Teac SL-D910 User manual
ENGLISH FRANÇAIS DEUTSCH
NEDERLANDS
046-SD910010-R
SL-D910
CD Clock Radio
Z
OWNER’S MANUAL
MANUEL DU PROPRIÉTAIRE
BEDIENUNGSANLEITUNG
GEBRUIKSAANWIJZING
2
The lightning flash with arrowhead symbol,
within an equilateral triangle, is intended to
alert the user to the presence of uninsulated
“dangerous voltage” within the product’s
enclosure that may be of sufficient magnitude
to constitute a risk of electric shock to
persons.
The exclamation point within an equilateral
triangle is intended to alert the user to the
presence of important operating and
maintenance (servicing) instructions in the
literature accompanying the appliance.
IMPORTANT SAFETY
INSTRUCTIONS
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
7) Do not block any ventilation openings. Install in
accordance with the manufacturer’s instructions.
8) Do not install near any heat sources such as radiators,
heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.
9) Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two
blades with one wider than the other. A grounding
type plug has two blades and a third grounding
prong. The wide blade or the third prong are
provided for your safety. If the provided plug does
not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
10)Protect the power cord from being walked on or
pinched particularly at plugs, convenience
receptacles, and the point where they exit from the
apparatus.
11) Only use attachments/accessories specified by the
manufacturer.
12)Use only with the cart, stand,
tripod, bracket, or table specified
by the manufacturer, or sold with
the apparatus. When a cart is
used, use caution when moving
the cart/apparatus combination to
avoid injury from tip-over.
13)Unplug this apparatus during lightning storms or
when unused for long periods of time.
14) Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or
plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has
been exposed to rain or moisture, does not operate
normally, or has been dropped.
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER (OR BACK). NO
USER-SERVICEABLE PARTS INSIDE. REFER SERVICING
TO QUALIFIED SERVICE PERSONNEL.
ENGLISH
3
CAUTION
<DO NOT REMOVE THE EXTERNAL CASES OR
CABINETS TO EXPOSE THE ELECTRONICS. NO USER
SERVICEABLE PARTS ARE WITHIN!
<IF YOU ARE EXPERIENCING PROBLEMS WITH THIS
PRODUCT, CONTACT TEAC FOR A SERVICE
REFERRAL. DO NOT USE THE PRODUCT UNTIL IT HAS
BEEN REPAIRED.
<USE OF CONTROLS OR ADJUSTMENTS OR
PERFORMANCE OF PROCEDURES OTHER THAN
THOSE SPECIFIED HEREIN MAY RESULT IN
HAZARDOUS RADIATION EXPOSURE.
WARNING: TO PREVENT FIRE OR SHOCK
HAZARD, DO NOT EXPOSE THIS
APPLIANCE TO RAIN OR MOISTURE.
<Do not expose this apparatus to drips or splashes.
<Do not place any objects filled with liquids, such as
vases, on the apparatus.
<Do not install this apparatus in a confined space such
as a book case or similar unit.
<The apparatus draws nominal non-operating power
from the AC outlet with its STANDBY/ON switch in
the standby position.
<The apparatus should be located close enough to the
AC outlet so that you can easily grasp the power cord
plug at any time.
<An apparatus with Class
!
construction shall be
connected to an AC outlet with a protective
grounding connection.
<Batteries (battery pack or batteries installed) shall not
be exposed to excessive heat such as sunshine, fire or
the like.
<Excessive sound pressure from earphones and
headphones can cause hearing loss.
4
Contents
Thank you for choosing TEAC. Read this manual
carefully to get the best performance from this
unit.
IMPORTANT SAFETY INSTRUCTIONS..............................2
Contents .......................................................................4
Before Use ....................................................................4
Discs .............................................................................6
RESET Switch.................................................................7
Connection ...................................................................8
Names of Each Control................................................10
Remote Control Unit ...................................................13
Basic Operation ...........................................................14
Listening to CD/MP3 (disc)...........................................15
Listening to MP3 (USB) ................................................16
Listening to CD/MP3 (disc/USB) ...................................16
Programmed Playback .................................................18
Repeat/Shuffle Playback ..............................................20
Listening to the Radio..................................................21
Preset Tuning ..............................................................22
RDS.............................................................................23
RDS (PTY Search).........................................................23
Listening to an External Source....................................24
Setting the Clock.........................................................25
Setting the Timer.........................................................26
Specifications ..............................................................28
Troubleshooting ..........................................................29
Read this before operation
<As the unit may become warm during operation,
always leave sufficient space around the unit for
ventilation.
