TCO T6 User manual
WIRELESS EARPHONE
TCO T6
– 2 –
EN
To avoid hearing damage, limit the me you use earphones at high
volume and set the volume to a safe level. The louder the volume,
the shorter the safe listening me is.
Be sure to observe the following guidelines when you are using
your earphones.
• Listen to reasonable volumes for reasonable periods.
• Be careful to do not adjust the volume connuously upwards
as your hearing adapts.
• Do not turn up the volume so high that you can’t hear what’s
around you.
•
You should use cauon or temporarily disconnue use in
potenally hazardous situaons.
•
Excessive sound pressure from earphones and earphones can
cause hearing loss.
•
It is prohibited “to wear any system such as headphones,
earpieces, headphones...that may limit both the aenon and
the hearing of drivers”. Drivers who call at the wheel using this
type of equipment can, therefore, be penalized.
To prevent possible hearing damage, do not listen at
high volume levels for long periods.
– 3 –
EN
Infant Safety:
• This product contains small parts and is NOT a toy. Keep this
product and its accessories out of reach of children. Do not
let children, toddlers and pets play with or handle this product
avoiding the risk of serious injury, choking, strangulaon or death.
Baery Safety:
•
Do not expose earphones and the integrated baery to
excessive heat, re or the like.
• Do not drop your earphones.
• Do not allow your earphones to be submerged in water.
• The danger of explosion if the baery is incorrectly replaced.
Replace only with the same or equivalent type.
Medical Device Safety:
•
This product contains components and radios that emit
electromagnec elds. These electromagnec elds and
magnets may interfere with pacemakers, cardioverters,
debrillators, insulin pumps or other electro-medical devices.
Consult your physician and medical device manufacturer
if you suspect this product is interfering with your medical device.
Hereby, TCO SOURCING ASIA PTE. LTD. declare that the radio
equipment type Earphones T6 is in compliance with Direcve
2014/53/EU. The full text of the EU declaraon of conformity is
available at the following internet address:
hp://www.the-china-oce.com/brandme-collecon/5-t6-earphones.
EN
Thank you for using KS- T6 TWS earphones T6, we hope you enjoy them!
For the rst use, please fully charge the charging case and the
Earphones T6 before use.
2. Product parts descripon:
Put the earphones T6 in the charging case, it will be charged
automacally:
- The light indicator will turn o aer 3 seconds
- When it is fully charged, the light indicator will go o aer
3 seconds.
Charging port--Type-C USB charger interface
– 4 –
Charging box
Touch buon Right earphone
Microphone
Le earphone
Green charging light
indicators
EN
– 5 –
3. Operang instrucons:
3.1 Baery Charging case
The baery of the charging case uses the DC5V-1A Type-C USB
charging cable to charge the charging case. When it is charged,
the green indicator light will ash to show the power bars. When
full four bars and the light no longer ashes, it means that it is fully
charged. Fieen seconds aer removing the charging cable, the
indicator goes o. To have good visibility of the green charging light
indicators, look at them in a dark place and not directly in the sunlight.
3.2 Earphone charging
First, put the earphones T6 into the charging case. The green light
indicators indicate the baery level of the charging case. The green
light indicators indicate that the earphones are being charged.
When the green light indicators are o, mean the earphones are
fully charged.
The baery level indicaon of the earphones depends on your device.
For IOS devices the indicaon is accurate; for Android devices, it
could be there is no indicaon or an indicaon with a variance.
3.3 Earphone pairing method:
a. For the rst connecon: Take out the two earphones T6 from
the charging case.
b. Turn on the Bluetooth on your phone or other devices, search
for T6 and click on connect.
– 6 –
EN
For the second connecon, turn on the Bluetooth switch of the
device such as a mobile phone and take out the le and right
earphones T6 or any of the earphones T6 from the charging case
then the earphones T6 will be automacally connected to the
last used device.
* Note: If the earphones T6 are not paired with the device aer
ve minutes, it will automacally switch to the shutdown mode.
3.4 Shut down and restart the earphones
- To shut down the earphones: Press and hold for 5 seconds
near the top of the earphone.
- To restart the earphones: Press and hold for 3 seconds on the
top of both earphones.
4. How to use the earphones T6 properly
Proper way of wearing the earphones:
You have to place the earphone with the “L” symbol in your le
ear and the earphone with the “R” symbol in your right ear. For a
beer listening experience, adjust them so they are comfortable
in your ears. When worn properly, the earphones T6 should feel
secure in your ears.
When the baery will reach the lowest baery level you will hear a
“Baery low” message. From this moment you will have 15 minutes
before the earphones shut down automacally.
– 7 –
EN
5. One-click operaon:
5.1 Music Mode
Funcon Acon
Pause / play Click any earphone
Next song Double click right earphones
Previous song Double click le earphones
5.2 Call mode
Funcon Acon
Answering a call Click any earphone
Rejecng a call Press and hold any earphone for 2
seconds
Hanging up Click on any earphone
* Triple-tap any earphone to enter voice assistant mode
– 8 –
EN
6. FAQ’s
6.1 Why can’t my phone nd the earphones?
a. Make sure the earphones T6 are charged enough and repeat
the operaon as seen in 3.2
b. Make sure the earphones T6 are not connected to another
Bluetooth device.
6.2 Why are the earphones T6 and my mobile phone disconnected
and noisy?
a. The earphones T6 don’t have enough baery. In this case,
charge the earphones T6 as soon as possible.
b. There are obstacles between the device and the earphones, or
other electrical signals may be interfering. In this case, please
keep the earphones T6 close to your phone and unobstructed
c. The eecve working range of the earphones T6 and equipment
can generally reach 10-15 meters. Generally speaking, there
should be no obstacles in between, to give the best results.
There may be noise and disconnecon beyond the distance.
– 9 –
EN
6.3 Why can’t my earphones T6 perform the pause, resume, up
and down song control funcons during while music is playing?
This funcon requires the device to support the AVRCP (Audio
/ Video Remote Control Prole) protocol. If the device does not
support that AVRCP, the protocol cannot be used. For Android
devices, you need to click on the media audio switch within the
currently connected device opons.
6.4 Why is only one earphone connected to Bluetooth and
operaonal?
a. The other earphone is out of power. In this case please put the
non-working earphone back in the charging case to recharge
it and reconnect it once it is charged.
b. There is interference in pairing the le and right earphone.
Please put them back together in the charging case and take
them out again.
6.5 Why when the earphones T6 are placed in the charging case,
the Bluetooth device is sll connected?
If the charging case is out of power, the earphones T6 cannot be
turned o automacally. Please charge the charging case or turn
the earphones T6 o manually.
– 10 –
EN
7. Product Parameters
Bluetooth version 5.0 Frequency
range
20-20.000Hz
Support formats SBC Playing me 5H / 60%
volume
Transming
power Class II
≥10M Standby me 60H
Frequency
respond 20-20KHZ Earphone
charging me 1.5H
Earphone baery 45mAh Case charging
me 2H
Charging case
baery 400mAh Charging
voltage/
current
Type-C USB
5V/1A
Sensivity 108dB±3db
@1KHZ Discharging
voltage/
current
5V/400mA
Speaker diameter/
impedance 13mm/32Ω Earphone
weight 4.5g±1g/ per
earphone
Support protocol HFP1.7 HSP1.2 A2DP1.3 AVRCP1.6 SPP1.2
PBAP1.0
Table of contents
Languages:
