TC Electronic M-ONE User manual
%rel.rel.
MIX EFFECT BAL.IN LEVEL
LEVELS MULTI SPECTRAL LCD DISPLAY
POWER 0
O
3
6
12
18
24
40
INPUT
MORE
-dB
L
R
44.1KHz
48KHz
Digital IN PARALLEL
LOCK
DUAL SEND/RET
STEREO LINKED
DUAL MONO
SERIAL
ANALOG
DIGITAL
EDITED FACTORY USER MIDI IN
The M-ONE Hall
1
DUAL EFFECTS PROCESSOR
MONE
DUAL EFFECTS PROCESSOR
by
TC ELECTRONIC
QUICK GUIDE TO THE
ENGLISH - GERMAN - SPANISH - ITALIAN - FRENCH - JAPANESE
For complete manuals in German, Spanish, Italian and French please refer to our website at:
www.tcelectronic.com
2
QUICK GUIDE
% rel.rel.
MIX EFFECT BAL.IN LEVEL
LEVELS MULTI SPECTRAL LCD DISPLAY
POWER 0
O
3
6
12
18
24
40
INPUT
MORE
-dB
L
R
44.1KHz
48KHz
Digital IN PARALLEL
LOCK
DUAL SEND/RET
STEREO LINKED
DUAL MONO
SERIAL
ANALOG
DIGITAL
EDITED FACTORY USER MIDI IN
The M-ONE Hall
1
DUAL EFFECTS PROCESSOR
POWER button
Power on/off.
IN LEVEL nob
Adjusts the Input level.
MIX nob
Adjusts the lobal mix between
dry and wet si nal.
Fully clockwise is 100% effect.
EFFECT BAL nob
Adjusts the balance between the
two En ines.
INPUT Meters
The Peak meter shows the Input
level of left/ri ht channels.
The meter ran e is:
0, -3, -6 ,-12, -18, -24, -40.
OVERLOAD LEDs
The OVERLOAD LEDs indicate
one of two situations:
- The Input level is too hot and
therefore overloadin .
- There is an internal DSP
overflow.
The Overload LED is lit when
1 sample is @ 0dBFS.
ANALOG/DIGITAL LED
ANALOG/DIGITAL indicator
states the selected Input.
Input type is selected in the
"I/O Setup" menu.
SAMPLE RATE indicator
The SAMPLE RATE indica-
tor shows the clock source
and the incomin master
clock. The icon Di ital In
will be blinkin if no clock or
unacceptable clock is found.
ROUTING indicator
Indication of what Routin
mode the MONE currently is
usin .
ALGO Indicator
Shows the currently used
al orithms in each of the two
En ines.
DYNAMIC meters 1+2
These two meters show the
ain reduction when an
En ine is runnin Dynamic
al orithms.
The Dynamic al orithms are:
Compressor, Limiter, Gate,
Expander and De-esser.
DISPLAY
Displays the preset number
and the preset type:
Factory or User.
EDITED icon
This icon will be lit as soon as
the current recalled preset
has been modified.
FACTORY/USER icon
Shows whether you are
operatin in the Factory or
the User bank.
MIDI IN icon
Shows any incomin
MIDI information.
Revision 1 - SW 1.01
Prod. No: E60500201
3
QUICK GUIDE
I/O RECALL
BYPASS 2
TAP UTILITY STORE EXIT
EFFECTS PROGRAMSETUP CONTROL
ENTER
BYPASS 1
ROUTING ALGO |EDIT ALGO |EDIT
ROUTING ey
Press the ROUTING key to set
the En ine Routin .
The options are: Dual Send /Ret,
Parallel, Parallel/Serial, Serial,
Stereo, Dual Mono.
I/O SETUP
Basic parameters are set here.
- Input source - Analo /Di ital.
- Sample Rate - 44.1/48kHz/DI.
- Bypass Mode - See Bypass
keys 1 and 2.
- Global Output level.
- Input level sensitivity:
Consumer (-10dBu) or
professional (+4 dBu).
- Dither 16, 20 or 24(off).
TAP ey
Tap this key to enter lobal Tap
tempo and to enter the Tap menu.
Subdivision of the tapped tempo
is setup in this menu. The tapped
tempo can be used for Delay
time, Chorus rate etc.
UTILITY
MIDI, SysEx-ID, Routin -lock,
Bypass mode and Pedal function.
