Synology DiskStation DS413j User manual
Synology DiskStation DS413j
Quick Installation Guide
Synology_QIG_DS413j_20120831
2
Table of Contents
Chapter 1: Before You Start
Package Contents .............................................................................................................................................................. 3
Synology DiskStation at a Glance.................................................................................................................................... 4
Safety Instructions .............................................................................................................................................................. 5
Chapter 2: Hardware Setup
Tools and Parts for Hard Disk Installation....................................................................................................................... 6
Install Hard Disks................................................................................................................................................................ 6
Start Up Your DiskStation................................................................................................................................................ 10
Chapter 3: Install DSM on DiskStation
Install DSM from the Web Browser ................................................................................................................................ 11
Install DSM from the Installation Disc ............................................................................................................................ 12
Learn More ........................................................................................................................................................................ 16
Appendix A: Specifications
Appendix B: LED Indication Table
3
Chapter
1
Chapter 1: Before You Start
Before you start setting up DiskStation, please check the package contents to verify that you have received the
items below. Please also read the safety instructions carefully before use to prevent your DiskStation from any
damages.
Package Contents
Main Unit x 1 AC power cord x 1
AC power adapter x 1
RJ-45 LAN cable x 1
Installation disc x 1
Screws for 3.5"
hard drives x 18
Screws for 2.5"
hard drives x 18
Screws for securing
hard disk trays x 8 Cable lock x 1
4 Chapter 1: Before You Start
Synology DiskStation at a Glance
No. Name Location Description
1) Power Button Front Panel
The power button is used to turn Synology DiskStation on or off.
To turn off Synology DiskStation, press the power button and hold it until
you hear a beep sound and the Power LED starts blinking.
2) LED Indicators Front Panel
The LED indicator is used to display the status of the internal disk and
the system. For more information, see "Appendix B: LED Indication Table"
on Page 18.
3) USB 2.0 Ports Back Panel The Synology DiskStation offers USB ports for adding additional external
hard drives, USB printers, or other USB devices.
4) Fans Back Panel The fans are built to exhaust waste heat out of Synology DiskStation. If
the fan is malfunctioning, the system will play beep sounds.
5) RESET Button Back Panel 1.To restore IP, DNS, passwords for the admin account to default value.
2.To reinstall the Synology DiskStation.
6) LAN Port Back Panel The LAN port is where you connect RJ-45 cable to Synology DiskStation.
7) Power Port Back Panel The power port is where you connect the AC adapter to
Synology DiskStation.
5 Chapter 1: Before You Start
Safety Instructions
Keep away from direct sunlight and away from chemicals. Make sure the environment does not
experience abrupt changes in temperature or humidity.
Do not place the Synology product close to any liquid.
Before cleaning, unplug the power cord first. Wipe Synology product with damp paper towels. Do
not use chemical or aerosol cleaners to clean it.
Do not place the Synology product on a cart, table, or desk, which is not stable to avoid the
product from falling over.
The power cord must plug in to the right supply voltage. Make sure that the supplied AC voltage
is correct and stable.
To remove all electrical current from the device, ensure that all power cords are disconnected
from the power source.
6
Chapter
2
Chapter 2: Hardware Setup
Tools and Parts for Hard Disk Installation
A screwdriver
At least one 3.5” or 2.5” SATA hard disk
(Please visit www.synology.com for compatible hard disk models.)
Warning: If you install a hard disk that contains data, system will format the hard disk and erase all data. If you need
the data in the future, please back it up before installation.
Install Hard Disks
1 Remove the 4 screws that secure the back cover, and then put the back cover down carefully.
2 Lift the upper case and then place it aside.
7 Chapter 2: Hardware Setup
3 Load the hard disk in the hard drive tray.
For 3.5” Hard Disk: Place the hard disk in the hard drive tray, and then tighten the screws to secure the
hard disk.
For 2.5” Hard Disk: Place the hard disk in the blue area (shown below) of the hard drive tray, turn the tray
upside down, and then tighten the screws to secure the hard disk.
4 Insert the loaded hard drive tray into the empty hard drive bay.
Important: Make sure the tray is pushed in all the way. Otherwise, the hard disk might not be able to function
properly.
5 Repeat the steps above to assemble the other hard disks you have prepared.
8 Chapter 2: Hardware Setup
6 The disks’ positions are numbered as shown below.
For 3.5” Hard Disk (only):Secure the hard disk trays with the screws (for securing hard disk trays)
provided, which is not required for 2.5” hard disk.
7 Place the upper case back to its position.
9 Chapter 2: Hardware Setup
8 Attach the cable lock to the corresponding hole above the power port on the back cover. Make sure the cable
lock is hooked on the inner side of the back cover.
9 Close the back cover. Replace and tighten the 4 screws you removed in step 1.
Note: If you want to set up a RAID set, it is recommended that all installed hard disks are of the same size to make
the best use of hard disk capacity.
10 Chapter 2: Hardware Setup
Start Up Your DiskStation
1 Connect the AC adapter to the power port of DiskStation. Connect one end of the AC power cord to the AC
power adapter, and the other to the power outlet.
2 Use the LAN cable to connect DiskStation to your switch/router/hub.
3 Press and hold the power button to turn on your DiskStation.
Your DiskStation is now online and detectable from a network computer.
Table of contents
Other Synology Network Storage Server manuals
Synology
Synology 16-disk storage server User manual
Synology
Synology DS216play User manual
Synology
Synology DiskStation User manual
Synology
Synology DS2413+ User manual
Synology
Synology RackStation RS212 User manual
Synology
Synology DiskStation DS112 User manual
Synology
Synology DiskStation DS214+ User manual
Synology
Synology RackStation RS814+ User manual
Synology
Synology DiskStation DS212j User manual
Synology
Synology DiskStation DS411 User manual
Synology
Synology NAS DS220+ User manual
Synology
Synology RS812RP+ User manual
Synology
Synology DiskStation DX213 User manual
Synology
Synology DS1511+ User manual
Synology
Synology DiskStation DX213 User manual
Synology
Synology DiskStation User manual
Synology
Synology DiskStation DS213air User manual
Synology
Synology DS713+ User manual
Synology
Synology DiskStation DS212j User manual
Synology
Synology DiskStation DS114 User manual
