Tennant S30 Training manual
IB 9008211 (10--2010) 1
INSTRUCTION BULLETIN
No. 9008211
Machine: S30/S30 XP/
S30 X4
Published: 10--2010
Rev. 00
NOTE: DO NOT DISCARD the Parts List from the Instruction Bulletin. Place the
Parts List in the appropriate place in the machine manual for future
reference. Retaining the Parts List will make it easier to reorder
individual parts and will save the cost of ordering an entire kit.
NOTE: Numbers in parenthesis ( ) are reference numbers for parts listed in Bill of Materials.
Installation instructions for kit number 9008200
SYNOPSIS:
This kit contains the parts needed to install an overhead guard kit on S30, S30 XP, and S30 X4
machines (serial numbers 002100 and above).
Please follow step-by-step instructions.
SPECIAL TOOLS / CONSIDERATIONS: NONE
(Estimated time to complete: 1 hour)
PREPARATION:
1. Park the machine on a clean level surface,
turn off the machine, remove the key, and set
the parking brake.
FOR SAFETY: Before leaving or servicing
machine, stop on level surface, turn off
machine, and remove key.
2. Open the right rear cover.
INSTALLATION:
NOTE: It is recommended that two persons install
this kit, due to it being necessary for two persons
to lift the assembled overhead guard onto the
machine and one person to hold parts while the
other installs the assembly/mounting hardware.
NOTE: Do not completely tighten assembly/
mounting hardware until instructed to do so at the
end of this Instruction Bulletin. All hardware is
tightened after the overhead guard is completely
installed onto the machine.
1. Use four hex screws (6), eight flat washers
(8), and four lock nuts (9) to install the right
guard leg (3) onto the overhead guard top (1).
Refer to Fig. 1.
1
3
68
9
8
FIG. 1
IB 9008211 (10--2010)2
2. Use a hex screw (6), two flat washers (8),
and a lock nut (9) to install the mirror
bracket (4) and left guard leg (2) onto the
overhead guard top (1). Refer to Fig. 2.
1
2
5
4
8
6
9
8
FIG. 2
3. Use three hex screws (6), six flat washers (8),
and three lock nuts (9) to install the rest of the
rear of left guard leg (2) onto the overhead
guard top (1). Refer to Fig. 2.
4. Use the hardware included with the mirror (5)
to install the mirror onto the mirror bracket (4).
Refer to Fig. 2.
5. Use existing hardware already installed on
machine to install the front leg of the right
guard leg (3) to the machine. Refer to Fig. 3
and Fig. 7.
FIG. 3
6. Use existing hardware already installed on the
machinetoinstallthefrontlegoftheleft
guard leg (2) to the machine. Refer to Fig. 4
and Fig. 7.
FIG. 4
7. Use a hex screw (7), one flat washer (8), and
a lock nut (9) to install the rear leg of the left
guard leg (2) to the machine. Refer to Fig.5
and Fig. 7.
7
FIG. 5
8. Use two hex screws (7) to install the rear leg of
the right guard leg (3) to the machine. Refer to
Fig. 6 and Fig. 7.
7
FIG. 6
9. Tighten all loose hardware.
IB 9008211 (10--2010) 3
7
8
6
1
2
3
5
4
68
8
89
8
9
9
9
8
7
8
6
Existing
hardware
Existing
hardware
FIG. 7
IB 9008211 (10--2010)4
Bill of Materials for OHG Kit, CI [S30] -- 9008200
Ref.
Tennant
Part No. Description Qty.
o9008200 )OHGKit,Ci[S30] 1
Y1 1032262 Guard Wldt, Ohg, Top 1
Y2 1032067 Leg Wldt, Guard, Lh 1
Y3 1061016 Leg Wldt, Guard, Rh [Roto--Covers] 1
Y4 1032722 Bracket, Mtg, Mirror 1
Y549034 )Mirror, Convex, 06.7 X 06.2 1
Y6 39283 Screw, Hex, M10 X 1.5 X 25, 8.8 8
Y7 1037358 Screw, Hex, M10 X 1.5 X 35, Sems 6
Y8 32492 Washer, Flat, 0.38, Std 17
Y9 41430 Nut, Hex, Lock, M10 X 1.5, Nl 9
Y10 1045101 )Bracket, Sppt, Ohg 1
TENNANT COMPANY
P. O. Box 1452
Minneapolis, MN 55440-1452
Other manuals for S30
7
This manual suits for next models
2
Other Tennant Blower manuals
Tennant
Tennant S30 User manual
Tennant
Tennant 6200 Training manual
Tennant
Tennant SweepSmart S20 ELECTRIC User manual
Tennant
Tennant 6600 User manual
Tennant
Tennant SweepSmart S20 ELECTRIC User manual
Tennant
Tennant 6550 User manual
Tennant
Tennant S880 User manual
Tennant
Tennant S12 User manual
Tennant
Tennant 1069645 Product manual
Tennant
Tennant 3620 User manual
Tennant
Tennant S20 Gas User manual
Tennant
Tennant S5 NA Product manual
Tennant
Tennant S7 User manual
Tennant
Tennant 340429 Training manual
Tennant
Tennant A60 User manual
Tennant
Tennant 6100 Training manual
Tennant
Tennant SweepSmart S20 ELECTRIC Operating and installation instructions
Tennant
Tennant 800 User manual
Tennant
Tennant S10 Operating and installation instructions
Tennant
Tennant S6 User manual
