The above symbol with a cross over the rubbish container can be seen on the device. This means that, when a
device reaches the end of its life, it must be taken to the official recycling/disposal centers where it must be disposed
of in an environmentally responsible manner and separately from normal domestic waste.
1.2 Connections
Caution
BEFORE INSTALLING THE ROUTER, PLEASE READ THE FOLLOWING INSTRUCTIONS CARE-
FULLY
Workplace Conditions. Main Characteristics
• Excessive cold and heat should be avoided, as should humidity and dust.
• Avoid direct exposure to sunlight and any other heat sources. Do not place the device between papers, magazines
or other items that could hinder natural air circulation.
• Do not place the device near strong electromagnetic fields such as those produced by speakers, motors, etc.
• Avoid knocks and/or strong vibrations during operation, storage and transport.
Warning
The electric current in power cables, telephone lines and communication cables is dangerous.
To prevent electric shocks, before installing, handling or opening the equipment covers, con-
nect and disconnect the cables following the steps set forth in the following section.
1.2.1 If the Ethernet cable is POE
To Connect To Disconnect
Check that the Ethernet cable is not connected to the
device.
Disconnect the Ethernet cable.
Check that the power supply is not connected to the
device
Disconnect the power supply from the device.
Check that the power supply is not connected to the main
electricity supply.
Disconnect the power supply from the main electricity
supply.
If you need redundant power, connect the power supply
to the main electricity supply.
If you need redundant power, connect the power supply
to the device.
Connect the Ethernet cable.
Teldat S.A. 1 Installing the Router
Teldat-3Ge Installation Manual 3
