Tektronix MTS400 Series User manual

Instructions

MTS4UP Upgrades

MTS400 Series and MTS400P MPEG Test Systems

075-0979-00

*P075097900*

075097900

Warning

The servicing instructions are for use by qualified

personnel only. To avoid personal injury, do not

perform any servicing unless you are qualified to

do so. Refer to all safety summaries prior to

performing service.

www.tektronix.com

suppliers, and are protected by national copyright laws and international treaty provisions.

Tektronix products are covered by U.S. and foreign patents, issued and pending. Information in this publication supercedes

that in all previously published material. Specifications and price change privileges reserved.

TEKTRONIX and TEK are registered trademarks of Tektronix, Inc.

Contacting Tektronix

Tektronix, Inc.

14200 SW Karl Braun Drive

P.O. Box 500

Beaverton, OR 97077

USA

For product information, sales, service, and technical support:

HIn North America, call 1-800-833-9200.

HWorldwide, visit www.tektronix.com to find contacts in your area.

MTS4UP MTS400 Series Upgrade Kits i

Table of Contents

General Safety Summary iii...................................

Service Safety Summary v....................................

Kit Description 1............................................

Upgrade Kits Covered by These Instructions 1..........................

Minimum Tool and Equipment List 3..................................

Kit Parts Lists 3...................................................

Upgrade Instructions 9.......................................

Option UPG Software Upgrade 10..............................

Hardware Upgrades (MTS415 and MTS430) 15...................

Access the Module Bay 15...........................................

MTS4UP IPTVD Upgrade Instructions 17...............................

MTS4UP GBE Upgrade Instructions 19.................................

MTS4UP CF, EP, QB2, or VS Upgrade Instructions 20.....................

Replace the Cabinet 23..............................................

Restore the Operating System 24......................................

Software Upgrade Instructions 31......................................

Software Key Upgrade Instructions 37..................................

Hardware Upgrades (MTS400P) 38.............................

Software Upgrade 38................................................

Access the Module Bay 43...........................................

MTS4UP IPTVP Upgrade Instructions 46...............................

Option LX, Option SX, or Option ZX SFP Module Upgrade 53.....

Table of Contents

ii MTS4UP MTS400 Series Upgrade Kits

MTS4UP MTS400 Series Upgrade Kits iii

General Safety Summary

Review the following safety precautions to avoid injury and prevent damage to

this product or any products connected to it.

To avoid potential hazards, use this product only as specified.

Only qualified personnel should perform service procedures.

Use Proper Power Cord. Use only the power cord specified for this product and

certified for the country of use.

Ground the Product. This product is grounded through the grounding conductor

of the power cord. To avoid electric shock, the grounding conductor must be

connected to earth ground. Before making connections to the input or output

terminals of the product, ensure that the product is properly grounded.

Ground Equipment connected to the Product. Ensure that any equipment

connected to this product is grounded and at the same potential.

Observe All Terminal Ratings. To avoid fire or shock hazard, observe all ratings

and markings on the product. Consult the product manual for further ratings

information before making connections to the product.

Power Disconnect. The power cord disconnects the product from the power

source. Do not block the power cord; it must remain accessible to the user at all

times.

Do Not Operate Without Covers. Do not operate this product with covers or panels

removed.

Use Proper Fuse. Use only the fuse type and rating specified for this product.

Avoid Exposed Circuitry. Do not touch exposed connections and components

when power is present.

Do Not Operate With Suspected Failures. If you suspect there is damage to this

product, have it inspected by qualified service personnel.

Do Not Operate in Wet/Damp Conditions.

Do Not Operate in an Explosive Atmosphere.

Keep Product Surfaces Clean and Dry.

Provide Proper Ventilation. Refer to the manual’s installation instructions for

details on installing the product so it has proper ventilation.

ToAvoidFireor

Personal Injury

General Safety Summary

iv MTS4UP MTS400 Series Upgrade Kits

These terms may appear in this manual:

WARNING. Warning statements identify conditions or practices that could result

in injury or loss of life.

CAUTION. Caution statements identify conditions or practices that could result in

damage to this product or other property.

These terms may appear on the product:

HDANGER indicates an injury hazard immediately accessible as you read the

marking.

HWARNING indicates an injury hazard not immediately accessible as you

read the marking.

HCAUTION indicates a hazard to property including the product.

The following symbols may appear on the product:

CAUTION

Refer to Manual

Protective Ground

(Earth) Terminal Standby

Terms in this Manual

Symbols and Terms

on the Product

MTS4UP MTS400 Series Upgrade Kits v

Service Safety Summary

Only qualified personnel should perform service procedures. Read this Service

Safety Summary and the General Safety Summary before performing any service

procedures.

Do Not Service Alone. Do not perform internal service or adjustments of this

product unless another person capable of rendering first aid and resuscitation is

present.

Disconnect Power. To avoid electric shock, switch off the instrument power, then

disconnect the power cord from the mains power.

Use Care When Servicing With Power On. Dangerous voltages or currents may

exist in this product. Disconnect power, remove battery (if applicable), and

disconnect test leads before removing protective panels, soldering, or replacing

components.

To avoid electric shock, do not touch exposed connections.

Service Safety Summary

vi MTS4UP MTS400 Series Upgrade Kits

MTS4UP MTS400 Series Upgrade Kits 1

Kit Description

This document provides instructions for performing hardware and/or software

and option key upgrades on the following Tektronix products:

HMTS400 Series MPEG Test Systems (MTS415 and MTS430)

HMTS4SA MPEG Test System

HMTS400P MPEG Test System

Upgrade Kits Covered by These Instructions

HMTS4UP UPG -- This kit provides a software upgrade for your MTS4xx

systems. This upgrade is included with all of the hardward updates, or may

be ordered separately.

