TCL MOVEAUDIO S150 User manual
Hi! Let’s get started.
MOVEAUDIO S150
User manual
Contents
1 Important safety instructions 3
Hearing Safety
General safety information
2 Welcome 4
What’s in the box
Overview of the truly wireless earphones
3 Charge 5
Charge the battery
4 Connect your earphones 6
Pair the earphones with your smartphone or Bluetooth®devices at the first time
Pair the earphones with a new Bluetooth®device
5 Use your earphones 7
Wear the earphones
Power your earphones on or off
Reconnect your earphones to your smartphone or Bluetooth®device
Switch the earphone between stereo and mono modes
Music control
Voice assistant
Call control
Reset the earphones
6 Notice 10
Compliance notice
Declaration of conformity
Remove the integrated battery
Disposal of your old product and battery
7 Notice for US and Canada 11
Compliance notice for US
Compliance notice for Canada
8 Trademarks 12
9 FAQ 13
3
1 Important safety
instructions
Hearing Safety
Danger
To avoid hearing damage, limit the time you use
earphones at high volume and set the volume to a
safe level. The louder the volume, the shorter the safe
listening time is.
To prevent accidents and damage to ears:
• Listen at reasonable volumes for reasonable periods of
time.
• Be careful not to adjust the volume continuously upwards
as your hearing adapts.
• Do not turn up the volume so high that you can’t hear
what’s around you.
General safety information
To prevent damage and malfunctions:
• Do not expose earphones to excessive heat.
• Do not drop your earphones.
• The earphones are resistant to dripping and splashing
water. The charging case is not waterproof. Before putting
the earphones into the charging case, thoroughly wipe off
any moisture.
• Do not submerge your earphones in water.
• Do not use any cleaning agents containing alcohol,
ammonia, benzene, or abrasives.
• If cleaning is required, use a soft cloth, if necessary
dampened with a minimum amount of water or diluted
mild soap, to clean the product.
Battery precautions:
• The integrated battery shall not be exposed to excessive
heat such as sunshine, fire or the like.
Caution:
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type.
Operating temperature and humidity:
• Operate or store in a place where temperature is between
0ºC (32ºF) to 45ºC (113ºF) (up to 90% relative humidity
with no condensation).
• Battery life may be shorter in high or low temperature
conditions.
Charging temperature
Charging with the charging case when temperature is
between 0ºC (32ºF) to 45ºC (113ºF)
Medical device
The earphones and charging case contain magnets. The
American Heart Association (US) and the Medicines and
Healthcare Products Regulatory Agency (UK) both warn that
magnets can affect the operation of implanted pacemakers,
cardioverters, defibrillators, insulin pumps or other electro
medical devices (collectively, "Medical Device") within the
range of 15 cm (6 inches). If you are a user of any of these
Medical Devices, DO NOT USE THIS EARPHONES AND
CHARGING CASE UNLESS YOU HAVE CONSULTED WITH
YOUR PHYSICIAN.
Liability:
• This product is designed for use with mobile devices that
support Bluetooth®standard specified by Bluetooth®SIG,
Inc. and are compatible to the following Bluetooth®profile:
Bluetooth®profile
• HFP - Hands-free profile
• A2DP - Advanced audio distribution profile (Bluetooth®
stereo supported)
• AVRCP - Audio video remote control profile
• It is considered improper use when this product is used
for any application not named in this user manual.
• TCL Corporation bears no responsibility for accidents or
damage caused by improper use of this product.
Caution:
The user is cautioned that changes or modifications not
expressly approved by the party responsible for compliance
4
2 Welcome
Congratulations on the purchase of your new TCL
earphones! After it is set up and connected, you can enjoy
wireless music and phone calls with high quality sound. You
are recommended to read through this user manual which
helps you set up, connect and operate the product easily
and properly. For more information, visit www.tcl.com.
Let’s get started.
What’s in the box
TCL truly wireless
earphones
MOVEAUDIO S150
USB cable (for charging)
QSG Safety
sheet
Quick start guide Safety sheet
Overview of the truly wireless
earphones
4
2
3
1
6
3
-
5
1 Charging case
2 Charging case LED indicators
3 USB Type-C charging slot
4 LED indicators
5 Multi-function buttons
(Music control/call control/voice assistant)
6 Microphone
5
3 Charge
Charge the battery
Charging case
Connect the supplied USB charging cable to:
• The USB Type-C charging slot on the charging case and;
• The USB AC adapter.
