Tenmars TM-6001 User manual
TM-6001
Battery Impedance Tester
User’s Manual
HB2TM6001M00
Contents:
1 Features............................................................1
2 Accessories.......................................................1
3 Safety Precaution..............................................2
4 Meter Description..............................................4
5 General specifications.......................................8
6 Electrical specifications: ....................................9
7 Operation:.......................................................12
7.1 Clock setup................................................15
7.2 Comparator Settings ..................................15
7.3 DC Current (DCA) measurement................20
7.4 Temperature measurement(K-TYPE).........21
7.5 DATA HOLD and Back light function..........22
7.6 Auto Hold and Auto Recording function......22
7.7 Manual data logging mode and Clear data
logger memory...........................................22
7.8 Fuse replacement ......................................23
7.9 Auto power off setup ..................................24
8. Battery Replacement.......................................25
9. External DC Power..........................................25
10. Software installation........................................26
11. End of Life Disposal ........................................29
TM-6001
1
1 Features
1. The Battery Tester is designed for measuring the
internal impedance and open circuit voltage of the
secondary battery including Nickel-metal hydride
battery ( NiMH),Nickel-cadmium
battery(NiCd),Lithium-ion battery(Li-ion), Alkaline
battery and lead-Acid battery.
2. AC four-terminal method to measure the internal
impedance by eliminating lead impedance and
contact impedance to get the accurate results.
3. Multi-display to show the internal impedance, voltage
and clock of the battery simultaneously.
4. It has 99 sets of composite comparator function,
which can be set at impedance and voltage values
to get the reliable detection of battery
deterioration.
5. Pin type leads, which can easily contact the battery
electrodes supplied as standard to get more
accurate 4-terminal measurement.
2 Accessories
.
1
Meter
1 User’s Manual
1 Kevin Clip type leads with temperature sensor
1 Pin type leads
1 AC100~240V 9V/1A switching transformer
6
1.5 V
–
LR6
–
AA
–
AM3
–
MN 1500.
1 Carrying Case
1
USB cable
1 Installation CD
TM-6001
2
3 Safety Precaution
CAUTION
Take extreme care for the following
conditions while measuring.
1. Measuring voltage over 20V as it may cause
human body electricity conduction.
2. Do not measure voltage, current under humid or
wet environment. If any unusual condition of test
leads’ send
3. (Metal part). And attachment of the meter, such as
breakage, deformation, fracture, foreign
substance, No display, etc., do not conduct any
measuring.
4. Do not contact any exposed metal (conductive)
parts, such as end of test lead, jack, fixing object,
circuit etc,.
5. Keep you insulated from the object waiting for
measuring.
6. Do not operate the meter under the environment
with explosive gas
7. (material), combustible gas (material) steam or
filled with dust.
8. In order to avoid reading incorrect data, you have
to replace the batteries immediately when the
symbol BAT appears on the LCD.
9. In order to avoid the damage caused by contamination
and static electricity, do not touch the circuit board before
you take any adequate action.
TM-6001
3
Symbols Description
Caution
Danger high Voltage：risk of electric shock
Meter Double insulated
AC Voltage or Current
AC Voltage or Current
:
Ground
FUSE
TM-6001
4
4 Meter Description
TM-6001
5
FIG (1)
1. LCD display..
2. key ：Comparator function.
3. key ：To delete single data logged reading in
the memory and settings date/time.
4. key ：To show the data logged readings..
5. key ：For recording the displayed values.
6. key ：Select the impedance range. (4mΩ,
40mΩ,400mΩ, 4Ω, 40Ω,400Ω)
TM-6001
6
7. key ：Select the voltage range. (6V, 60V).
8. key ：Hold or disable -hold function for the
displayed values.
9. key ：Power ON/OFF.
10. key ：Turn the beeper on or off
11. key ：For implementing the zero-adjust feature.
12. key ：Select the auto-hold and auto-memory
feature.
13. key ：For configuration settings to increase
values.
14. key ：For configuration settings to decrease
values.
15. key ：For configuration settings to left changing
digit.
16. key ：For configuration settings to right
changing digit.
17. key ：To set the configuration with entering
values.
18. SOURCE＋input jack：For connecting with the red test
TM-6001
7
lead plug.
19. SOURCE－input jack：For connecting with the back
test lead plug.
20. SENSE＋input jack：For connecting with the yellow test
lead plug.
21. SENSE－input jack：For connecting with the blue test
lead plug.
22. TEMPSENSOR input jack：For connecting the plug of
the temperature sensor.
23. DCA＋input jack：For connecting with the red test lead
plug to current probe.
24. DCA－input jack：For connecting with the back test
lead plug to current probe.
25. K-TYPE＋input jack：For connecting the external T10
adapter and K-type＋probe.
26. K-TYPE- input jack：For connecting the external T10
adapter and K-type – probe.
27. Ratings and type of fuse：0.5A/250V 5ψ×20mm FAST
MIN INTERRUPT RATINGS.1500A.
28. USB interface：Used for connecting the USB cable.
29. DC input jack：Used for connecting the external power
DC 9V input.
TM-6001
8
5 General specifications
Measuring method：Impedance (AC four-terminal
method).
A/D conversion: Dual slope method.
Display：LCD display and LEDs (comparator output).
Sampling rate:2 Second.
Open-Circuit terminal voltage: 7.0Vp-p max.
Input over range: the screen displays “OL”.
Low battery detection: the screen displays “ ”.
Auto power off: The meter will turn off automatically
after about 15 minutes of inactivity, allows user to set
the inactive time (01〜99 minutes).
Comparator settings: High and Low limits of the
comparators impedance and voltage.
Number of comparator settings: 99 sets.
Manual and auto continuous Data logging: 9999 sets.
Operating temperature and R.H. value: 5°C to 40°C,
80%RH or less (non- condensation).
Storage temperature and R.H. value: -10°C to 60°C,
70%RH or less (non-condensation).
Operating ambience: In-door use, under
environmental pollution grades two.
Operating attitude: Max 2000 meters above level.
Power supply: 1.5V × 6 NEDA 15F IEC R6 JIS
SUM-3(ALKALINE).
AC adapter：AC input Voltage is 100Vac to 240Vac
1.0A with input frequency of 60 HZ or 50HZ,Free
Voltage DC output is 9VDC(8~11VDCMax) Supply
current：＞1.0ADC. Socket：pin Ground Casing
Positive External Diameter 5.5mm internal Diameter
2.1mm.
Dimension and weight: 240mm(L) x 170mm (W) x
66mm(H). approximate 1500g(including batteries).
Table of contents
Other Tenmars Test Equipment manuals
