4
•Wear appropriate protective clothing.
•Operators of this equipment should be adequately trained in the handling of hot and cold items and
liquids.
•Do not use the apparatus for jobs other than those for which it was designed, i.e. the calibration of
thermometers.
•Do not handle the apparatus when it is hot (or cold), unless wearing the appropriate protective
clothing and having the necessary training.
•Do not drill, modify or otherwise change the shape of the apparatus.
•Do not use the apparatus outside its recommended temperature range.
•If cased, do not return the apparatus to its carrying case until the unit has cooled.
•There are no user serviceable parts inside. Contact Tempsens agent for repair.
•Ensure materials, especially flammable materials are kept away from hot parts of the apparatus, to
prevent fire risk.
•Do not use the Product around explosive gas, vapor, or in damp or wet environments.
•Make sure that the space around the Product meets minimum requirements.
•Do not keep the Product in operation and unattended at high temperatures.
•Do not set anything on top of the Product. Very high temperatures can cause the ignition of
flammable materials.
•BURN HAZARD - DO NOT touch the well access surface of the unit.
•DO NOT turn off the unit at temperatures higher than 100°C. This could create a hazardous situation.
Select a set-point less than 100°C and allow the unit to cool before turning it off.
•Materials used in this furnace may be irritating to skin, eyes, and respiratory tract. Consult the
material manufacturer’s MSDS (Material Safety Data Sheet).
•HIGH VOLTAGE is used in the operation of this equipment. SEVERE INJURY OR DEATH may
result if personnel fail to observe safety precautions.
•The top sheet metal of the furnace may exhibit extreme temperatures for areas close to the well
access.
CAUTIONS
To avoid possible damage to the instrument, follow these guidelines.
•Before working inside the equipment, turn the power off and disconnect the power cord.
•Overhead clearance is required. DO NOT place this instrument under a cabinet or other
structure.
•DO NOT turn the unit upside down with the inserts in place; the inserts will fall out of the unit.
•Use of this instrument at HIGH TEMPERATURES for extended periods of time requires
