Tecnoautomation TASFD6T User manual

ANTI-VANDALISM KEYPAD AND CARD READER

single and / or dual channel, Standalone - Wiegand

tecnoautomation

T.A. Tecno Automazione s.r.l. - Via Vicinale snc - 03018 - Paliano - (FR) - Italy - Tel +39 0775 533677 - Fax +39 0775 533299 - [email protected] - www.tecnoautomation.com - www.tecnoautomazione.com

tecnoautomation

TASFD6T

Important warnings

TA reserves the right to make any technical change to the product without prior noce; it also declines

any responsibility for damages to persons or things due to improper use or improper installaon of the proximity

access control TASFD6T.

This instrucons manual is intended only for qualiﬁed technical personnel in the industry of entry system

installaons.

No informaon contained in this manual is intended to end users.

Product overview

TASFD6T keypad from TA is a waterproof stand-alone access control device, programmable. It can be also

a standard Wiegand output keypad/reader player. It manag es 1000 users/codes. It has a simple design, easy

operaons and has high reliability.

The device allows access through the use of an access code, a card/tag or a card/tag in combinaon with an access

code or an input management through a bluetooth applicaon compable with all smartphones..

1 Gate opening

2 Heang systems

3 Acvaon or deacvaon of the alarm system

4 Acvaon or deacvaon of supervision and monitoring systems

5 Acvaon or deacvaon of automac monitoring system

6 Acvate or deacvate vending machines

7 Acvate or deacvate pumping staons

8 Transport: vehicle power control

9 Boats: acvaon and deacvaon of the power supply unit

10 Acvaon or deacvaon of valves, generally an example for oil and gas pipelines

11 Industrial Automaon: various commands.

12 Etc…

tecnoautomation

T.A. Tecno Automazione s.r.l. - Via Vicinale snc - 03018 - Paliano - (FR) - Italy - Tel +39 0775 533677 - Fax +39 0775 533299 - [email protected] - www.tecnoautomation.com - www.tecnoautomazione.com

Technical data

Components descripon

Power supply: 12/28 Vac/dc

Idle current: ≤ 35 mA

Working current: ≤ 100 mA

Card pology: Card/tag 125 KHz EM and HID

Users capacity: 1000 Users (PIN code or card/tag)

Wiring connecons: Standalone relay output, Wiegand output, exit buon, alarm

Relay:

Relay closing me: Adjustable, from 1 to 99 seconds

Maximum load: 2 Amp

Wiegand interface: 26 bits

Operang temperature: -40°C / + 60°C

Operang humidity: 0% RH – 98% RH

Material: Zinc alloy

IP protecon rate: IP66

Dimensions: 134 x 55,5 x 21

Net weight: 340 g

tecnoautomation

T.A. Tecno Automazione s.r.l. - Via Vicinale snc - 03018 - Paliano - (FR) - Italy - Tel +39 0775 533677 - Fax +39 0775 533299 - [email protected] - www.tecnoautomation.com - www.tecnoautomazione.com

Installaon

- Remove the back cover from the unit;

- Drill 2 holes (A,C) on the wall for the screws and one hole for the cable (B);

- Fix the back cover ﬁrmly on the wall with 2 ﬂat head screws (provided);

- Aach the unit to the back cover.

Comunicaon details

The TASFD6T reader allows you to control ANY DEVICE through one or more NO / NC dry contacts, such as locks,

gates, hydraulic pumps, security systems such as alarms, video surveillance or an-intrusion, any type of automaon,

etc. , through two types of communicaon:

- Wiegand;

- Standalone.

Standalone mode allows the device to command ANY DEVICE through the NO/NC contacts and to use auxiliary

command and/or alarm funcons directly from the TASFD6T device (page 5).

Wiegand mode allows the TASFD6T to switch NO/NC contacts to command ANY DEVICE.

The reader, however, will not manage the contacts directly but will do it through the decoding board ensuring

reliability and security to the enre system: with the Wiegand communicaon a malicious person eve n if he tampers

with the external ﬁngerprint can not control the NO/NC contacts and consequently to enable any device connected

to it (page 11).

tecnoautomation

T.A. Tecno Automazione s.r.l. - Via Vicinale snc - 03018 - Paliano - (FR) - Italy - Tel +39 0775 533677 - Fax +39 0775 533299 - [email protected] - www.tecnoautomation.com - www.tecnoautomazione.com

Standalone mode

Standalone mode allows the device to command ANY DEVICE through the NO/NC contacts and to use auxiliary

command and/or alarm functions directly from the TASFD6T device.

Connecon diagram

Cable color Nome contao Funzione

Basic Standalone wiring

Red 12/28 V + 12/28 Vac/dc – Power input

Black 12/28 V – 12/28 Vac/dc – Power input

Blue NO Normally open relay output (Install diode provided)

Purple COM Common connecon for relay output

Orange NC Normally closed relay output (Install diode provided)

Advanced Input and Output features

Pink GND Ground – Negave pole

Yellow Input_1 Device for opening the lock input (ex: internal exit buon)

Grey Output_Alarm Negave contact for Alarm (Voltage 12 -28 Vac/dc – 2 A)

Brown Sensor Opening sensor input (Normally closed)

WARNING:

In Standalone mode if the power supply of our product is the same that feeds the accessory on the exchange

auxiliary contacts, you must put the diode marked in blue supplied.

