
OPERATION
OPERATOR RESPONSIBILITY
-The operator’s responsibility is to take care
of the daily maintenance and checkups of
the machine to keep it in good working
condition. The operator must inform the
service mechanic or supervisor when the
required maintenance intervals occur as
stated in the MAINTENANCE section of this
manual.
-Read this manual carefully before operating
this machine.
FOR SAFETY: Do not operate machine,
unless operation manual is read and
understood.
-Check the machine for shipping damage.
Check to make sure machine is complete
per shipping instructions.
-Keep your machine regularly maintained by
following the maintenance information in this
manual. We recommend taking advantage
of a regularly scheduled service contract
from your Tennant representative.
-Order parts and supplies directly from your
authorized Tennant representative. Use the
parts manual provided when ordering parts.
-After the first 50 hours of operation, follow
the recommended procedures stated in the
MAINTENANCE CHART.
07324
OPERATION
8200D 330080 (1--98)
8
MACHINE COMPONENTS
A
B
C
D
E
F
H
JI
K
L
M
N
O
P
Q
G
351550
A. Control panel
B. Steering wheel
C. Operator seat
D. Engine cover
E. Engine side door
F. Rear squeegee
G. Side squeegee
H. Sweeping brush access door
I. Hopper cover
J. Hopper dust filter
K. Solution tank
L. Recovery tank
M. Main sweeping brush
N. Side brush
O. Scrub brushes
P. Detergent tank (option)
Q. Scrub head
Table of contents
Other Tennant Floor Machine manuals
Tennant
Tennant 92 GR User manual
Tennant
Tennant 96GR User manual
Tennant
Tennant 355 User manual
Tennant
Tennant 2370 User manual
Tennant
Tennant 800 User manual
Tennant
Tennant 9000498 Training manual
Tennant
Tennant F6 User manual
Tennant
Tennant 385D User manual
Tennant
Tennant F14 Product manual
Tennant
Tennant 1530 Product manual
Tennant
Tennant S30 User manual
Tennant
Tennant 355D User manual
Tennant
Tennant 1240 User manual
Tennant
Tennant T7 User manual
Tennant
Tennant EX-SC-1530 User manual
Tennant
Tennant 1510 Product manual
Tennant
Tennant 2000 Product manual
Tennant
Tennant M20 Training manual
Tennant
Tennant 6200LP User manual
Tennant
Tennant 2370 Product manual
