System air DVN User manual

Document in original language | · 006

Roof fans

DVN(I), DVS(I), DVC(I), DHS

Installation and Operating Instructions GB

| 006

E&OE

Systemair AB reserves the rights to alter their products without notice.

This also applies to products already ordered, as long as it does not affect the previously agreed specifications.

| 006

Contents

1 General information.........................................1

1.1 Notice symbols......................................1

1.1.1 Instruction symbols.....................1

2 Important safety information .............................1

2.1 Personnel .............................................1

2.2 Personal protective equipment..................2

2.3 5 rules of electrical safety ........................2

3 Warranty.......................................................2

4 Delivery, transport, storage ...............................2

5 Description ....................................................3

5.1 Intended use .........................................3

5.2 Technical data .......................................3

5.3 Description DVN/DVNI.............................4

5.4 Description DVS/DVSI ..............................5

5.5 Description DVC/DVCI..............................6

5.6 Description DHS .....................................7

6 Name plate and type key ..................................8

7 Accessories....................................................9

8 Installation................................................... 10

8.1 Installation of the ventilation

system ..............................................10

8.1.1 DVC-P measuring tubes ............. 11

8.2 Assembly/Disassembly impeller —

Internal rotor motor .............................. 11

8.3 Assembly tilting device (FTG).................. 13

9 Electrical connection ...................................... 13

9.1 Electrical connection accessories ............. 14

9.2 Protecting the motor............................. 15

9.3 Variable-speed fans.............................. 15

10 Commissioning ............................................. 15

11 Operation .................................................... 15

12 Troubleshooting/maintenance/repair ................ 16

12.1 Troubleshooting................................... 16

12.2 Maintenance....................................... 18

13 Cleaning...................................................... 18

14 Deinstallation/dismantling............................... 19

15 Disposal ...................................................... 19

16 EU Declaration of conformity — Roof

fans ...........................................................19

17 EU Declaration of conformity — Thermo

fans ...........................................................19

18 Commissioning Report.................................... 20

General information | 1

1 General information

1.1 Notice symbols

Note:

Useful information and instructions

1.1.1 Instruction symbols

Instruction Instruction with xed sequence

♦Carry out this action 1. Carry out this action 3. (if applicable, further actions)

♦(if applicable, further actions) 2. Carry out this action

2 Important safety information

Planners, plant builders and operators are responsible for the proper assembly and intended use.

♦Read the operating instructions completely and carefully.

♦Keep the operating instructions and other valid documents, such as the circuit diagram or motor instructions, with

the fan. They must always be available at the place of use.

♦Observe and respect local conditions, regulations and laws.

♦Abide by the system-related conditions and requirements of the system manufacturer or plant constructor.

♦Safety elements may not be dismantled, circumvented or deactivated.

♦Only use the fan in a awless condition.

♦Provide generally prescribed electrical and mechanical protective devices.

♦During installation, electrical connection, commissioning, troubleshooting, and maintenance, secure the location and

premises against unauthorised access.

♦Do not circumvent any safety components or put them out of action.

♦Keep all the warning signs on the fan complete and in a legible condition.

♦The device is not to be used by persons (including children) with reduced physical, sensory or mental capabilities, or

lack of experience and knowledge, unless they have been given supervision or instruction.

♦Do not allow children to play with the device.

2.1 Personnel

The fan may only be used by qualified, instructed and trained personnel. The persons must know the relevant safety di-

rectives in order to recognise and to avoid risks. The individual activities and qualifications can be found in Table 1 Qual-

ifications, page 1.

Table 1 Qualifications

Activities Qualifications

Storage, operation, transport, cleaning, disposal Trained personnel (see following note)

Electrical connection, commissioning, electrical

disconnection Electrical expert or matching qualification

Installation, disassembly Fitter or matching qualification

Maintenance Electrical expert or matching

qualification

Fitter or matching

qualification

Repair

Electrical expert or matching

qualification

Fitter or matching

qualification

Smoke extraction fans and EX fans only by agreement with

Systemair.

| 006

2|Warranty

Note:

The operator is responsible for ensuring that personnel are instructed and have understood the contents of

the operating instructions. If something is unclear, please contact Systemair or its representative.

2.2 Personal protective equipment

♦Wear protective equipment during all work in the vicinity of the fan.

• protective working clothes

• protective working shoes

• protective working gloves

• helmet

• goggles

• hearing protection

2.3 5 rules of electrical safety

1. Disconnect (disconnection of

the electrical system from

live components at all

terminals)

2. Prevent reactivation

3. Test absence of voltage

4. Ground and short-circuit

5. Cover or restrict adjacent live parts

3 Warranty

For the assertion of warranty claims, the products must be correctly connected and operated, and used in accordance

with the data sheets. Further prerequisites are a completed maintenance plan with no gaps and a commissioning re-

port. Systemair will require these in the case of a warranty claim. The commissioning report is a component of this

document. The maintenance plan must be created by the operator, see section 12.2 Maintenance, page 18.