STORE ey
Selects the Store menu. Presets
can be stored in the User bank
only. Location is selected usin
the CONTROL wheel. Operation
is confirmed usin ENTER.
CURSOR UP/DOWN
Use the cursors to move around
in the display.
ENTER ey
Confirms operations. The ENTER
key LED will indicate when this
key can be used.
EXIT ey
Is used to exit a menu or to
disapprove an action.
CONTROL wheel
Is used to chan e values.
ALGO/EDIT 1+2
Press this key to enter the Edit
display and the Al orithm Chan e
display of the currently selected
En ine.
BYPASS eys 1 and 2
The Bypass mode is set up in
Utility. There are three different
Bypass modes:
1 0% Mix:
The Input si nal is passed
directly to the Output.
2 Fx Input:
Cuts only the En ine Input in
order to let the effect "rin out",
but will still leave the same
amount of dry si nal comin
throu h.
3 Fx Output:
Cuts only the En ine Output in
order to kill the Fx instanta-
neously, but leaves the same
amount of dry si nal comin
throu h.
RECALL ey
Selects the Recall menu.
Select a desired preset usin the
CONTROL wheel and press the
ENTER key to enter/load the
selected preset.
4
QUICK GUIDE
Setting up the MONE
This explains a couple of the most commonly used setups:
M•ONE
MIXER
L
1R2
RETURNSSENDS
DUALEFFECTS PROCESSOR
LL
RR
MIX
FX BAL
ENG1
ENG2
LL
RR
MIX
FX BAL
ENG 1 ENG 2
LL
RR
MIX
FX BAL
ENG1
ENG2
MIXER
L
1R
RETURNSSENDS
M•ONE
DUALEFFECTS PROCESSOR
MIXER
12
INSERTS
M•ONE
DUALEFFECTS PROCESSOR
With this setup the two En ines are
used as separate stereo effects
with a common 2 channel Output.
Example: Feed the two MONE
en ines with si nal from e. . two
separate Aux-sends from your
mixer. Connect the MONE L/R
Output to a stereo L/R return on
your mixer.
In Serial mode En ine 1 is
always routed before En ine 2.
The Output of En ine 1 is routed
directly to the Input of En ine 2.
Example: Use a De-esser in
En ine 1 and a Reverb in
En ine 2.
In this mode the MONE works as
two completely independent mono
units. This would be a typical setup
when usin the MONE as two
Compressors, Limiters, De-esser or
basically any combination of two
non stereo Effects
Dual Input Mode Serial Mode Dual Mono Mode
Dual Input Routing Serial Routing Dual Mono Routing
How to change algorithms:
- Press the ALGO/EDIT 1 or 2 dependin on which En ines al orithm you wish chan e.
- Select al orithm usin the CONTROL wheel.
- Press ENTER to confirm.
- Connect the MONE as illustrated below, usin balanced 1/4 jack cables.
- Press the ROUTING key to enter the Routin display.
- Use the CONTROL wheel to select Routin . The ENTER key is now blinkin .
- Press ENTER to activate the selected Routin .
Other manuals for M-ONE
2
Other TC Electronic Recording Equipment manuals
TC Electronic
TC Electronic Konnekt 24D User manual
TC Electronic
TC Electronic M100 User manual
TC Electronic
TC Electronic G-MAJOR 2 User manual
TC Electronic
TC Electronic SYSTEM 6000 MKII User manual
TC Electronic
TC Electronic GUITAR User manual
TC Electronic
TC Electronic G-MAJOR 2 User manual
TC Electronic
TC Electronic D-TWO User manual
TC Electronic
TC Electronic FireworX User manual
TC Electronic
TC Electronic M2000 User manual
TC Electronic
TC Electronic P2 Level Pilot Use and care manual
TC Electronic
TC Electronic D-TWO User manual
TC Electronic
TC Electronic G-Force User manual
TC Electronic
TC Electronic INTONATOR User manual
TC Electronic
TC Electronic Multi-effects Processor G-Natural User manual
TC Electronic
TC Electronic TC ICON PEQ 3000 NATIVE User manual
TC Electronic
TC Electronic UpCon User manual
TC Electronic
TC Electronic Mastering 6000 Assembly instructions
TC Electronic
TC Electronic REVERB 4000 User manual
TC Electronic
TC Electronic G-Natural User manual
TC Electronic
TC Electronic Finalizer Epress Operating manual