<The voltage supplied to the unit should match the
voltage as printed on the rear panel. If you are in any
doubt regarding this matter, consult an electrician.
<Choose the installation location of your unit carefully.
Avoid placing it in direct sunlight or close to a source
of heat. Also avoid locations subject to vibrations and
excessive dust, heat, cold or moisture.
<Do not place the unit on an amplifier/receiver.
<Do not open the cabinet as this might result in
damage to the circuitry or electrical shock. If a foreign
object should get into the set, contact your dealer or
service agency.
<When removing the power plug from the wall outlet,
always pull directly on the plug, never yank the cord.
<To keep the laser pickup clean, do not touch it, and
do not forget to close the disc tray when not using
the CD player.
<Do not attempt to clean the unit with chemical
solvents as this might damage the finish. Use a clean,
dry cloth.
<Keep this manual in a safe place for future reference.
DO NOT MOVE THE UNIT DURING PLAYBACK
During playback, the disc rotates at high speed. Do
NOT lift or move the unit during playback. Doing so
may damage the disc.
WHEN MOVING THIS UNIT
When changing places of installation or packing the
unit for moving, be sure to remove the disc and
return the disc table to its original position in the
player. Then, press the power switch to turn the
power off, and disconnect the power cord. Moving
this unit with the disc loaded may result in damage to
this unit.
Before Use
ENGLISH
5
Maintenance
If the surface of the unit gets dirty, wipe with a soft
cloth or use diluted neutral cleaning liquid. Be sure to
remove any fluid completely. Do not use thinner,
benzine or alcohol as they may damage the surface of
the unit.
Beware of condensation
When the unit (or a disc) is moved from a cold to a
warm place, or used after a sudden temperature
change, there is a danger of condensation; vapor in
the air could condense on the internal mechanism,
making correct operation impossible. To prevent this,
or if this occurs, leave the unit for one or two hours
with the power turned on. The unit will stabilize at
the temperature of its surroundings.
Disposal of your old appliance
1. When this crossed-out wheeled bin
symbol is attached to a product it
means the product is covered by the
European Directive 2002/96/EC.
2. All electrical and electronic products
should be disposed of separately from the
municipal waste stream via designated collection
facilities appointed by the government or the local
authorities.
3. The correct disposal of your old appliance will help
prevent potential negative consequences for the
environment and human health.
4.For more detailed information about disposal of
your old appliance, please contact your city office,
waste disposal service or the shop where you
purchased the product.
6
<Never use such chemicals as record sprays, antistatic
sprays or fluid, benzene or thinner to clean the discs.
Such chemicals will do irreparable damage to the
disc’s plastic surface.
<Discs should be returned to their cases after use to
avoid dust and scratches that could cause the laser
pickup to “skip”.
<Do not expose discs to direct sunlight or high
humidity and temperature for extended periods. Long
exposure to high temperatures will warp the disc.
<CD-R/CD-RW discs are more sensitive to the effects of
heat and ultraviolet rays than ordinary CDs. It is
important that they are not stored in a location where
direct sunlight will fall on them and which is away
from sources of heat such as radiators or heat-
generating electrical devices.
<Printable CD-R/CD-RW discs aren’t recommended, as
the label side might be sticky and damage the unit.
<Do not stick papers or protective sheets on the discs
and do not use any protective coating spray.
<Use a soft oil-based felt-tipped pen to write the
information on the label side. Never use a ball-point
or hard-tipped pen, as this may cause damage to the
recorded side.
<Never use a stabilizer. Using commercially available
CD stabilizers with this unit will damage the
mechanisms and cause them to malfunction.
<Do not use irregular shape CDs (octagonal, heart-
shape, etc.). CDs of this sort can damage the unit.
<If you are in any doubt as to the care and handling of
a CD-R/CD-RW disc, read the precautions supplied
with the disc, or contact the disc manufacturer
directly.
