Technotape 3DT.SUB.OVN.001 User manual
USER MANUAL
THE 3D SUBLIMATION OVEN
CONTENTS
2
CONTENTS
Sublimation Oven
1.1 Overview
1.2 Technical Data
1.3 Safety Arrangements of the 3D Sublimation Oven
1.4 Safety Arrangements at the workplace
Installation
2.1 First Time Use
2.2 Installation
Working with the 3D Sublimation Oven
3.1 Quality Guarantee and Support
3.2 Setting Parameters
3.3 Recommended Settings
3.4 Placing the Jigs
3.5 Get Started
Maintenance
4.1 Maintenance
4.2 Replacing the Main Fuse
4.3 Replacing the Filters
Ec-Conformance-Decleration
4
5
6
6
7
8
9
9
10
11
11
12
12
12
14
15
15
16
17
3
3D SUBLIMATION OVEN
4
3D SUBLIMATION OVEN
1.1 Overvieuw
Ventilation grill
Control display
Baseplate and
product jigs
Drawer
Main switch
Main fuse
power cable
with connector
Handle
5
The oven is equipped with different safety
arrangements, to make a safe usage possible.
Main Fuse 10A
The 10A Fuse is located on the back side of the oven. The Fuse
protects the oven from damages and in case of a short circuit. If
necessary, replace the Fuse.
The instruction manual for the
replacement is described in point 4.2.
Thermal Fuse
Inside the oven a Thermal Fuse is placed.
Automatic drawer opener
The drawer of the oven will open automatically at the end of the
process.
1.2 Techical Data
Press Dimension: 55,6 x 67,5 x 33,5 cm
Weight: 48 KG
Operating Voltage: 230 VAC
Rated Power: 1500 W
Fuse: 10A
Max. Temperature: 180°C
Temperature Range: 0 - 180°C
Max. Bar: -1 Bar
1.3 Safety Arrangements of the 3D Sublimaton Oven
3D SUBLIMATION OVEN
6
Testing the oven
After correct installation of the oven it is important to ensure
that the oven works properly, isn’t damaged and has no safety
defects. Testing can only be done
by the employee or another authorized person and is mandatory
to guarantee correct installation and safe usage of the oven. If
any irregularities regarding
functionality or safety are found during testing, these have to be
noted and reported to Technotape International in written form
within 7 days. Until clarication the oven cannot be used.
Information and Education
The employer has to make arrangements to give all information
about the function and the range of application to the user. In
particular the user needs to be acquainted with the complete
manual and be explicitly informed of the dangers of working with
the oven. The details have to be explained in a coherent
form and language.
Safety Distance and Ventilation
The oven has to be installed in a place which gives enough
space on both sides to put the material on. The space in front
of the oven has to be wide enough to let nothing disturb the
user at work. Using the oven with certain materials may create a
strong smell. That’s why the user should evaluate the need for a
ventilation system at the workplace.
Safety Intructions
• The oven should only be used by trained personnel after noti-
ce of this manual.
• Only one person is allowed to work on the oven at the time.
• Beware of the inside of the oven - the risk of burns may occur.
• The power cable has to be pulled out of the power outlet for
maintenance.
• Do not connect this oven to any other outlet (socket) than tho-
se equipped with ground-fault protection ELCB (Earth Leakage
Circuit Breaker).
1.4 Safety Arragements at the Workspace
3D SUBLIMATION OVEN
7
INSTALLATION
8
INSTALLATION
Important Precautions and
Recommendations
After having unpacked the Technotape 3D oven, check to ensure
that it is not damaged. In case of doubt, do not use it and
consult your supplier or a professionally qualied technician.
Packing elements (i.e. plastic bags, polystyrene foam, packing
straps, etc.) should not be left around.
• Do not attempt to modify the technical characteristics of the
appliance as this may become dangerous to use.
• Do not carry out cleaning or maintenance operations on the
appliance without having previously disconnected it from the
electric power supply.
• After use, ensure that the power switch is in the off position.
• During and after use of the appliance, certain parts will beco-
me very hot. Do not touch hot parts. Care should be taken to
avoid touching heating elements inside the oven.
Caution
• This oven must be installed in accordance with these installa-
tion instructions.
• This appliance is to be installed
only by an authorized person.
• This oven shall only be operated by trained personnel.
• Incorrect installation, for which the manufacturer accepts no
responsibility, may cause personal injury of damage.
• Always disconnect the oven from the power supply before
carrying out any maintenance operations or repairs.
2.1 First Time Use
2.2 Installation
Instructions
1.The oven must be connected to the power supply. Check that
the voltage corresponds to the value given in the rating plate
and that the electrical cable sections can withstand the load
specied on the plate. The plug must be connected to an
earthed socket in compliance with safety standards.
2.Switch the oven on with the main switch. No further assembly
is required.
3.Please continue to chapter 3 ‘Working with the 3D Sublimati-
on Oven’.
Warning
When correctly installed, your product meets all safety require-
ments laid down for this type of product category.
Fire risk! Do not store ammable material in the oven. Always
use oven gloves when removing products from the oven whilst
hot. The manufacturer declines all liability for injury to persons
or damage to property caused by incorrect or improper use of
the appliance.
DO NOT lift the oven by the door handle.
9
WORKING WITH THE 3D SUBLIMATION OVEN
10
Table of contents
