Technoline TEMPERATURE STATION User manual

WIRELESS 868 MHz TEMPERATURE STATION

Instruction Manual

INTRODUCTION:

Congratulations on purchasing this compact 868MHz Temperature Station which

simultaneously displays time, indoor temperature and outdoor temperature

readings. With only two keys, being easy to operate, this product is ideal for use in

the home or office.

FEATURES:

LCD

Displa

Function

Keys

Hanging

Hole

Battery

compartment

cover

Removable

stand

The Temperature Station

• Quartz clock in 12 or 24-hour time display (hour and minute, manually set)

• Indoor and outdoor temperature reading in or degree Celsius (°C) or

Fahrenheit (°F)

• Can receive up to two outdoor transmitters for 3 outdoor channels

• Can show the outdoor reading of channel 1, 2 and 3 simultaneously

• Wireless transmission at 868 MHz

• Signal reception intervals at 4 seconds

• Minimum and Maximum records of indoor temperature and outdoor

temperature

• Low battery indicator

• Wall mounting or table standing

The Outdoor Temperature Transmitter

• Remote transmission of outdoor temperature to

Temperature Station by 868 MHz

• Shower proof casing

• Wall mounting case (Mounting at a sheltered place.

Avoid direct rain and sunshine)

SETTING UP:

When one transmitter is used

1. First, insert the batteries into the Temperature transmitter. (see “Install

and replace batteries in the Temperature transmitter“).

2. Immediately after and within 30 seconds, insert the batteries into

Temperature station (see “Install and replace batteries in the

Temperature station”). Once the batteries are in place, all segments of

the LCD will light up briefly. Following the time as 0:00 and the indoor

temperature will be displayed. If these are not displayed after 60 seconds,

remove the batteries and wait for at least 10 seconds before reinserting

them.

3. After inserting the batteries, the Temperature station will start receiving

data from the transmitter. The outdoor temperature and the signal

reception icon should then be displayed on the Temperature station. If this

does not happen after 3 minutes, the batteries will need to be removed

from both units and reset from step 1.

4. In order to ensure sufficient 868 MHz transmission however, this should

under good conditions be a distance no more than 100 meters between

the final position of the Temperature station and the transmitter (see notes

on “Mounting” and “868 MHz Reception”).

When more than one transmitter is used

1. User shall remove all the batteries from the temperature station and

transmitters and wait for 60 seconds if setting has been done with one

transmitter before.

2. Insert the batteries to the first transmitter.

3. Within 30 seconds of powering up the first transmitter, insert the batteries to

the Temperature station. Once the batteries are in place, all segments of the

LCD will light up briefly. Following time as 0:00 and the indoor temperature

will be displayed. If they are not shown in LCD after 60 seconds, remove the

batteries and wait for at least 60 seconds before reinserting them.

4. The outdoor temperature from the first transmitter (channel 1) should then

be displayed on the Temperature station. Also, the signal reception icon will

be displayed. If this does not happen after 2 minutes, the batteries will need

to be removed from both units and reset from step 1.

5. Insert the batteries to the second transmitter as soon as the outdoor

temperature readings from the first transmitter are displayed on the

Temperature station.

Note: User shall insert the batteries into the second transmitter within 10 seconds

of reception of the first transmitter.

6. The outdoor temperature from the second transmitter and the "channel 2"

icon should then be displayed on the Temperature station. If this does not

happen after 2 minute, the batteries will need to be removed from all the

units and reset from step 1.

7. Insert the batteries to the third transmitter as soon as the "channel 2" icon

and outdoor data are displayed on the Temperature station. Then within 2

minutes, the channel 3 outdoor data from the third transmitter will be

displayed and the channel icon will shift back to "1" once the third

transmitter is successfully received. If this is not happen, user shall restart

the setting up from step 1.

Note: User shall insert the batteries into the third transmitter within 10 seconds of

reception of the second transmitter.

8. In order to ensure sufficient 868 MHz transmission however, this should

under good conditions be a distance no more than 100 meters between

the final position of the Temperature station and the transmitter (see notes

on “Mounting” and “868 MHz Reception”).

IMPORTANT:

Transmission problems will arise if the setting for additional sensors is not followed

as described above. Should transmission problems occur, it is necessary to

remove the batteries from all units and start again the set-up from step 1.

HOW TO INSTALL AND REPLACE BATTERIES IN THE TEMPERATURE

STATION The Temperature Station uses 2 x AAA, IEC LR3, 1.5V

batteries. When batteries will need to be replaced, the

low battery icon will appear on the LCD. To install and

replace the batteries, please follow the steps below:

1. Lift up the battery compartment cover.

2. Insert batteries observing the correct polarity (see

marking).

3. Replace compartment cover.

Table of contents

Other Technoline Weather Station manuals

Technoline

Technoline WS 6750 User manual

Technoline

Technoline WD 3050 User manual

Technoline

Technoline WS6620 User manual

Technoline

Technoline WS 9130 User manual

Technoline

Technoline WS 6830 User manual

Technoline

Technoline WS 6710 User manual

Technoline

Technoline WS6442 User manual

Technoline

Technoline WS 9485 User manual

Technoline

Technoline WS6650 User manual

Technoline

Technoline WS6767 User manual

Technoline

Technoline WS 6720 User manual

Technoline

Technoline WS 9273 User manual

Technoline

Technoline WS 9065 User manual

Technoline

Technoline WS9620 User manual

Technoline

Technoline WS8014 User manual

Technoline

Technoline WS6762 User manual

Technoline

Technoline WS6446 User manual

Technoline

Technoline WS6825 User manual

Technoline

Technoline WS9135 User manual

Technoline

Technoline WS-9136 User manual

Technoline

Technoline WS 7018 User manual

Technoline

Technoline WS 9040 User manual

Technoline

Technoline WS 6760 User manual

Technoline

Technoline WS 9060 User manual

Popular Weather Station manuals by other brands

Auriol

Auriol AHFL 433 A1 operating instructions

NexSens

NexSens G2-HYDROMET quick start

Hyundai

Hyundai WS 2202 instruction manual

IROX

IROX HBVR761 UV-X user manual

La Crosse Technology

La Crosse Technology C86371 instruction manual

ADE

ADE WS 1711 operating instructions

Auriol

Auriol z29592 Operation and safety notes

Auriol

Auriol 296289 Operation and safety notes

Hyundai

Hyundai WS 2266 instruction manual

La Crosse Technology

La Crosse Technology WS-2210 Operation manual

La Crosse Technology

La Crosse Technology WS-811561 manual 

Ventus

Ventus W177 owner's manual

National Geographic

National Geographic VA Colour RC instruction manual

Renkforce

Renkforce 1208067 operating instructions

Levenhuk

Levenhuk Discovery Report WA40 quick start guide

Instant Transmission

Instant Transmission MA 10410 instruction manual

Lutron Electronics

Lutron Electronics PHB-318 Operation manual

WAREMA

WAREMA EWFS Weather station eco Operating and installation instructions