Teleview TSP104 User manual
TSP104
STREAM GENERATOR/
8VSB/QAM-B/OFDM/ISDB-T CAPTURE
USER’S MANUAL
www.teleview.com
Table of Contents
1.Overview…..…………………………………………………… 1
2. System Contents…….……………………………………….. 1
3. Basic Requirement………………………………………….. 2
4. Hardware Installation……..……………………………….. 2
5. Driver Installation….……………………………………….. 3
6. Application Software Installation………………………… 5
7. Operating……………………………………………………… 7
TSP104 User Manual -------------------------------
Revision on January, 2009Page1
1. Overview
This document explains how to install one of TSP104 board on
a Windows XP/2000 based PC system and how to use the control
program “TPG0104.EXE”
2. System Contents
You should have the followingitems.
Items Quantity
-------------------------------------------------------------------------------
TSP104 PCI Board 1
Bracket Assembly(RF out) 1
Installation CD 1
User Manual 1
(TSP104 PCI Board)
------------------------------------------------------------------------------------------
(Bracket Assembly)
---------------------------------------------------------------------------------------
TSP104 User Manual -------------------------------
Revision on January, 2009Page2
3. Basic Requirement
System requirements for TSP104 board are as follows
-Pentium PC with Microsoft Windows XP/2000 Professional (Service Pack 2 or
higher) installed
-TSP104 Card and cables
-Installation CD of TSP104
(It is available from http://www.teleview.com/download)
4. Hardware Installation
1. Before installing, touchthe grounded part of PC to protect the board from
static electricity.
2. Turn off the computer.
3. Remove the power cord from the PC.
4. Open the case
5. Assemble bracket and cables
6. Insert TSP104 board into PCI slots
7. Fixing bracket for RF output into blank slot
8. Fasten the screw on the brackets using a screwdriver.
9. Close the case and Turn on the computer
5. Driver Installation(on XP)
1. When you start up a system after TSP104 hardware installation, TSP104 is
recognized by Windows system, and the following message will appear. Select
Install from a list …and click Next.
TSP104 User Manual -------------------------------
Revision on January, 2009Page3
2. SelectSearch for the best…and type or browse “D:\Driver”(Assume that D: is CD-
ROM driver), click Next.
3. Click Continue Anyway.
TSP104 User Manual -------------------------------
Revision on January, 2009Page4
4.After couple of seconds, you will see this message.Click Finish.
TSP104 User Manual -------------------------------
Revision on January, 2009Page5
6. Application Software Installation
1. Execute “D:\Install\Setup.exe”by double clicking it. ClickOK.
2. Click the Next button to proceed.
3. Click the Next button to proceed. Click the Browser button to change the
destination folder.
TSP104 User Manual -------------------------------
Revision on January, 2009Page6
4. Click the Next to proceed.
5. Installation is done.
TSP104 User Manual -------------------------------
Revision on January, 2009Page7
7. Operating
TPG0###.EXE is a GUI control program. If one wants to use console-based application,
refer the SDK’s HLD/LLD demo source.
PLAYING FILES
Select a file to play. ( )
Start playback. (, , )
TS stream will be output through DVB-ASI and SMPTE-310M output port with the
specified playrate.
(Tips)
-The default transport stream directory can be changed
by using (Need mouse).
-The information about bitrate and packet size of the selected stream file will be
displayed below FILE LIST. The bitrate value will be updated at PLAY RATEif
STOP state.
TSP104 User Manual -------------------------------
Revision on January, 2009Page8
-If there are no files at PLAY LIST, the current selected stream file at FILE LIST
will be played.
-One can add stream files at PLAY LIST with ,or remove stream files
from PLAY LIST with ,
If there are stream files atPLAY LIST, the streamfiles will be played one by one.
-After selectingPLAY RATE with button, one can change the play rate using
numeric keys or rotating key( ). PLAY RATE will be changed in unit of 1000
-PGM SIZE indicates total running time of the selected stream file.
-FREE shows remained hard disk capacity.
One can control TPG0###.EXE program with front-panel keypad, mouse and/or
keyboard.
Click “OPTION”to changeplay/demodulator relatedoptions. “OPTION”is
found at the bottom menu. Refer the picture at CONTROL MULTI-BOARD
CONFIGURATION.
If “PCR,…,RESTAMP”is checked, the time stamp in TS stream (PCR, PTS,
DTS, ESCR) is recalculated from the 2nd loop in LOOP MODE. (New time
stamp will be original time stamp plus calculated value based on the bitrate and
the transferred bytes)
Table of contents
Popular PCI Card manuals by other brands
Conrad Electronic
Conrad Electronic 97 46 71 operating instructions
Micro Innovations
Micro Innovations USB650A Quick installation guide
KTI Networks
KTI Networks KF-310 user guide
Asus
Asus SpaceLink WL230 user manual
SIIG
SIIG SC2475 Quick installation guide
TRENDnet
TRENDnet TEW-703PI Quick installation guide
