Techlogix TL-DA14-HD2 User manual

User Manual

TL-DA14-HD2

1x4 HDMI Splitter & Distribution Amplifier

Version: TL-DA14-HD2_160926

TL-DA14-HD2 User Manual

www.tlnetworx.com

Preface

Read this user manual carefully before using this product. Pictures shown in this manual

are for reference only; the actual product may vary.

This manual is only for operation instruction only and not for any maintenance or repair.

Trademarks

Product model and logo are trademarked. Any other trademarks mentioned in this

manual are acknowledged as the properties of the trademark owner. No part of this

publication may be copied or reproduced without prior written consent.

FCC Statement

This equipment generates, uses and can radiate radio frequency energy and, if not

installed and used in accordance with the instructions, may cause harmful interference

to radio communications. It has been tested and found to comply with the limits for a

Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful interference in a commercial installation.

Operation of this equipment in a residential area is likely to cause interference, in which

case the user at their own expense will be required to take whatever measures may be

necessary to correct the interference.

Any changes or modifications not expressly approved by the manufacture would void

the user’s authority to operate the equipment.

TL-DA14-HD2 User Manual

www.tlnetworx.com

SAFETY PRECAUTIONS

To i ns u re pro p er op e ra t io n , please read all instructions carefully before using the device.

Save this manual for further reference.

l Unpack the equipment carefully and save the original box and packing material for

possible future shipment

l Follow basic safety precautions to reduce the risk of fire, electrical shock and injury

to persons.

l Do not dismantle the housing or modify the module. It may result in electrical shock

or burn.

l Using supplies or parts not meeting the products’ specifications may cause damage,

deterioration or malfunction.

l Refer all servicing to qualified service personnel.

l To p rev en t fi re or s ho ck ha za rd , do n o t expose the unit to rain, moisture or install this

product near water.

l Do not remove the housing of the device, as opening or removing housing may

expose you to dangerous voltage or other hazards.

l Install the device in a place with adequate ventilation to avoid damage caused by

overheating.

l Keep the device away from liquids.

l Spillage into the housing may result in fire, electrical shock, or equipment damage. If

an object or liquid falls or spills on to the housing, unplug the device immediately.

l Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to

the device before cleaning.

l Unplug the power cord when left unused for a long period of time.

l If disposing of the unit, do not burn or mix with general household waste. The device

must be disposed of per local regulations for electronic recycling.

TL-DA14-HD2 User Manual

Contents

1. Introduction ................................................................................................................. 5!

1.1 Introduction to TL-DA14-HD2 ............................................................................ 5!

1.2 Features .............................................................................................................. 5!

1.3 Package List ........................................................................................................ 5!

2. Panel Description ......................................................................................................... 6!

2.1 Front Panel ......................................................................................................... 6!

2.2 Rear Panel ........................................................... Error! Bookmark not defined.!

3. System Connection ...................................................................................................... 8!

3.1 Usage Precautions .............................................................................................. 8!

3.2 System Diagram .................................................................................................. 8!

3.3 Connection Procedures ...................................................................................... 8!

3.4 EDID Management ............................................................................................. 8!

4. Specification .............................................................................................................. 10!

4.1 Supported Input Video Formats ........................................................................ 11!

5. Panel Drawing .............................................................................................................. 1!

6. Trou bl esho ot in g & Ma in te nan c e .................................................................................. 2!

7. After-sales Service ....................................................................................................... 3!

TL-DA14-HD2 User Manual

1. Introduction

1.1 Introduction to TL-DA14-HD2

The TL-DA14-HD2 is a 1x4 splitter featuring the capability to repeat HDMI or DVI

source to two displays simultaneously. Compliant with HDMI 2.0 and HDCP 2.2, the TL-

DA14-HD2 provides comprehensive resolution capacities up to 4K@60 4:4:4 and 1080p

with 3D. It’s capable of automatically recognizing the resolution and HDCP status of the

input signal, and the HDMI signal is automatically equalized for reliable transmission

with proper EDID management.

Moreover, TL-DA14-HD2 supports convenient online update through USB port.

1.2 Features

l Four simultaneous HDMI outputs

l Supports hot-plug

l HDMI 2.0 compliant, capable of transmitting 1080p 3D & 4K@60 4:4:4 signals

l Tran sm its 1080p HDMI up to 15m

l 18 Gbps bandwidth

l HDCP compliant

l Automatically identifies input resolution

l Supports EDID management, automatically adopts the resolution of the first

detected display from ports 1 - 4

l Intuitive indicators for connection status & input HDCP encryption status

l Convenient online firmware update

1.3 Package List

l 1 x Splitter

l 2 x Mounting ears

l 4 x Screws

l 4 x Plastic cushions

l 1 x Power Adapter (DC 5V A)

l 1 x User Manual

TL-DA14-HD2 User Manual

2. Panel Description

2.1 Front Panel

No.

Name

Description

①

Power

indicator

Illuminates red when properly powered on

②

Input HDCP

compliant

Indicator

Indicates the HDCP encryption status of the input signal

Ø Iluminates green when the input signal is HDCP encrypted

Ø Blinks green when the input signal is not HDCP encrypted

Ø Remains off when there is no input signal

③

Output signal

Indicators

Illuminates green when there is an HDMI output; corresponds

to HDMI OUTPUT 1 - 4 separately

④

DC 5V

Micro USB port; connect a DC 5V power adapter for power or

plug a USB drive for firmware updates

Note: Firmware updates require auxiliary equipment; please

contact TechLogix for additional details.

