Telex Audiocom SS-1002 Manual

SS1002 / SS2002 Supplemental Information 1

9330-7627-000 Rev B 05/2005

Audiocom®

SS1002 / SS2002 Supplemental Information

Installing the Box to the Faceplate

General Instructions

If you ordered SS1002/ SS2002 boxes and faceplates separately, use

these instructions to assemble the speaker stations. Once you have

assembled the stations, refer to the User Manual for all installation and

operation information.

Step 1: Connecting the Wires from the Box to the Faceplate

Use the appropriate pin connections, below, to connect the wires from the XLR audio connector on the box to

the terminal strip on the circuit board. (Or in the case of the “U” box, connect wires from the intercom system to

the terminal strip.) To insert a wire into the terminal strip, push back the green lever on the top of the terminal as

shown, then insert the wire and release the lever.

XLR Connector

on Box

Terminal Strip on

Circuit Board

Description

Pin 1 TB1-1 DC Common

Pin 2 TB1-3 Audiocom Channel audio low and +24VDC phan-

tom power

Pin 3 TB1-4 Audiocom Channel audio high and +24VDC

phantom power

Table 1: SS1002 wire connections for use in Audiocom System

XLR Connector

on Box

Terminal Strip on

Circuit Board

Description

Pin 1 TB1-1 Common

Pin 2 TB1-3 Clear-com power input

Pin 3 TB1-4 Clear-com audio / call signal

Table 2: SS1002 wire connections for use in Clear-com System

2SS1002 / SS2002 Supplemental Information

*When connected as shown, Clear-com Line A corresponds to SS2002 Ch 1 and Clear-com Line B corresponds to

SS2002 Ch 2.

Step 2: Assemble the Faceplate to the Box

Use the four screws supplied with the faceplate.

Step 3: Install the Intercom Station

Refer to the User Instructions for further information.

XLR Connector on

Box

Terminal Strip on

Circuit Board

Description

Pin 1 TB1-1 Common

Pin 2 No connection

Pin 3 TB1-3 Audiocom Channel 1 audio low and +24VDC

phantom power

Pin 4 TB1-4 Audiocom Channel 1 audio high and +24VDC

phantom power

Pin 5 TB1-5 Audiocom Channel 2 audio low and +24VDC

phantom power

Pin 6 TB1-6 Audiocom Channel 2 audio high and +24VDC

phantom power

Table 3: SS2002 wire connections for use in Audiocom System

XLR Connector on

Box

Terminal Strip on

Circuit Board

Description

Pin 1 TB1-1 Common

Pin 2 TB1-3 Clear-com power input

Pin 3 TB1-6 Clear-com Line B*

Pin 4 TB1-4 Clear-com Line A*

Pin 5 No Connection

Pin 6 No Connection

Table 4: SS2000 wire connections for use in Clear-com System

This manual suits for next models

1

Table of contents

Other Telex Intercom System manuals

Popular Intercom System manuals by other brands

Bticino

Bticino LINEA 3000 Installation

MSI

MSI MSI-140 owner's manual

golmar

golmar Stadio Plus instruction manual

CyberData

CyberData 011211 series Installation quick reference

Vidos

Vidos duo M1021 user manual

Vimar

Vimar ELVOX 7539/E Installation and operation manual

SSS Siedle

SSS Siedle BTSV 850-03 operating instructions

Dahua

Dahua VTO Series quick start guide

Elvox

Elvox 5651 Wiring instructions

Videx

Videx VIDEOKIT Series owner's manual

Rocom

Rocom Doortello Business FW T2.05W2.04 user guide

Viking

Viking E-35-EWP product manual

Safeguard Supply

Safeguard Supply LRA-EX1000 user manual

SSS Siedle

SSS Siedle BFCV 850 Series operating instructions

GRD

GRD MAX V2 user manual

Alecto

Alecto ADI-250 user manual

Aiphone

Aiphone IE-8MD Installation & operation manual

Perel

Perel EDB4 user manual