Discs
Discs that can be played on this unit:
• Commercial audio CD’s bearing the “Compact Disc
Digital Audio” logo:
• Properly finalized CD-R/CD-RW discs.
Note:
<Depending on the quality of the disc and/or the
condition of the recording, some CD-R discs may not
be playable.
<Copy-protected discs and other discs which do not
conform to the CD standard may not play back
correctly in this player.
If you use such discs in this unit, TEAC Corporation
and its subsidiaries cannot be responsible for any
consequences or guarantee the quality of
reproduction. If you experience problems with such
non-standard discs, you should contact the producers
of the disc.
<Always load the disc with the label side up. (Compact
discs can be played or recorded only on one side.)
<To remove a disc from its storage case, press down
on the center of the case and lift the disc out, holding
it carefully by the edges.
How to remove the disc How to hold the disc
<Should the disc become dirty, wipe the surface
radially with a soft, dry cloth. Never clean the disc
using a circular motion.
ENGLISH
7
MP3 compatibility
<This unit can play MP3 files recorded on a CD-R, CD-
RW or USB memory card.
<File names of MP3 should be alphanumeric characters.
This unit cannot display symbols and full-size or 2
bytes-wide characters (such as Japanese, Chinese,
etc.) correctly. Also, be sure to use the file extension
“.mp3”.
<The disc must be finalized in order to play.
<The CD-ROM must be ISO 9660 compatible.
<When more than 200 files or folders are recorded on
the disc, the unit might not be able to play it correctly.
<Mono or stereo MPEG-1 Audio Layer 3 format, 44.1
or 48 kHz, fixed bit-rate.
<Audio encoded at 128 Kbps should sound close to
regular audio CD quality. Although this player will play
lower bit-rate MP3 tracks, the sound quality becomes
noticeably worse at lower bit-rates.
RESET Switch
In the following cases, function buttons may not work
properly.
<When the system is damaged by some electrical
shock.
<When the power is irregular or has electrical noise.
In these cases, press the RESET switch once or twice
lightly with a pencil or a ball-point pen.
8
CAUTION
<Switch off the power before making connections.
<Read the instructions of each component you intend
to use with this unit.
<Be sure to insert each plug securely. To prevent hum
and noise, do not bundle the connection cords.
Connection
C
D
AB
E F
123
ENGLISH
9
PHONES
For private listening, connect the headphones plug
into this jack, and adjust the volume using the
VOLUME knob.
USB connector
This connector is for connecting your USB memory
card containing MP3 music.
AUX IN jack
You can connect a portable audio player to this jack.
Connect to the LINE OUT or PHONES jack (audio
output jack) of the player using a commercially
available stereo mini plug cable.
When using the PHONES jack of your mini player,
you must adjust the volume of the mini player or
you may hear no sound from your SL-D910.
<Turning the volume of the mini player up too high
may cause the sound from your SL-D910 to be
distorted. In this case, reduce the volume of the mini
player until the distortion stops and then adjust the
volume level of the SL-D910 to a comfortable
listening level.
FM antenna
Extend fully and position for the best reception.
Keep antenna away from metallic objects, electrical
equipment and cords.
AC power cord
Plug this AC power cord into an AC outlet.
E
D
C
B
A
Battery compartment
The battery supplies a backup power to the built-in
clock and memory, when the unit is momentarily
disconnected from the AC outlet.
Battery installation
1.Loosen the fixing screw.
2.Push the other end of the compartment cover to
open it.
3.Insert a CR2032 lithium-ion battery with it’s positive
+face facing inner side.
4.Close the cover.
Battery replacement
If the clock comes to indicate the wrong time,
replace the battery with a new one.
Precautions concerning button-shaped battery
<Be sure to insert the battery with correct positive
“+” and negative “_” polarities.
<Do not heat or disassemble battery and never
dispose of old battery by throwing them in a fire.
F
10
Names of Each Control 1
A
B
C D F G HE
T
L L
S R Q
R
P O N
M
JI K
F
N
S
T
O
D
K
J
H
M
C
TOP
FRONT
REMOTE CONTROL
Other manuals for SL-D910
1
Table of contents
Languages:
Other Teac Clock Radio manuals