4 Delivery, transport, storage

Safety information

Warning: Risk from rotating fan blades

♦Prevent access by unauthorised persons by safety personnel or access protection.

Warning: Suspended loads

♦Do not walk under suspended loads.

♦Make sure that there is nobody under a suspended load.

Delivery

Each fan leaves our plant in an electrically and mechanically proper condition. We recommend transporting the fan to

the installation site in the original packaging.

Checking delivery

♦Check the packaging and the fan for transport damage. Any findings should be noted on the cargo manifest.

♦Check completeness of the delivery.

Unpacking

When opening the transport packaging, there is a risk of damage from sharp edges, nails, staples, splinters etc.

♦Unpack the fan carefully.

♦Check the fan for obvious transport damage.

♦Only remove the packaging shortly before assembly.

Transport

Safety information

Warning: Electrical or mechanical hazards due to fire, moisture, short circuit or malfunction.

♦Never transport the fan by the connecting wire, terminal box, impeller, protection grille, inlet cone or silencer.

♦In open transport, please make sure that no water can penetrate into the motor or other sensitive parts.

♦We recommend transporting the fan to the installation site in the original packaging.

| 006

Description |3

Caution: If transported without care during loading and unloading, the fan may be damaged.

♦Load and unload the fan carefully.

♦Use hoisting equipment that is suitable for the weight to be hoisted.

♦Observe the transportation arrows on the packaging.

♦Use the fan packaging exclusively as transport protection and not as a lifting aid.

Storage

♦Store the fan in the original packaging in a dry, dust-free location protected against weather.

♦Avoid the effects of extreme heat or cold.

Hazard due to loss of function of the motor bearing

♦Avoid storing for too long (recommendation: max. 1 year).

♦Check that the motor bearing functions properly before installation.

5 Description

5.1 Intended use

All roof fans

• The fans are intended for installation in ventilation systems. They can be installed both in duct systems and also

with free suction via an inlet cone and a suction-side contact protection grille. Systemair recommends a Back draft

damper (VKS) to avoid cold air intake at a standstill of the fan, see 7 Accessories, page 9.

• The fans are exclusively intended for extract air applications.

DVN, DVNI

• The fan is suitable for conveying contaminated air

(dust, kitchen exhaust).

DVS, DVSI, DVC, DVCI, DHS

• The fan is suitable for conveying clean air.

Incorrect use

Incorrect use refers mainly to using the fan in another way to that described. The following examples are incorrect

and hazardous:

• Conveying of explosive and combustible media

• Conveying of aggressive media

• Operation in an explosive atmosphere

• Operation without duct system or protection grille

• Operation with the air connections closed

5.2 Technical data

Max. ambient temperature [°C]

see data sheet, available in our online catalogue.Max. temperature of transported air [°C]

Sound pressure [dB]

Voltage, current, frequency, enclosure class, weight see name plate of the fan

The motor data can be found on the name plate of the motor, or in the technical documents of the motor

manufacturer.

The data on the name plate of the fan apply to "standard air" according to ISO 5801.

| 006

4|Description

5.3 Description DVN/DVNI

Table 2 Dimensions DVN

Ri K

M20x1,5

I(4x)

[mm] A B C D E F G H I J K

355—400 720 618 600 390 438 595 450 200 12(4x) 6xM8 18.5

450—500 900 730 675 465 438 665 535 237 12(4x) 6xM8 18.5

560—630 1150 955 900 560 605 939 750 293 14(4x) 8xM8 0

710 1350 1178 936 660 674 1035 840 320 14(4x) 8xM8 0

800—900 1690 -1180 830 872 1255 1050 433 14(4x) 8xM8 0

Table 3 Dimensions DVNI

[mm] A B C D E F G H I J K

355—400 874 648 600 439 438 595 450 200 12(4x) 6xM8 18.5

450—500 970 730 675 479 438 665 535 237 12(4x) 6xM8 18.5

560—630 1315 1035 900 600 605 939 750 293 14(4x) 8xM8 0

710 1483 1165 936 729 674 1035 840 320 14(4x) 8xM8 0

800—900 1590 -1180 830 872 1255 1050 433 14(4x) 8M8 0

| 006

Description |5

5.4 Description DVS/DVSI

Table 4 Dimensions DVS

M20x1,5

[mm] A B C E F H K I

190–225 370 320 175 335 245 6xM6 213 10(4x)

310–311 560 470 330 435 330 6xM8 285 10(4x)

355–400 723 623 390 595 450 6xM8 438 12(4x)

