Tektronix AWG5204 User manual

AWG5200 Series

Arbitrary Waveform Generators

Declassiﬁcation and Security

ZZZ

Instructions

www.tektronix.com

*P077133800*

077-1338-00

national copyright laws and international treaty provisions.

Tektronix products are covered by U.S. and foreign patents, issued and pending. Information in this publication supersedes that in all previously published

material. Speciﬁcations and price change privileges reserved.

TEKTRONIX and TEK are registered trademarks of Tektronix, Inc.

Contacting Tektronix

Tektronix, Inc.

14150 SW Karl Braun Drive

P.O. Box 500

Beaverton, OR 97077

USA

For product information, sales, service, and technical support:

In North America, call 1-800-833-9200.

Worldwide, visit www.tek.com to ﬁnd contacts in your area.

Table of Contents

Preface.............................................................................................................................................................. iii

Clear and Sanitize Procedures......... .. .. ......... ........... .. .. ........... ......... .. .. ........... ........... .. .. ......... ..................................... 1

Memory devices ............................................................................................................................................... 1

Media storage and data export devices...................................................................................................................... 5

AWG5200 Series Declassiﬁcation and Security Instructions i

Table of Contents

ii AWG5200 Series Declassiﬁcation and Security Instructions

Preface

This document helps customers with data security concerns to sanitize or remove memory devices from the Tektronix

AWG5200 Series Arbitrary Waveform Generators.

All of these products have data storage (memory) devices and data output devices (USB ports and a LAN Ethernet

connector). These instructions tell how to do the following:

Clear or sanitize the memory devices.

Clear or sanitize an instrument that is not functioning.

Reference The procedures in this document are written to meet the requirements speciﬁed in:

NISPOM, DoD 5220.22–M, Chapter 8

ISFO Process Manual for Certiﬁcation & Accreditation of Classiﬁed Systems under NISPOM

Products The following Tektronix products are covered by this document:

AWG5202

AWG5204

AWG5208

Related documents You can read more about your instrument in the following documents. These are available online at

www.tektronix.com/downloads.

AWG5200 Series Arbitrary Waveform Generators Installation and Safety Instructions.

AWG5200 Arbitrary Waveform Generators Speciﬁcations and Performance Veriﬁcation Technical Reference

AWG5200 Series Declassiﬁcation and Security Instructions iii

Preface

Terms The following terms may be used in this document:

Clear. This removes data on media/memory before reusing it in a secured area. All reusable memory is cleared to

deny access to previously stored information by standard means of access.

Erase. This is equivalent to clear.

Instrument declassiﬁcation. A term that refers to procedures that must be undertaken before an instrument can be

removed from a secure environment. Declassiﬁcation procedures include memory sanitization and memory removal,

and sometimes both.

Media storage/data export device. Any of several devices that can be used to store or export data from the

instrument, such as a USB port.

Nonvolatile memory. Data is retained when the instrument is powered off.

Power off. Some instruments have a “Standby” mode, in which power is still supplied to the instrument. For the

purpose of clearing data, putting the instrument in Standby mode does not qualify as powering off. For these products,

you will need to either press a rear-panel OFF switch or remove the power source from the instrument.

Remove. This is a physical means to clear the data by removing the memory device from the instrument. Instructions

are available in the product Service Manual.

Sanitize. This eradicates the data from media/memory so that the data cannot be recovered by other means or

technology. This is typically used when the device will be moved (temporarily or permanently) from a secured

area to a non-secured area.

Scrub. This is equivalent to sanitize.

User accessible. User is able to directly retrieve the memory device contents.

User-modiﬁable. The user can write to the memory device during normal instrument operation, using the instrument

interface or remote control.

Volatile memory. Data is lost when the instrument is powered off.

iv AWG5200 Series Declassiﬁcation and Security Instructions

Clear and Sanitize Procedures

Memory devices

The following tables list the volatile and nonvolatile memory devices in the instrument and listed options. Detailed

procedures to clear or sanitize these devices, if any, are shown following each table.

Terminology The following terms are used in the tables in this section:

User data – Describes the type of information stored in the device. Refers to waveforms or other measurement data

representing signals connected to the instrument by users.

User settings – Describes the type of information stored in the device. Refers to instrument settings that can be

changed by the user.

Both – Describes the type of information stored in the device. It means that both user data and user settings are

stored in the device.

None – Describes the type of information stored in the device. It means that neither user data nor user settings

are stored in the device.

Directly – Describes how data is modiﬁed. It means that the user can modify the data.

Indirectly – Describes how data is modiﬁed. It means that the instrument system resources modify the data and that

the user cannot modify the data.

AWG5200 Series Declassiﬁcation and Security Instructions 1

Clear and Sanitize Procedures

Table1:Volatilememorydevices

Type and

min. size Function

Type of

info stored

(system/user)

Backed up by

battery?

Method of

modiﬁcation

Data input

method Location User accessible? To clear/sanitize

SDRAM

≥4GB(std)

PC system memory Both No Directly Written by

processor system

Slot-PC board Yes Remove the power source from

the instrument for at least 20

seconds.

SDRAM

4Gbit

AWG playback

memory

User No Indirectly Firmware

operations

AWG board No Remove the power source from

the instrument for at least 20

seconds.

SRAM 64k x

USBTMC buffer Both No Indirectly Firmware

operations

System board No Remove the power source from

the instrument for at least 20

seconds.