The LED indicator at the front of the charging case start
flashing. It become solid when charging is complete.
Note
• For first time use, charge the battery for 5 hours for
optimum battery capacity and lifetime.
• After the first time charge, a normal charge takes
approximately 2 hours.
• Use only the supplied USB charging cable for charging to
prevent product damage.
• If the LED indicator at the front of the charging case keep
flashing, it means the charging case is in protection mode.
Charging will stop. In this case, unplug the USB Type-C
cable and plug it back and charge the battery again.
Replace the USB Type-C cable if the problem persists.
Warning
Only charge with certified USB adaptor DC 5V capable of
0.5A output current or more.
Earphones
Place the earphones in the charging case.
The earphones will start charging automatically.
The LED indicator will turn on.
When charging is complete, the LED indicator will turn
off.
You can charge the earphones in the charging case using
the USB Type-C cable.
6
4 Connect your
earphones
Before you can make calls and enjoy music with your
earphones, follow the instructions below to set up and
connect your earphones.
Pair the earphones with your
smartphone or Bluetooth®
devices at the first time
For the first time use, you have to pair the earphones with
your smartphone.
1 Remove the earphones from the charging case.
The earphones will turn on automatically and you will
hear a voice notification.
The LED indicators on both earphones will flash.
Both earphones will connect with each other and you
will hear a voice notification.
The earphones enter pairing mode and you will hear
a voice notification. The LED indicator on the right
earphone will flash.
The earphones are now ready to pair with your
smartphone/Bluetooth device.
2 Turn on the Bluetooth®function of your smartphone.
3 Select TCL MOVEAUDIO S150. Enter ‘0000’ if the
earphones password is required.
You will hear a voice prompt when pairing is
successful.
TCL MOVEAUDIO S150
-
3
Pair the earphones with a new
Bluetooth®device
Auto pairing
1 Make sure the Bluetooth function of the previous
connected device is turned off. You can also disconnect it
from the previous connected device manually.
2 Follow the steps in 'Pair the earphones with your
smartphone or Bluetooth®devices at the first time'.
Manual pairing
1 When the earphones are on, press the multifunction
button on the right earphone for 5 seconds.
The earphones will enter pairing mode. You will hear
a voice notification, and the LED indicator on the right
earphone will flash.
2 Turn on the Bluetooth®function of your smartphone.
3 Select TCL MOVEAUDIO S150. Enter ‘0000’ if the
earphones password is required.
You will hear a voice prompt when pairing is
successful.
Note
• The earphones can save up to 10 different devices you
have connected. If you connect to more than 10 devices,
the earliest connected device is replaced by the last
connected one.
• Make sure your smartphone or device has Bluetooth®
capability and is compatible to the earphones (see
'Bluetooth®profile' on page 3).
7
5 Use your
earphones
You can now enjoy wireless music and make your phone
calls with your earphones.
Wear the earphones
See the following instructions to wear the earphones
properly.
1. 2.
Power your earphones on or
off
• To power on your earphones, you can either remove the
earphones from the charging case or press and hold the
multi-function buttons on both earphones simultaneously
for 2 seconds.
• To power off your earphones, you can either put the
earphones back to the charging case or press and
hold the multi-function buttons on both earphones
simultaneously for 8 seconds.
Reconnect your earphones
to your smartphone or
Bluetooth®device
1 Turn on your smartphone or Bluetooth®device.
2 Turn on your earphones.
The earphones are reconnected to the last connected
smartphone/Bluetooth®device automatically.
Note
• You are recommended to turn on the smartphone/
Bluetooth®device or activate the Bluetooth®feature
before turning on the earphones. Otherwise, you have
to reconnect the earphones and smartphone/Bluetooth®
device manually.
TCL MOVEAUDIO S150
-
3
• If the earphones fail to connect to any Bluetooth®
device within 5 minutes, the earphones will switch off
automatically to save the battery life.
8
Switch the earphone between
stereo and mono modes
Note
Only the right earphone can be used in mono mode.
1 If both earphones are placed in the charging case, remove
the right earphone from the charge case.