450–500 900 730 465 665 535 6xM8 438 12(4x)

560–630 1150 960 565 939 750 8xM8 605 14(4x)

710 1350 1185 660 1035 840 8xM8 674 14(4x)

Table 5 Dimensions DVSI

[mm] A B C E F H K I

190–225 498 438 210 335 245 6xM6 213 10(4x)

310–311 695 584 370 435 330 6xM8 285 10(4x)

355–400 877 745 440 595 450 6xM8 438 12(4x)

450–500 970 825 479 665 535 6xM8 438 12(4x)

560–630 1315 1130 600 939 750 8xM8 605 14(4x)

710 1483 1185 729 1035 840 8xM8 674 14(4x)

| 006

6|Description

5.5 Description DVC/DVCI

S-Version:

The DVC-S version can be stepless controlled via a 0-10 V signal. The operating point can be directly adjusted with the

integrated potentiometer (10 K ohms).

POC-Version

The DVC-POC version has integrated pressure sensors and temperature sensor for outdoor temperature compensation.

The electronics can be programmed for a constant pressure operation with or without outdoor temperature compensa-

tion (The factory setting is with outdoor temperature compensation). For any details of the controller, please see the

separate attached controller manual.

P-Version:

The DVC-P version has integrated pressure sensors and the electronic is programmed for a constant pressure operation.

For any details of the controller, please see the separate attached controller manual.

This version can also be ordered as CAV (constant air volume).

Table 6 K-factor (measured values) DVC-P

315–P EC 103 450–P EC 245 560–P EC 298

355–P EC 143 450–K-P EC 253 630–P EC 498

400–P EC 207 500–P EC 365 710–P EC 628

Table 7 Dimensions DVC-S

M20x1,5

[mm] A B C E F H K I

190–225 370 320 175 335 245 6xM6 213 10(4x)

315 560 470 330 435 330 6xM8 285 10(4x)

355–400 723 623 390 595 450 6xM8 438 12(4x)

450–500 900 730 465 665 535 6xM8 438 12(4x)

560–630 1150 960 565 939 750 8xM8 605 14(4x)

Table 8 Dimensions DVCI-S

[mm] A B C E F H K I

190–225 498 438 210 335 245 6xM6 213 10(4x)

315 695 584 370 435 330 6xM8 285 10(4x)

355–400 874 648 439 595 450 6xM8 438 12(4x)

450–500 970 730 479 665 535 6xM8 438 12(4x)

560–630 1315 1130 600 939 750 8xM8 605 14(4x)

| 006

This manual suits for next models

Table of contents

Other System air Fan manuals

System air

System air fantech FKD EC Series Manual

System air

System air Sinus-G User manual

System air

System air SAVE VTC 300 Manual

System air

System air prioAir Series User manual

System air

System air fantech bathfan Commercial COM200 Manual

System air

System air fantech Rn2SL User manual

System air

System air Fantech DEDPV-705 User manual

System air

System air BF Silent 100 User manual

System air

System air SAVE VSR 300 Manual

System air

System air fantech Pro 150 User manual

System air

System air DKEX 225-4 Manual

System air

System air AJ8 Series User manual

System air

System air KBR 355EC-K User manual

System air

System air SAVE VTR 200/B Quick start guide

System air

System air PRF Installation instructions

System air

System air Fantech PBF Series User manual

System air

System air Fantech SHR200 User manual

System air

System air KBR Manual

System air

System air Fantech VER200 User manual

System air

System air KFA Manual

System air

System air VTR 100/B LITE User manual

System air

System air PRF 125 Series User manual

System air

System air SYSWALL 21 User manual

System air

System air IV User manual

Popular Fan manuals by other brands

ELTA FANS

ELTA FANS H03VV-F installation guide

Hunter

Hunter 20714 Owner's guide and installation manual

Emerson

Emerson CARRERA VERANDA CF542ORB00 owner's manual

Hunter

Hunter Caraway Owner's guide and installation manual

Panasonic

Panasonic FV-15NLFS1 Service manual

Kompernass

Kompernass KH 1150 operating instructions

VES

VES FALA100/12V/TR Original instructions

Vertiv

Vertiv Liebert DCD user manual

Westinghouse

Westinghouse GFP Series owner's manual

Venmar

Venmar KUBIX HRV PLUS Series user guide

Maico

Maico ECR 31 installation instructions

Sonnenkonig

Sonnenkonig Dinky instruction manual

S&P

S&P ECOWATT HXBR manual

Wider

Wider IMP03369BH instruction manual

Panasonic

Panasonic F-60DHN Operating and installation instructions

Hinkley

Hinkley HIGHLAND instruction manual

Broan

Broan 766BN installation guide

Premium

Premium PFS16022 Use manual