Connect to T-Mobile Broadband
Connect to T-Mobile Broadband
You do not need to add a prole or change settings to connect to
T-Mobile Broadband.
1. Make sure your SIM card is in your webConnect Jet.
2. Insert your webConnect Jet into your laptop.
3. Open the webConnect Manager.
4. Click the T-Mobile Broadband tab.Your webConnect Jet
will then scan the area for available networks.
5. Click Connect.
Connect to other networks
To connect to another network, you must rst create a prole for that
network.
Create a prole
1. At the main webConnect Manager screen, click the
T-Mobile Broadband tab.
2. Click Tools > Proles. The Proles screen opens.
3. At the Proles screen, click Add.
4. Click Broadband and then click Add.
5. Select the network whose prole you would like to add or
select Create Customer Prole if you want to create a prole
Insert memory card
Your webConnect Jet supports a
microSDHCTM memory card
(not included with your purchase).
NOTE: Do not remove your memory card
while it is in use. Removing the memory card
while in use may corrupt the data stored on
your memory card and damage the memory
card or your webConnect Jet.
Slide the memory card into the memory card slot with the golden
contacts facing the back side of your webConnect Jet.
Install the webConnect Manager
Connect your webConnect Jet to the USB port of your computer.
For Windows, the webConnect Manager installs automatically.
For MAC, follow the instructions below:
1. Insert your WebConnect Jet into your laptop. A virtual
webConnect Mgr CD-ROM opens on your desktop.
2. Double-click the webConnect Mgr CD-ROM.
3. Open the MacUsersStartHere.html le for instructions on how to
install the webConnect Manager software on your MAC.
