Teledyne T700 User manual

Operation Manual

Model T700

Dynamic Dilution Calibrator

Also supports operation of

Model T700U

(when used in conjunction with T700U addendum, PN 06876)

(TAPI) 9970 CARROLL CANYON ROAD

SAN DIEGO, CA 92131-1106

USA

Toll-free Phone:

800-324-5190

Phone: +1 858657-9800

Fax: +1 858657-9816

Email:

api-sales@teledyne.com

Website:

http://www.teledyne-api.com/

06873E DCN7106

Teledyne Advanced Pollution Instrumentation

10 June 2015

NOTICE OF COPYRIGHT

TRADEMARKS

All trademarks, registered trademarks, brand names or product names appearing in this document are the

property of their respective owners and are used herein for identification purposes only.

06873E DCN7106

Teledyne API –Model T700 Dynamic Dilution Calibrator

This page intentionally left blank.

06873E DCN7106

iii

IMPORTANT SAFETY INFORMATION

Important safety messages are provided throughout this manual for the purpose of avoiding personal injury or

instrument damage. Please read these messages carefully. Each safety message is associated with a safety

alert symbol, and are placed throughout this manual and inside the instrument. The symbols with messages are

defined as follows:

WARNING: Electrical Shock Hazard

HAZARD: Strong oxidizer

GENERAL WARNING/CAUTION: Read the accompanying message for

specific information.

CAUTION: Hot Surface Warning

Do Not Touch: Touching some parts of the instrument without

protection or proper tools could result in damage to the part(s) and/or the

instrument.

Technician Symbol: All operations marked with this symbol are to be

performed by qualified maintenance personnel only.

Electrical Ground: This symbol inside the instrument marks the central

safety grounding point for the instrument.

CAUTION

This instrument should only be used for the purpose and in the

manner described in this manual. If you use this instrument in a

manner other than that for which it was intended, unpredictable

behavior could ensue with possible hazardous consequences.

NEVER use any gas analyzer to sample combustible gas(es)!

Note

For Technical Assistance regarding the use and maintenance of this

instrument or any other Teledyne API product, please contact Teledyne

API’s Technical Support Department:

Telephone: 800-324-5190 Email: sda_techsupport@teledyne.com

or by accessing various service options on our website:

http://www.teledyne-api.com/.

06873E DCN7106

Teledyne API –Model T700 Dynamic Dilution Calibrator

CONSIGNES DE SÉCURITÉ

Des consignes de sécurité importantes sont fournies tout au long du présent manuel dans le but d‟éviter des

blessures corporelles ou d‟endommager les instruments. Veuillez lire attentivement ces consignes. Chaque

consigne de sécurité est représentée par un pictogramme d‟alerte de sécurité; ces pictogrammes se retrouvent

dans ce manuel et à l‟intérieur des instruments. Les symboles correspondent aux consignes suivantes :

AVERTISSEMENT : Risque de choc électrique

DANGER : Oxydant puissant

AVERTISSEMENT GÉNÉRAL / MISE EN GARDE : Lire la consigne

complémentaire pour des renseignements spécifiques

MISE EN GARDE : Surface chaude

Ne pas toucher : Toucher à certaines parties de l‟instrument sans protection ou

sans les outils appropriés pourrait entraîner des dommages aux pièces ou à

l‟instrument.

Pictogramme « technicien » : Toutes les opérations portant ce symbole doivent

être effectuées uniquement par du personnel de maintenance qualifié.

Mise à la terre : Ce symbole à l‟intérieur de l‟instrument détermine le point central

de la mise à la terre sécuritaire de l‟instrument.

MISE EN GARDE

Cet instrument doit être utilisé aux fins décrites et de la manière décrite dans

ce manuel. Si vous utilisez cet instrument d’une autre manière que celle pour

laquelle il a été prévu, l’instrument pourrait se comporter de façon imprévisible

et entraîner des conséquences dangereuses.

NE JAMAIS utiliser un analyseur de gaz pour échantillonner des gaz

combustibles!

06873E DCN7106

WARRANTY

WARRANTY POLICY (02024G)

Teledyne Advanced Pollution Instrumentation (TAPI), a business unit of Teledyne

Instruments, Inc., provides that:

Prior to shipment, TAPI equipment is thoroughly inspected and tested. Should equipment

failure occur, TAPI assures its customers that prompt service and support will be available.

COVERAGE After the warranty period and throughout the equipment lifetime, TAPI stands ready to

provide on-site or in-plant service at reasonable rates similar to those of other manufacturers

in the industry. All maintenance and the first level of field troubleshooting are to be

performed by the customer.

NON-TAPI MANUFACTURED EQUIPMENT

Equipment provided but not manufactured by TAPI is warranted and will be repaired to the

extent and according to the current terms and conditions of the respective equipment

manufacturer‟s warranty.

PRODUCT RETURN All units or components returned to Teledyne API should be properly packed for

handling and returned freight prepaid to the nearest designated Service Center. After the

repair, the equipment will be returned, freight prepaid.

