TEGRAS Concept eon User manual
Electric brushing robot
user manual EN
original manual translation
Electric brushing robot 2-36
eon
introduction
Training service
Technical service
Thank you very much for placing your trust in a quality product from TEINNOVA.
This product is manufactured using modern production processes and extensive
quality assurance measures.
We try to do everything possible to ensure that you are satisfied with this product and
can work with it without any problems.
If you have any questions about this product, please contact your dealer or our
company directly.
Before operating the machine, carefully read the operating instructions for your
equipment.
Please consider this manual as part of the machine and keep it handy for future
reference.
We offer the option of providing companies with specific training in the use of
our equipment and training their operators to provide the best service and thus
contribute to the success of their end customers.
Aspects such as knowing how to draw up a good estimate objectively, responding to
specific problems that may arise, or offering a more professional and efficient service.
Thanks to our own manufacturing of cleaning equipment we can control at all times
the quality and performance of each machine we manufacture, and this has allowed
us to have very low repair ratios which have always been solved with our own
Technical Service led by the same team that manufactures it, and in very short
periods of time.
We have all types of spare parts for your equipment, as well as related accessories.
These operating instructions are protected by copyright. We reserve all rights, in particular the right of
production, translation and processing with electronic systems.
Dear customer:
©
Electric brushing robot 3-36
eon
symbology
safety warnings
conditions of use
know your machine
control panel
accessories and related equipment
operating instructions
5-36
6-36
7-36
8-36
9-36
11-36
17-36
remote control
10-36
index
Electric brushing robot 4-36
eon
index
transport
maintenance and care
waste management
technical specifications
CE declaration of conformity
31-36
32-36
33-36
34-36
36-36
warranty conditions
35-36
use of chemical products
30-36
Electric brushing robot 5-36
eon
symbology
DANGER!
WARNING!
CAUTION!
IMPORTANT NOTE!
All the existing graphic symbols in this manual as well as those indicated on the equipment itself are explained
in this section, it is important to read with special attention the text related to this symbology since it is related to
personal and equipment safety.
This symbol alerts you to a potentially hazardous situation which can result in
death or serious injury if the instructions are not followed properly. Be sure to
read all instructions described in the “Safety Information” section.
This symbol alerts you to a potentially hazardous situation which may result in
minor or moderate injury, or property damage resulting in personal injury if you
do not properly follow the instructions.
This symbol alerts you to a situation that may result in property damage
without personal injury if you do not properly follow the instructions.
This symbol alerts you to information regarding the optimal use of the
equipment to avoid possible misuse.
Electric brushing robot 6-36
eon
The EON equipment must NOT be used for purposes other than those described in this instruction
manual.
Before starting up the equipment, make sure that all electrical and fluid connections are correct.
Before starting the equipment, make sure that the brush is inside the duct to be cleaned.
Be careful to place your EON on a smooth and stable surface. Lock the brakes on the front wheels to
keep the machine stable while working.
Persons operating EON equipment must be sufficiently trained.
Hold the hose firmly before operating the air brush motor. Keep a firm grip on the hose at all times while
operating the brush.
Safety goggles must be worn to prevent chemical splashes or dust from reaching the operator’s eyes.
Properly tie down your equipment and activate the wheel lock during transport in a vehicle.
Do not open the control box of your EON duct cleaning robot. In the event of a fault, please contact
TEINNOVA’s Technical Assistance Service on +34 941 44 50 56.
safety warnings
Electric brushing robot 7-36
eon
Any other use is strictly prohibited
without the written permission of
the manufacturer.
Donotplacethedeviceinahorizontal
position under any circumstances,
as this could lead to malfunctions.
EON is a machine for cleaning both circular ducts, with diameters of 200-600mm, and rectangular ducts. The
ducts can be for smoke extraction, chimneys or even air conditioning installations. Suitable accessories must
be provided for each duct.
In order to clean grease ducts, it must be used in conjunction with the IFOAM foaming agent, as shown in the
diagram of use.
conditions of use
ifoam compactifoam compact
Intelligent active foam
generator and rinsing
eoneon
Electric brushing robot for duct
cleaning
LEGEND chemical and low pressure rinsing
power supply
mains water
Electric brushing robot 8-36
eon
1- Control panel
2- LED strip
3- On/Off button
4- Control bracket
5- Power cable support
6- Reel rotation lock
7- Rear wheel brake
8- Front wheel
9-Connection with your IFOAM
10- Resettable fuse
11- Electrical connection
12- HMI screen
13- Emergency stop button
14- Brush
15- Brush coupling
know your machine
Components:
13
7
6
11
3
1
12
14
8
15
2
4
5
10
9
Electric brushing robot 9-36
eon
Main control panel:
control panel
1
2
3
General Switch
Touch screen
Emergency Mushroom
Switching the equipment on and off
Emergency stop
The equipment is controlled via the touch screen.
4LED Strip Indicates the status of the machine
Electric brushing robot 10-36
eon
remote control
Remote control:
2
3
4
1
5
Unlock button
Right Turn
STOP
Left Turn
Timer
Button for activating the above functions. In order to start a
function, both buttons must always be pressed at the same
time.
Operate the motor of the EON planing machine so that its
rotational movement is counterclockwise.
Operate the timer on the EON brushing machine so that its
rotary movement lasts for the selected time.
General shutdown of any system in operation.
Operate the motor of the EON planing machine so that its
rotational movement is clockwise.
1 Battery12V.
Alkaline 23A
5
2
4
1
3
A
Table of contents
Other TEGRAS Concept Cleaning Equipment manuals
