Tamron A014 User manual

AF18-200mm

F/3.5-6.3 XR Di II LD Aspherical [IF] Macro

(Model A014)

Thank you for purchasing the Tamron lens as the latest addition to

your photographing equipment. Di II lens (Digitally Integrated)

series are designed for digital SLR cameras with image sensors

equivalent to APS-C size. (approx. 15.5 x 23.2mm). Before using

your new lens, please read the contents of this Owner's Manual

thoroughly to familiarize yourself with your lens and the proper

techniques for creating the highest quality images possible.With

proper handling and care, your Tamron lens will give you many

years of photographing beautiful and exciting pictures.

NOMENCLATURE

1. Lens hood

2. Hood attaching alignment mark

3. Hood attached indicator

4. Hood attaching bayonet ring

5. Distance index

6. Distance scale

7. Focusing ring

8. Zooming ring

9. Focal length scale

10. Zoom index mark

11. Zoom lock switch

12. Lens mount / Lens mount contacts (Nikon)

13. AF-MF switch (Canon)

14. Lens attachment mark

FOCAL LENGTH 18 ~ 200 mm

MAXIMUM APERTURE F/3.5-6.3

ANGLE OF VIEW 75 deg. 33’ - 7 deg. 59’

LENS CONSTRUCTION

(GROUPS / ELEMENTS) 13/15

MINIMUM FOCUS DISTANCE 0.45 m

FILTER SIZE 62 mm

LENGTH 83.7 mm

DIAMETER 73.8 mm

WEIGHT 398 g

SPECIFICATIONS

ATTACHING AND REMOVING THE LENS

*How to mount the lens

Remove the rear cap of the lens. Align the lens attachment mark on the lens barrel

with its counterpart on the camera mount and insert the lens. Rotate the lens clock-

wise until it click-locks. For Nikon and Pentax models, align the lens attachment mark

on the camera and the zoom index on the lens to attach the lens.

* How to detach the lens

Pressing the lens release button on the camera down, turn the lens counter-clockwise

(in case of Nikon, clockwise), and lift the lens off the camera's lens mount.

**The image circles of Di II lenses are designed to match the digital SLR cameras

using the image sensors equivalent to APS-C (approx. 15.5 x 23.2mm). Do not use Di II

lenses with cameras using image sensors larger than APS-C. Using Di II lenses with

such cameras may cause vignetting on the image.

FOCUSING (AUTOFOCUS)

Switch the camera or lens to AF mode. Press the shutter button lightly while viewing

through the camera's viewfinder, the lens focuses automatically. An in-focus mark will

light when lens focuses on the main subject sharply. Press the shutter button further

to photograph.

*When set on AF mode, interfering with the focusing ring may cause serious damage

to the lens mechanism.

* Select between the autofocus and manual focus modes by using the AF/MF switch

on the camera in case of Nikon, Konica Minolta, or Pentax lens.The lens for Canon

cameras has the AF/MF switch on the lens.

FOCUSING (MANUAL FOCUS)

Switch the focusing mode switch of the camera to manual focusing mode (MF) in

case if Nikon, Konica Minolta, or Pentax. In case of Canon camera, switch the AF/MF

switch on the lens to MF. Focus by manually rotating the focusing ring while viewing

through the camera's viewfinder. The main subject in the viewfinder will be sharp

when the lens is focused correctly.

*Even when in MF mode, turning the focusing ring while pressing the shutter button

halfway, the focus aid function lamp lights up when the picture is in focus.

* At infinity, make sure the image in the viewfinder appears sharp. The infinity posi-

tion on the lens is made with certain allowances to insure proper focus under a vari-

ety of conditions.

ZOOMING

Rotate the zooming ring of the lens while viewing through the camera's viewfinder

and compose your image at the chosen focal length.

ZOOM LOCK SWITCH

Model A014 is equipped with a zoom lock switch mechanism which prevents the lens

barrel from extending towards longer focal lengths while being carried around the

neck, or off the shoulder. Activate the switch at the shortest setting to stop the lens

barrel from rotating and extending.

*How to activate the zoom lock switch mechanism

1. Locking: Set the zoom ring on the lens to the shortest position. Move the zoom

lock switch toward the camera to lock the zooming ring.

2. Releasing: Push the zoom lock switch back up. The zooming ring is now released

and can be rotated.

** Zoom lock switch cannot be activated unless the lens is set to the shortest posi-

tion. Do not force the lock switch or try to rotate the zooming ring while locked;

doing so may damage the lens.

** The zoom lock mechanism is made to prevent the lens barrel from extending while

carried around the neck.When not locked, the zoom lens may change its focal length

during a long exposure in a low or high angle.

LENS APERTURE AND AE MODE

Please follow the instruction manual of your camera.

LENS HOOD

A bayonet type lens hood is provided as standard equipment.We recommend

shooting with the hood attached whenever possible as the lens hood eliminates stray

light which is harmful to the picture. However, please be aware of the precautions

written below when your camera is equipped with a built-in flash.