⑤

OUT 1~

OUT 4

HDMI output ports. Connects to HDMI displays, automatically

capturing the input resolution.

⑥

HDMI input port. Connects with an HDMI or DVI source

device such as a DVD player or set top box.

Note: Output HDCP compliancy status depends on the input signal. When the input

signal is HDCP compliant, then output signal will be HDCP compliant and vice versa.

IN 1 2 3 4

OUT 2

OUT 1

OUT 3

OUT 4DC 5V

456

TL-DA14-HD2 User Manual

Note:

a) Pictures shown in this manual are for reference only.

b) The HDMI signal contains both a video signal and embedded audio signal (PCM,

Dolby Digital, DTS, DTS-HD), whereas a DVI signal contains solely a video signal.

c) The splitter is capable of switching input signal formats according to the displays.

For example, when the input signal is HDMI and the display can only support DVI

signal, the unit will switch the signal into DVI format.

d) EDID management automatically manages the output signal (e.g. output resolution)

to fit all displays.

TL-DA14-HD2 User Manual

3. System Connection

3.1 Usage Precautions

1) System should be installed in a clean environment that has a proper temperature and

humidity.

2) All of the power switches, plugs, sockets and power cords should be installed

properly.

3) All devices should be connected before powering on the devices.

3.2 System Diagram

The following diagram illustrates typical input and output connections that can be

utilized with TL-DA14-HD2:

3.3 Connection Procedures

Step1. Connect an HDMI or DVI source device (e.g. DVD) to the HDMI INPUT socket of

the TL-DA14-HD2 using a high-quality HDMI cable.

Step2. Connect HDMI displays to the HDMI OUTPUT sockets of TL-DA14-HD2 with

high-quality HDMI cables.

Step3. Connect the DC 5V power adapter to the power port of TL-DA14-HD2.

Note: All the ports support hot-plug. Please note that hot plugging a display may result

in screen splashing at the output ends.

OU T 2

OU T 1

OU T 3

OU T 4DC 5 V

TL-DA14-HD2 User Manual

3.4 EDID Management

TL-DA14-HD2 comprises of one HDMI input port and four HDMI output ports. EDID

management helps distribute and route signals from the source at the resolution of the

first detected display (detecting from output 1 - 4).

For example: when output 1 connects with a 1080p display, the TL-DA14-HD2 will

select 1080p as output resolution and distribute 1080p signal to displays connected to

output 1 - 4.

Note: If the displays connected to outputs 2 - 4 don’t support a 1080p signal, the display

will not show a signal.

TL-DA14-HD2 User Manual

4. Specification

I/O Connections

HDMI Input

One (1) HDMI Type A receptacle

HDMI Outputs

Four (4) HDMI Type A receptacle

Power

DC 5V 2A

Supported Video and Audio

Resolutions

480i, 480p, 576i, 576p, 720p, 1080i, 1080p,

1080p 3D, 4Kx2K (24, 25, 30, 60 Hz)

Video Compliance

HDMI 2.0, HDCP 2.2, DVI 1.0

Bandwidth

18 Gbps

Embedded Audio Compatibility

Up to PCM 5 channel, Dolby Digital TrueHD,

and DTS-HD Master Audio

Maximum Passive HDMI Distance

10m (33 ft)

Input DDC Signal

5.0 volts p-p (TTL)

Input Video Signal

0.5 ~ 1.0 volts p-p

Chassis and Environmental

Enclosure

Painted aluminum

Dimensions (W x H x D)

152.4mm x 11mm x 70.4mm (6.00in x 0.43in x

2.77in)

Shipping Weight

0.46Kg(1.00bls)

Operating Temperature

(Environment)

-10° ~ +40° C (+14° ~ +104° F)

Operating Temperature (Chassis)

45° C(113° F)

Operating Humidity (Environment)

10% ~ 90% Non-condensing

Storage Temperature

(Environment)

-15° ~ +70° C(+5° ~ +167° F)

Storage Humidity (Environment)

10% ~ 90% Non-condensing

Table of contents

Other Techlogix Media Converter manuals

Techlogix

Techlogix TL-DA12-HD2 User manual

Techlogix

Techlogix TL-C-HDCP User manual

Techlogix

Techlogix HomPro HP-ACVT-DA2 User manual

Techlogix

Techlogix TL-AD-HD User manual

Popular Media Converter manuals by other brands

SoundTraxx

SoundTraxx Blunami BLU-2200 user guide

SPROLINK

SPROLINK VA1 user manual

Acclaim Lighting

Acclaim Lighting DDC-1-AC user guide

Nikon

Nikon AF-S TC-20E III user manual

Axis

Axis AXIS Q7406 user manual

Omega

Omega TAC80B-J instruction sheet

Zoom

Zoom Thunderbolt TAC-2R Operation manual

OST

OST iConverter 10/100M quick start guide

Vertiv

Vertiv Netsure user manual

birddog

birddog MINI user guide

Roland

Roland GI-10 owner's manual

Wallenstein

Wallenstein WX310 Operator's manual

Pace

Pace MSS 200-1 Service manual

Solar Converters

Solar Converters EQ 12/24-50 manual

CYP

CYP EL-7400V Operation manual

TIE

TIE MIDI 1i1o user manual

DCS

DCS Vivaldi Upsampler user manual

Westermo

Westermo MCW-211 SERIES user guide