Table 2: Nonvolatile memory devices

Type and

min. size Function

Type of user

info stored

Method of

modiﬁcation

Data input

method Location User accessible To clear/sanitize

Flash,

1Gbit

FPGA Image, Calibration Constants None Indirect Firmware

operations

AWG board No N/A 1

Flash,

512 Mbit

FPGA Image, Instrument Model &

Serial Number, Enabled Options

None Indirect Firmware

operations

System board No N/A 1

EEPROM

1Mbit

USBTMC proﬁle None Indirect None System board No N/A 1

EEPROM

64 kbit

Calibration Constants None Indirect Firmware

operations

Clock board No N/A 1

Flash,

1Gbit

Calibration Constants None Indirect Firmware

operations

Marker board No N/A 1

2AWG5200 Series Declassiﬁcation and Security Instructions

Clear and Sanitize Procedures

Table 2: Nonvolatile memory devices (cont.)

Type and

min. size Function

Type of user

info stored

Method of

modiﬁcation

Data input

method Location User accessible To clear/sanitize

Flash,

1Gbit

Calibration Constants None Indirect Firmware

operations

Output/DACboard No N/A 1

Removable

Hard Drive

Holds instrument operating system

and application software. Holds

all user-storable data such as

waveforms, measurement results,

and instrument settings.

User data, user

settings

Indirect Firmware

operations, user

input

Front panel Yes To clear, see footnote 2

To sanitize, see footnote 3

1This device does not contain user data or settings. Clearing would disable instrument functionality.

2To clear, reformat the hard drive using the procedure “Restore the OS and AWG application” in this document.

3To sanitize, remove the hard drive. Store the removed hard drive in a secure area or destroy it.

AWG5200 Series Declassiﬁcation and Security Instructions 3

Clear and Sanitize Procedures

Clearorsanitize

instrument

Use this procedure to clear the AWG waveform cache and last setup cache from your instrument. This procedure does not

erase or change factory calibration constants.

1. In the toolbar, click the Reset to Default Setup button.

2. Close the AWG application.

3. Open the AWG application.

Clear or sanitize a

non-functional instrument

If your instrument is not functioning, proceed as follows.

1. Remove the hard disk drive before returning the instrument for repair.

2. Remove any attached USB ﬂash drive before returning the instrument for repair.

Refer to your organization’s policies regarding storage or disposal of any removed items.

Restore the OS and AWG

application

Use this procedure to restore the operating system and the AWG application on your instrument to the original factory

condition. This procedure does not erase or change factory calibration constants.

NOTE. This utility reformats the hard disk drive during the restore process. All user data will be removed. (The Acronis

Recovery partition and the related data are not destroyed.)

The restore images remain, providing the ability to repeat the recovery process.

The Windows operating system provided is designed for this instrument's hardware and product software.

1. Attach a keyboard to the instrument.

2. Power on the instrument. During the boot-up process you will see the following message at the top of the screen:

Starting Acronis Loader... press F5 for Acronis Startup Recovery Manager

3. Repeatedly press the F5 key until the Acronis True Image Tool opens.

4AWG5200 Series Declassiﬁcation and Security Instructions

This manual suits for next models

Table of contents

Other Tektronix Portable Generator manuals

Tektronix

Tektronix RTX130B User manual

Tektronix

Tektronix TSG4100A Series Operating and maintenance manual

Tektronix

Tektronix AFG31000 Series User manual

Tektronix

Tektronix AFG2021-BR User manual

Tektronix

Tektronix AWG5000B Series User manual

Tektronix

Tektronix AFG2000 User manual

Tektronix

Tektronix TG8000 Use and care manual

Tektronix

Tektronix SPG 1000 User manual

Tektronix

Tektronix TSG 95 User manual

Tektronix

Tektronix AWG5200 Series Use and care manual

Tektronix

Tektronix AWG5200 Series User manual

Tektronix

Tektronix AWG610 User manual

Tektronix

Tektronix ECO422D User manual

Tektronix

Tektronix SW503 User manual

Tektronix

Tektronix TG 2000 User manual

Tektronix

Tektronix Tektronix SPG8000 Installation and maintenance instructions

Tektronix

Tektronix SPG3UP 01 User manual

Tektronix

Tektronix AFG3000 Series User manual

Tektronix

Tektronix VITS 201 User manual

Tektronix

Tektronix AWG2005 User manual

Tektronix

Tektronix DTG5078 User manual

Tektronix

Tektronix 106 Product guide

Tektronix

Tektronix TG8000 Operating and maintenance manual

Tektronix

Tektronix TG700 User manual

Popular Portable Generator manuals by other brands

Kohler

Kohler 20EORZ Operation

Powerhorse

Powerhorse 83171 owner's manual

HURST

HURST ML-630-SI instruction manual

ETQ

ETQ TG4000 owner's manual

Briggs & Stratton

Briggs & Stratton 40265 Illustrated parts list

ConMed

ConMed 7550 Service manual

Owon

Owon Waveform Generator manual

evertz

evertz 7700 Series manual

Power Stroke

Power Stroke PS906025 Operator's manual

Firefly

Firefly Cygnus CYG2400/460/24 user manual

Draper

Draper PG950S Instructions for

PowerBoss

PowerBoss PowerBoss Operator's manual

SDMO

SDMO SH 4000 Generating set user and maintenance manual

EINHELL

EINHELL STE 5500 operating instructions

Wanco

Wanco WI3000P Operator's manual

Full Boar

Full Boar FBT-3300 instruction manual

Dwyer Instruments

Dwyer Instruments ASG manual

Westinghouse

Westinghouse WH1000i Series owner's manual