* Attaching the Lens Hood

Align the index mark on the hood with the corresponding index mark on the lens.

Press the hood lightly onto the hood attaching bayonet ring and then rotate it clock-

wise to secure. The lens hood will be securely held as the mark "TAMRON O" comes to

the top. When attaching the lens hood, hold the focusing and zoom control rings so

that they are not rotated unintentionally.

LENS HOOD (Continued)

** Pay particular attention to align the hood attaching indexes when using zoom

lenses including wide-angle (35mm or wider) settings. Improper attachment of a

hood for wide-angle zoom lenses may cause large shadowed areas in your pictures.

* Stowing lens hood on the lens

1. Reverse the lens hood. Point the lens toward the opening, and then align the

hood attachment mark on the lens with the (TAMRON O) alignment on the hood.

2. Turn the hood clockwise until the alignment mark is at the top to set it.

PRECAUTIONS IN SHOOTING

*The optical design for this lens takes into consideration the various features of digi-

tal single reflex cameras. However, due to the configuration of the digital single reflex

cameras, even when the autofocus accuracy is within specifications, the focal point

may be a little forward or behind the optimum point when shooting with autofocus

under some conditions.

*The image circles of Di II lenses are designed to match the digital SLR cameras using

the image sensors equivalent to APS-C. Do not use Di II lenses with cameras using

image sensors larger than APS-C. Using Di II lenses with such cameras may cause

vignetting on the image.

* The Tamron lens described here employs an internal focusing system [IF]. Because of

the characteristics of this optical design, the angles of view at distances other than

infinity are wider than that of the lenses applying an ordinary focusing system.

*When the built-in flash on the camera is used, adverse photographic phenomena

such as corner illumination fall-off or vignetting at the bottom part of the image may

be observed. This is due to the inherent illumination of the coverage of the built-in

flash, and/or the relative position of the flash to the edge of the lens barrel which

causes shadows on image. It is strongly recommended to use a suitable separate flash

unit provided by the camera manufacturer for all flash photography.

*Do not forcibly turn the focusing ring when the lens in set in AF mode. Doing so

could damage the lens and/or camera.

* Certain camera models may indicate the maximum and minimum aperture values

of the lens as approximate numbers.This is inherent to the design if the camera and

not an indication of error.

TO ENSURE LONG-TERM SATISFACTION

*Avoid touching the glass element surface. Use a photographic lens cloth or blower

to remove dust from the lens element surface. When not using the lens, always place

a lens cap on it for protection.

*Use a lens cleaning tissue or lint cloth with a drop of cleaning solution to remove

fingerprints or dirt on the glass lens surface with a rotary motion from the center to

the edge. Use a silicon cloth to clean your lens barrel only.

* Clean the lens barrel with a silicon cloth. Do not use benzene or paint thinner or

other organic cleansers.

*Mildew is an enemy of your lens. Clean the lens after shooting near water or in any

humid place. Store your lens in a clean, cool and dry place. When storing the lens in a

lens case, store it with commercially available drying agent such as silica gel, and

change the agent occasionally. If you find mildew on your lens, consult an authorized

repair shop or nearby photographic store.

*Do not touch the lens-camera mount contacts since dust and/or dirt stains may

cause a contact failure between the lens and camera.

* When using your equipment in an environment where the temperature changes

from one extreme to the other, make sure to put your equipment temporarily in a

case or plastic bag for a length of time in order to go through a gradual temperature

shift. This will reduce potential equipment trouble.

TAMRON USA, INC.

10 AUSTIN BLVD.

COMMACK, NY 11725

Table of contents

Popular Camera Lens manuals by other brands

THORLABS

THORLABS ELL15 user guide

FUJICA

FUJICA ZC1000 owner's manual

Sony

Sony SEL-55210 operating instructions

Sony

Sony VCL-HG2037 operating instructions

Honeywell

Honeywell HLM25V6F12 manual

Sony

Sony VCL-ST30 operating instructions

Canon

Canon FD 35 - 70 mm instructions

Sony

Sony SAL-85F14Z - 85mm f1.4 Carl Zeiss Planar T Coated Telephoto... operating instructions

ARRI

ARRI Lenses brochure

Panasonic

Panasonic LUMIX G X Vario 45-175mm f/4.0-5.6 operating instructions

Nikon

Nikon AF-S VR 24-120 f/3.5-5.6G IF-ED instruction manual

Rokinon

Rokinon DS50M-C instruction manual

Olympus

Olympus M.Zuiko Digital ES 300mm f4.0 IS PRO instructions

Sony

Sony VCL-DE07T operating instructions

Canon

Canon FD Lens Guide book

Samsung

Samsung 20-50mm F3.5-5.6 ED II user manual

Sinar

Sinar Rolleiflex 6008 AF Brochure & specs

Rokinon

Rokinon SP 85mm F1.2 instruction manual