The right earphone will turn on and connect to the
smartphone/Bluetooth device automatically.
TCL MOVEAUDIO S150
3
The right earphones can now be operated in mono
mode.
3
Mono mode
2 To switch the earphones back to stereo mode, simply
remove the left earphone from the charging case.
Both earphones will reconnect with each other.
3
-
Stereo mode
3 To switch the earphones back to mono mode, simply put
the left earphone in the charging case.
The right earphone will be operated under mono mode.
Music control
Music control Operation (multi-function button)
Play or pause Press twice
3
Skip forward* Press and hold for 2 seconds
3
Skip backward* Press and hold for 2 seconds
-
* Operation is not available in mono mode.
Voice assistant
Phone voice commands enable you to speak to Siri®
or Google Assistant™ on your smartphone using your
earphones. For more information on using Siri®or Google
Assistant™, consult the user manual of your smartphone
or Bluetooth®device.
Press the multi-function button on the left earphone
for 2 times to activate Siri®or Google Assistant™.
You will hear the start-up sound. Make a request to
Siri®or Google Assistant™ through the earphones'
microphone.
9
Call control
Call control Operation (multi-function buttons)
Pick up or hang up
a call
Press twice
-
/
3
Reject an incoming
call
Press and hold for 2 seconds
-
/
3
*Operation is not available in mono mode.
Reset the earphones
If you have to reset your earphones due to the connection
or pairing issues, see the following steps.
1 Remove 'TCL MOVEAUDIO S150' from the Bluetooth
list of your smartphone. Turn off the Bluetooth function of
your device.
TCL MOVEAUDIO S150
×
2 Remove both earphones from the charging case.
3 Long press one side button up to 6 seconds to turn off
one earphones, and then repeat on the other earphone.
You can press both button to turn them off
simultaneously or turn them off separately.
00:06
4 Press the button on each of the earphones, you will hear
a voice notification and the LED flashes.
You can do the operation separately. It’s best to do
this at the same time to help them find each other.
Tip: Pay attention to the voice notifications.
5 Wait for a few seconds, two side earphones will connect.
The LED indicator on the earphones will keep flashes in
1 minutes. The earphone is in pairing mode.
6 You can now connect the earphones to your device or
put the earphones back to the charging case to turn them
off.
10
6 Notice
Compliance notice
EMF
This product complies with all applicable standards and
regulations regarding exposure to electromagnetic fields.
Declaration of conformity
Hereby, TCL Communication Ltd. declares that this product
is in compliance with the essential requirements and other
relevant provisions of Directive 2014/53/EU. You can find
the Declaration of Conformity on www.tcl.com
Remove the integrated battery
Check your country's local waste regulations for the proper
disposal of electronic products. To protect the environment,
remove and recycle the headphone battery before disposing
of them.
For your safety, contact an authorized service center to
remove the battery. If the battery is not properly removed, it
may lead to damage to the battery, and/or cause personal
injury.
battery battery
Lithium polymer battery
(Charging case: 500mAh; Earphones: 40mAh)
Disposal of your old product
and battery
Environmental protection and sustainability
We have omitted all unnecessary packaging and make sure
it is eco-friendly and sustainable.
Your product is designed and manufactured with
high quality materials and components, which can
be recycled and reused. Please observe the local
regulations regarding the disposal of packaging
materials, exhausted batteries and old equipment.
For recycling information, please visit www.tcl.com
This symbol on a product means that the product
is covered by European Directive 2012/19/EU.
This symbol means that the product contains a
built-in rechargeable battery covered by European
Directive 2013/56/EU which cannot be disposed of
with normal household waste. We strongly advise
you to take your product to an official collection
point.
Table of contents
Other TCL Headphones manuals
TCL
TCL MOVEAUDIO S600 User manual
TCL
TCL MOVEAUDIO Neo User manual
TCL
TCL MOVEAUDIO S600 User manual
TCL
TCL SOCL200BT User manual
TCL
TCL MOVEAUDIO S180 User manual
TCL
TCL MTRO200BT User manual
TCL
TCL SOCL100BT User manual
TCL
TCL MOVEAUDIO S200 User manual
TCL
TCL MTRO200NC User manual
TCL
TCL ACTV100BT User manual