In Standalone mode it isn’t mandatory to connect all the cables of the TASFD6T, for example in the absence of an

exit buon it is possible to leave the yellow cable disconnected but it must not make contact with the others to

avoid malfuncons.

tecnoautomation

T.A. Tecno Automazione s.r.l. - Via Vicinale snc - 03018 - Paliano - (FR) - Italy - Tel +39 0775 533677 - Fax +39 0775 533299 - [email protected] - www.tecnoautomation.com - www.tecnoautomazione.com

Programming

General programming informaon

User ID code: an idenﬁcaon and unique user ID is associated to each card / tag or PIN entered.

The user ID can be any number from 1 to 1000.

In order to be able to change the sengs of the keypad it is necessary to access the programming mode, to be

able to do so it is necessary to be aware of the Master Code, a code consisng of 6 digits that only the

administrator / installer of the device must know.

Default Master Code value: "123456". We recommend modifying the code for greater security.

Basic setup

Changing Master Code

Working descripon Combinaon keys

Entering the programming mode (Digit Master Code)

Change Master Code

(Master Code is any 6-digit number)

（Digit new Master Code）（Repeat

new Master Code）

Exit Setup Mode

Add users

Add PIN code by assigning a speciﬁc user ID

Working descripon Keystroke combinaon

Entering the programming mode (Digit Master Code)

Add a PIN code by assigning a speciﬁc user ID.

User ID: any number from 0 to 997

PIN code: any number from 4 to 6 digits

(Digit user ID) (Digit PIN code)

Exit Setup Mode

Add a card / tag by assigning a speciﬁc user ID

Working descripon Keystroke combinaon

Entering the programming mode (Digit Master Code)

Add card / tag by assigning a speciﬁc user ID.

User ID: any number from 0 to 997

(Digit user ID) (Read card)

Exit Setup Mode

Add one or more cards / tags using the "Master Add Card" provided

Working descripon Keystroke combinaon

Entering the programming mode Read “Master Add Card” on the reader

Add on or more card Read one or more cards on the reader

Exit Setup Mode Read “Master Add Card” on the reader

Remove users

Remove a card / tag through the card / tag itself

Working descripon Keystroke combinaon

Entering the programming mode (Digit Master Code)

Remove a card throught the card itself (Read card)

Exit Setup Mode

tecnoautomation

T.A. Tecno Automazione s.r.l. - Via Vicinale snc - 03018 - Paliano - (FR) - Italy - Tel +39 0775 533677 - Fax +39 0775 533299 - [email protected] - www.tecnoautomation.com - www.tecnoautomazione.com

tecnoautomation

T.A. Tecno Automazione s.r.l. - Via Vicinale snc - 03018 - Paliano - (FR) - Italy - Tel +39 0775 533677 - Fax +39 0775 533299 - [email protected] - www.tecnoautomation.com - www.tecnoautomazione.com

Remove a card / tag or PIN code through the user ID

Working descripon Keystroke combinaon

Entering the programming mode (Digit Master Code)

Remove a card / tag or PIN using the user ID (Digit user ID)

Exit Setup Mode

Remove all users

Working descripon Keystroke combinaon

Entering the programming mode (Digit Master Code)

Remove all users (Digit Master Code)

Exit Setup Mode

Remove one or more cards / tags using the "Master Delete Card" provided

Working descripon Keystroke combinaon

Entering the programming mode Read the "Master Delete Card" on the reader

Remove one or more cards / tags Read one or more cards on the reader

Exit Setup Mode Read the "Master Delete Card" on the reader

Set relay opening / closing mode

This funcon allows you to set the device access mode.

In parcular it is possible to acvate / deacvate the output connected to the reader through the following opons:

Opon 1) with card / tag detecon only;

Opon 2) with card / tag detecon and subsequent PIN code entry;

Opon 3) with card / tag detecon or by entering the PIN code (Default).

Opon 1 programming)

Select relay opening / closing with ONLY card / tag detecon

Working descripon Keystroke combinaon

Entering the programming mode (Digit Master Code)

Select relay opening / closing with card / tag

detecon ONLY

Exit Setup Mode

Opon 1 using)

Open / close the relay with card tag

Open / close the relay with card / tag (Read card/tag on the reader)

Opon 2 programming)

Select relay opening / closing with card/tag detecon and subsequent PIN code entry

Working descripon Keystroke combinaon

Entering the programming mode (Digit Master Code)

Select open / close relay with card/tag detecon

and subsequent PIN entry

Exit Setup Mode

Opon 2 using)

Open / close the relay with card/tag detecon and subsequent PIN entry

Open / close the relay with card/tag detecon and

subsequent PIN entry

(Read card on the reader) (Digit PIN code)

tecnoautomation

T.A. Tecno Automazione s.r.l. - Via Vicinale snc - 03018 - Paliano - (FR) - Italy - Tel +39 0775 533677 - Fax +39 0775 533299 - [email protected] - www.tecnoautomation.com - www.tecnoautomazione.com

tecnoautomation

T.A. Tecno Automazione s.r.l. - Via Vicinale snc - 03018 - Paliano - (FR) - Italy - Tel +39 0775 533677 - Fax +39 0775 533299 - [email protected] - www.tecnoautomation.com - www.tecnoautomazione.com

Opon 3 programming)

Select relay opening / closing with card / tag detecon or with PIN code entry

Working descripon Keystroke combinaon

Entering the programming mode (Digit Master Code)

Select relay opening / closing with card / tag

detecon or with PIN code entry

Exit Setup Mode

Opon 3 using)

Open / close relay with card / tag detecon or PIN code detecon

Open / close the relay with card / tag detecon (Read card on the reader)

Open / close relay with PIN code detecon (Digit PIN code)

Relay conﬁguraon

Set relay opening mode: MONOSTABLE (Default)

Working descripon Keystroke combinaon

Entering the programming mode (Digit Master Code)

Monostable mode (Default 5 seconds)

The relay opening me can be set from 1 to 99

seconds (1 = 50 mS)

(Digit a number from 1 to 99)

Exit Setup Mode

Set relay opening mode: BISTABLE

Working descripon Keystroke combinaon

Entering the programming mode (Digit Master Code)

Bistable mode (Set the relay opening / closing in ON

/ OFF mode)

Exit programming mode

Set jamming mode

The "jamming mode” will be acvated aer 10 detecons of unauthorized users, therefore of failed aempts.

This funcon can be set to deny access for 10 minutes and be deacvated only aer entering a valid card / tag or the

Master Code.

Jamming mode: OFF (Default)

Working descripon Keystroke combinaon

Entering the programming mode (Digit Master Code)

Jamming mode OFF (Default)

Exit Setup Mode

Jamming mode: ON without alarm

Working descripon Keystroke combinaon

Entering the programming mode (Digit Master Code)

Jamming mode ON without alarm

Access will be denied for 10 minutes

Exit Setup Mode

tecnoautomation

T.A. Tecno Automazione s.r.l. - Via Vicinale snc - 03018 - Paliano - (FR) - Italy - Tel +39 0775 533677 - Fax +39 0775 533299 - [email protected] - www.tecnoautomation.com - www.tecnoautomazione.com

Jamming mode: ON with alarm

Alarm conﬁguraon

Alarm: ON (Default)

Working descripon Keystroke combinaon

Entering the programming mode (Digit Master Code)

Alarm ON (Default 1 minute)

If the blinding mode is acve, the alarm will be

acvated when there are 10 incorrect aempts,

while if it is deacvated only the an-tamper will be

acvated.

(Digit a number from 1 to 3)

Exit Setup Mode

Alarm: OFF

Working descripon Keystroke combinaon

Entering the programming mode (Digit Master Code)

Alarm OFF

Warning: this operaon will disable the blinding with

alarm mode

Exit Setup Mode

Working descripon Keystroke combinaon

Entering the programming mode (Digit Master Code)

Jamming mode ON with alarm

Enable alarm, need enter Valid PIN or Fingerprint to

silence

Exit Setup Mode

tecnoautomation

T.A. Tecno Automazione s.r.l. - Via Vicinale snc - 03018 - Paliano - (FR) - Italy - Tel +39 0775 533677 - Fax +39 0775 533299 - [email protected] - www.tecnoautomation.com - www.tecnoautomazione.com

Wiegand mode

The Wiegand mode allows the keypad to switch between NO / NC contacts to control ANY DEVICE remotely via a

decoder board.

The reader will therefore not manage the contacts directly but will do it through a decoding card guaranteeing

reliability and security to the enre system: thanks to the Wiegand communicaon a malicious person even if he had

to tamper with the external biometric reader would not be able to command the NO / NC contacts and consequently

to enable any device connected to it.

In order to use the Wiegand mode of the TASFD6T keypad it is necessary to connect it to a remote decoder board.

WARNING: Before being able to add a user to the decoder card, it must be stored on the biometric reader.

Wiegand mode wiring

Cable color Contact name Funcon

Red +12 Vdc 12V DC - Posive pole

Black GND 12V DC - negave pole

Green Data 0 Exit Wiegand - Date 0

White Data 1 Exit Wiegand - Data 1

tecnoautomation

T.A. Tecno Automazione s.r.l. - Via Vicinale snc - 03018 - Paliano - (FR) - Italy - Tel +39 0775 533677 - Fax +39 0775 533299 - [email protected] - www.tecnoautomation.com - www.tecnoautomazione.com

Table of contents

Other Tecnoautomation Keypad manuals