As the user of an MTS400 Series MPEG Test System, you will be familiar with

the software key (or dongle) that must be attached to your unit before you can

open any of the MTS400 Series applications. Two styles of software key are

available, each performs the same function: parallel port or USB (MTS4SA

only). The option key string supplied with this upgrade kit is generated using the

serial number of the software key and the list of options to be licensed.

NOTE. Only the software applications already installed on your MPEG test

system will be available after the upgrade. If additional applications are

required, contact your Tektronix representative.

HMTS4UP IPTVD - This kit adds an IPTV Gigabit Ethernet interface with a

10/100/1000Base-T electrical port to your MTS415 or MTS430. When you

install the IPTV interface card you must remove any other installed optional

interface cards (options GBE, CF, EP, QB2, or VS).

There are three optical length input options available for option IPTVD:

HMTS4UP LX -- Adds a 1000Base-LX wavelength optical port with LC

connector (single mode 1310 nm).

HMTS4UP SX -- Adds a 1000Base--SX short wavelength optical port with

LC connector (multimode 850 nm).

HMTS4UP ZX -- Adds a 1000Base-ZX wavelength optical port with LC

connector (multimode 1550 nm).

Kit Description

2MTS4UP MTS400 Series Upgrade Kits

HMTS4UP GBE -- This kit adds a Gigabit Ethernet interface and IP Analysis

software to your MTS415 or MTS430 (SFP required). This kit may be

combined with any of the following hardware upgrade kits.

There are also four optical length input options available with option GbE:

HMTS4UP LX -- Adds a 1000Base-LX wavelength optical port with LC

connector (single mode 1310 nm).

HMTS4UP SX -- Adds a 1000Base--SX short wavelength optical port with

LC connector (multimode 850 nm).

HMTS4UP ZX -- Adds a 1000Base-ZX wavelength optical port with LC

connector (multimode 1550 nm).

HMTS4UP CU -- adds a 1000Base-T electrical port with RJ45 connector.

HMTS4UP CF -- This kit adds a COFDM DVB-T interface to your MTS415

or MTS430 instrument. This kit may only be combined with the MTS4UP

GBE kit.

HMTS4UP EP -- This kit adds a QPSK/8PSK interface to your MTS415 or

MTS430 instrument. This kit may only be combined with the MTS4UP

GBE kit.

HMTS4UP QB2 -- This kit adds a QAM B interface to your MTS415 or

MTS430 instrument. This kit may only be combined with the MTS4UP

GBE kit.

HMTS4UP VS -- This kit adds an 8VSB interface to your MTS415 or

MTS430 instrument. This kit may only be combined with the MTS4UP

GBE kit.

HMTS4UP IPTVP -- This kit adds an IPTV Gigabit Ethernet interface with a

10/100/1000Base-T electrical port to your MTS400P.

There are three optical length input options available for option IPTVP:

HMTS4UP LX -- Adds a 1000Base-LX wavelength optical port with LC

connector (single mode 1310 nm)

HMTS4UP SX -- Adds a 1000Base--SX short wavelength optical port with

LC connector (multimode 850 nm).

HMTS4UP ZX -- Adds a 1000Base-ZX wavelength optical port with LC

connector (multimode 1550 nm).

Other manuals for MTS400 Series

This manual suits for next models

Table of contents

Other Tektronix Test Equipment manuals

Tektronix

Tektronix TDS3000C Series User manual

Tektronix

Tektronix 2465 User manual

Tektronix

Tektronix AVDC100 Service manual

Tektronix

Tektronix DPO70000C Series User manual

Tektronix

Tektronix 2336YA User manual

Tektronix

Tektronix TDS3000 Series User manual

Tektronix

Tektronix DPO7AFP User manual

Tektronix

Tektronix TDS 700A User manual

Tektronix

Tektronix 2430 User manual

Tektronix

Tektronix TBS1022 Installation and maintenance instructions

Tektronix

Tektronix SC 501 User manual

Tektronix

Tektronix TDS 520B Use and care manual

Tektronix

Tektronix TBS1000C Series Use and care manual

Tektronix

Tektronix 7B53A User manual

Tektronix

Tektronix 7000 Series User manual

Tektronix

Tektronix TDS1001B Installation and maintenance instructions

Tektronix

Tektronix 2235 Owner's manual

Tektronix

Tektronix 2230 User manual

Tektronix

Tektronix TCP202A User manual

Tektronix

Tektronix MSO54B User manual

Tektronix

Tektronix 314 User manual

Tektronix

Tektronix OA 5000 Series User manual

Tektronix

Tektronix 2205 User manual

Tektronix

Tektronix MSO2024B Operating and maintenance manual

Popular Test Equipment manuals by other brands

SMART

SMART KANAAD SBT XTREME 3G Series user manual

Agilent Technologies

Agilent Technologies BERT Serial Getting started

Agilent Technologies

Agilent Technologies N3280A user guide

Vernier

Vernier Go Direct Voltage manual

Lifeloc

Lifeloc R.A.D.A.R. quick start guide

Fluke

Fluke T5-600 Service information

Mercury

Mercury TSL01 user manual

MAHA

MAHA MBT Series Original operating instructions

Fuji Electric

Fuji Electric P-61 instruction manual

ETC

ETC SealerAtor user manual

Skyfine

Skyfine ETHYWAY V2 user manual

Appion

Appion G5 Twin Operation manual

PCB Piezotronics

PCB Piezotronics 8159-0112A Installation and operating manual

BW Technologies

BW Technologies MicroDock II user manual

Sun Nuclear

Sun Nuclear 1027 user guide

Biomark

Biomark HPR LITE READER user manual

Hioki

Hioki 3169-20 instruction manual

Ashcroft

Ashcroft ATE-100 operating manual