Tenex dvr530 User manual
Mini Portable MPEG-4 DVR
User Manual
Security Instruction
B
efore using this product, please carefully read the instructions it will let
you enjoy various features of the product
Keep your battery charged,
If Battery is low recording audio and video or transfer files may cause
system errors, resulting in loss of data!
Don't not tamper with unit!
Otherwise there will be an electric shock hazard!
Touch-
DC converter components May lead to
electric shock
In order to prevent the use of DC converter operation when questions,
please read the [Manual]
Note:
Avoid the use of this product contact with water or other liquids, or else there
will be an electric shock or fire danger! Your safety, please use the Product to provide
power converters (for the use of non-provided converter damage caused by products,
manufacturers takes no responsibility for), please note I would like to use with the
converter in line with the socket, otherwise there will be an electric shock or fire
danger to DC converter plug is firmly inserted into a power outlet.
Security Instruction
Do not use a damaged battery or charger
Do not al low batterycharging time exceeds the allotted time
At fi rst the use of batteri es or battery unused i n a few months after the re-use, please fully
charge the battery.
for the battery i s f ull y charged, the use of i ts ful l y di scharged, then re-charge in order to
ensure its longer life,
At short-term use after the battery will shorten battery life, in this case, repeatedly for the
battery is fully charged and then fully discharged several times, so you can use the battery a
longer period of time
Overcharging or excessive discharge will shorten the life of rechargeable batteries
When t he r echargeabl e bat ter y l i f e t han t he use of a new rechargeabl e bat t er y shor t ti me,
replace the new rechargeable batteries.
because of r echargeabl e bat ter i es ar e consumables, so battery life will be shortened over time.
Careful not to let any conductor (such as necklaces, bracelets, etc.) to enable access to DC
converter or a rechargeable battery side short-circuit, or may cause electric shock or fire
Product features
Multiple record mode: Motion detect record/manual record
Storage full over writes automatically
Fast video recording by one key function
Recording, power ON/OFF via remote control
Real time Display/Recording at 30fps with date and time stamp
960 * 240 high-definition 2.5/2.7-inch LCD screen
Support 32GB TF memory card
Video resolution: 800*600/640 * 480/320 * 240 optional
Video frames 10-30 frames / second optional
High-speed USB2.0 interface.
Audio and video input / output;
Configuration removable high-capacity lithium battery, 5 hours of continuous playback,
video recording up to 2 hours standby
Parts Introduction
1. Power Switch 8. Loudspeakers
2. Record button 9. Video / audio input
3. Select Key 10. Charging Indicator
4. Select Key 11. Recording Indicator LED
5. ESC button 12. Video / audio output
6. Enter button 13. USB port
7. TF card slot 14. Mode switching key
Remote controller Introduction
1. Power ON 3. Key ring
2. Power OFF 4
．
LED Indicator
User Guide
Hold the Power On/Off button for 3 Seconds to turn On/Off the Device.
Interface Diagram:
Mode selection
●Video Record - Video Recording Mode
●Audio recording – Audio recording mode
●playback - Player for / Video / Audio/ Photo Mode
●System Setting - System Settings
The use of model selection
■Video Record Mode --
■At the main menu select [video Record] icon to enter the video mode
1. Into the (video Record) mode. Screen appears to the camera collected images,
2. By [OK] button to enter the [Record Settings], then [Menu] key to exit. (Note: this function should
not operate simultaneously at the next video). This feature please refer to[Record Settings] Operational
Guidelines.
3. According to [●] key to record the audio and video camera images, In the recording studio when the
left pulse of flashing lights.
Press ESC button to quit recording.
Quit recording after recording the file will be automatically stored in the (playback -video) file folder.
Man-in memory, the recording will automatically stop and automatically stored in the (playback- video)
file folder.
Mode Selection
■Audio Recording mode - Select [ Audio Record ] Icon in the Main Menu
Operational Guidelines:
. The main menu to enter the (Audio recording) mode appears when the screen interface to record instructions.
By recording [●] button to record the local microphone to receive all the audio. In the recording studio
when the left pulse of flashing lights.
Press [ESC] key to stop recording.
Quit recording after recording the file will be automatically stored in the (playback- audio) file folder.
Man-in memory, the recording will automatically stop and automatically stored in the (playback- audio)
file folder.
Mode Selection
■Playback Mode - Select [ Playback] Icon in the Main Menu
Instruction:
1. Once inside [Playback], you will be able to see a list of recorder file. Using the select the require
Table of contents
Other Tenex DVR manuals