The complete Terms and Conditions of Sale can be reviewed at http://www.teledyne-

api.com/terms_and_conditions.asp

CAUTION –Avoid Warranty Invalidation

Failure to comply with proper anti-Electro-Static Discharge (ESD) handling and

packing instructions and Return Merchandise Authorization (RMA) procedures

when returning parts for repair or calibration may void your warranty. For anti-ESD

handling and packing instructions please refer to the manual, Fundamentals of

ESD, PN 04786, in its “Packing Components for Return to Teledyne API‟s

Customer Service” section. The manual can be downloaded from our website at

http://www.teledyne-api.com under Help Center > Product Manuals in the Special

Manuals section; RMA procedures are under Help Center > Return Authorization.

06873E DCN7106

Teledyne API –Model T700 Dynamic Dilution Calibrator

This page intentionally left blank.

06873E DCN7106

vii

ABOUT THIS MANUAL

Presented here is information regarding the documents that are included with this

manual (Structure) and how the content is organized (Organization).

STRUCTURE

This T700 manual, PN 06873, is comprised of multiple documents, assembled in PDF

format, as listed below.

Part No.

Rev

Name/Description

06873

Operation Manual, T700 Dynamic Dilution Calibrator

05623

Appendix A, Menu Trees and related software documentation

06852

Spare Parts List (in Appendix B of this manual)

05625

Appendix C, Repair Form

069140100

Interconnect List (in Appendix D of this manual)

Appendix D, Schematics:

06914

Interconnect Diagram

04420

SCH, PCA 04120, UV DETECTOR

04422

SCH, PCA 04144, DC HEATER/TEMP SENSOR

04421

SCH, PCA 04166, UV LAMP POWER SUPPLY

04354

SCH, PCA 04003, Pressure/Flow Transducer Interface

04524

SCH, PCA 04523, RELAY CARD

05698

SCH, PCA 05697 ADPTR, EXT VALVE DRIVER

05803

SCH, PCA 05802, MOTHERBOARD, GEN-5

06698

SCH, PCA 06670, INTRFC, LCD TCH SCRN,

06882

SCH, LVDS TRANSMITTER BOARD

06731

SCH, AUX-I/O BOARD

Note

We recommend that this manual be read in its entirety before any attempt is

made to operate the instrument.

06873E DCN7106

Teledyne API –Model T700 Dynamic Dilution Calibrator

viii

This page intentionally left blank.

06873E DCN7106

Other manuals for T700

Table of contents

Other Teledyne Test Equipment manuals

Teledyne

Teledyne LeCroy T3DSO2000A Series User manual

Teledyne

Teledyne Everywhereyoulook T3DSOH1000 User manual

Teledyne

Teledyne LeCroy Waverunner LT Series Instruction sheet

Teledyne

Teledyne HDO9000 User manual

Teledyne

Teledyne T3DSO1000 Operating instructions

Teledyne

Teledyne T3DSO3000 User manual

Teledyne

Teledyne 401 User manual

Teledyne

Teledyne waverunner xi-a series Parts list manual

Teledyne

Teledyne T3DSO1000 User manual

Teledyne

Teledyne CP030A User manual

Teledyne

Teledyne PXP-100B User manual

Teledyne

Teledyne T703 User manual

Teledyne

Teledyne GT Series Quick start guide

Teledyne

Teledyne HDO8000A User manual

Teledyne

Teledyne LabMaster 10 Zi Series User manual

Teledyne

Teledyne T700 User manual

Teledyne

Teledyne HDO6000B User manual

Teledyne

Teledyne HDO4000 User manual

Teledyne

Teledyne 804A User manual

Teledyne

Teledyne LabMaster 10 Zi Series Parts list manual

Teledyne

Teledyne Reson PDS Specification sheet

Teledyne

Teledyne T3DAQ1-16 User manual

Teledyne

Teledyne T3DSO2000 User manual

Teledyne

Teledyne T3HVD User manual

Popular Test Equipment manuals by other brands

SMART

SMART KANAAD SBT XTREME 3G Series user manual

Agilent Technologies

Agilent Technologies BERT Serial Getting started

Agilent Technologies

Agilent Technologies N3280A user guide

Vernier

Vernier Go Direct Voltage manual

Lifeloc

Lifeloc R.A.D.A.R. quick start guide

Fluke

Fluke T5-600 Service information

Mercury

Mercury TSL01 user manual

MAHA

MAHA MBT Series Original operating instructions

Fuji Electric

Fuji Electric P-61 instruction manual

ETC

ETC SealerAtor user manual

Skyfine

Skyfine ETHYWAY V2 user manual

Appion

Appion G5 Twin Operation manual

PCB Piezotronics

PCB Piezotronics 8159-0112A Installation and operating manual

BW Technologies

BW Technologies MicroDock II user manual

Sun Nuclear

Sun Nuclear 1027 user guide

Biomark

Biomark HPR LITE READER user manual

Hioki

Hioki 3169-20 instruction manual

Ashcroft

Ashcroft ATE-100 operating manual