SYMA X800W User manual
User manual
FOLDING DRONE
X800W
8
DE
Contents
1-22
EN ENGLISHINTRODUCE
23-46
DEUTSCH EINFÜHRUNG
Contents
1.0 Important safety information
2.0 About this product
2.1 Specifications
2.2 Install the SYMA FLY app
2.3 Drone components
2.4 Remote control components
3.0 Assembling the product
3.1 Installing the propeller protectors
3.2 Charging the drone battery
4.0 Flight guide
4.1 Flight preparation and turning the drone on/off
4.2 The method of Remote control flight controlling
4.3 Stunt functions
4.4 Trimming
5.0 Function introduction
6.0 Real-time transmission function
8.0 Contact Us
7.0 Accessories (available separately)
2
3
8
11
17
3
3
4
4
5
6
8
9
10
11
15
16
5
1
EN
1.0 Important safety information
Safety Guide
Repair and maintenance
Thank you for purchasing this SYMA product. To ensure that you operate the aircraft correctly and
conveniently, please read these instructions carefully before first use and store them in a safe place for
future reference.
1.Adult or experienced RC pilot’s supervision is recommended for children.
2.Rechargeable batteries are to be removed from the toy before being charged.
3.Batteries are to be inserted with the correct polarity.
4.Rechargeable batteries are only to be charged under adult supervision.
5.Non-rechargeable batteries should not be recharged; Batteries should be inserted with a correct
polarity; Different types of batteries, new or used batteries should not be mixing.
6.Turn off the drone/transmitter and remove the batteries when not in use.
7.The supply terminals are not be short-circuited.
8.Keep away from the rotating blades (rotating blades may cause bodily injuries, or damage to
property).
9.Attention：please assemble the drone with the guidance of adults.
10.Do not look directly into the LED lights of the drone as it can damage your eyes.
11.Exhausted batteries are to be removed from the aircraft.
12.Please store the smaller-sized drone accessories in places that are out of reach of children.
13.This drone is very powerful. For all first-time flights, the left joystick must be slowly pushed up in
order to prevent the drone from ascending too fast to avoid unnecessary collision and possible
damage and injury.
14.When the flight is ended, first turn off the power of the remote control. Then turn off the power of
the drone.
15.Avoid placing the batteries in places with high temperatures and exposure to heat.
16.Please keep a safe distance from the spinning propellers to avoid injury.
17.To ensure the electromagnetic environment requirement of the aviation radio (station), using
remote controls in the zone, which is in a radius of about 5000m zone from the circle center of the
airport runway, is forbidden. All users also should abide by the regulation of the radio set forth by
government and regulatory agencies including the duration and area.
18.Pay attention to keeping distance of 2-3 meters from the user or other people when the drone is
flying, avoid the drone landin to hit the head, face or face or body of anoter person.
19.Attention：Drone assembly under adult supervision.
20.The packing has to be kept since it contains important information.
1.Use clean and soft cloth to clean the product.
2.Keep away the product from heat sources.
3.Avoid water exposure to this product. Moisture may cause damages of drone electronic parts.
4.Transformers used with the drone should be examined regularly, such as propel blade, motor,
battery and other parts. In case of any damages is found, please stop using it unless it is repaired or
replaced.
2
EN
2.0 About this product
2.1 Specifications
Aircraft
Aircraft weight Approx. 62g
Aircraft Size 305x305x55 mm
Brand Name SYMA
Model/ITEM NO. X800W
Range Approx. 30 m
Altitude Approx. 10 m
Flight time Approx. 12 mins
Motor ø6
Battery 3.7V 400mAh
Charging time Approx. 60 minutes
Remote control
Operating frequency 2.4 GHz
Operating temperature 0℃ to 40℃
Package contents
Aircraft 1
Remote control 1
USB charging cable 1
Propeller 4 (A/B)
Propeller protection frame 2
User manual 1
Phone holder 1
2.2 Install the SYMA Fly app
Scan the QR code with your mobile device or download the app from your app store.
AndroidiOS
*For best results, use a device with iOS 8.0/Android 5.0 or later.
Note:
3
EN
2.4 Remote control
2.3 Drone components
① Propeller protection frame
② Motor
③ Power switch
④ Propellers
⑤ Lens
⑥ Battery cover
⑦ Rear indicator
⑧ Front indicator
①
②
③
④
⑤
⑥⑦
① Power switch
② Left joystick
(press and hold for trimming
adjustments and release
when finished)
③ Phone holder
④ Right joystick
(short press to toggle between
high and low speed mode)
⑤ 3D flip button
⑥ One-touch take-off/landing button
⑦ Spin button
①
②
③
④
⑧
⑤
⑥
⑦
4
EN
3.1 Installing the propellers
3.0 Assembling the product
Note:
!
* The propellers are labelled “A/B”. Ensure that each propeller is inserted in the corresponding
position on the arms, and then tighten the screw.and then tighten the screws and attach the propeller
covers.
Folding the quadcopter
3
4
2
2
3
4
1
1
1. Unfold the arms in the direction of the arrow
Insert the protective frame into the fuselage in the direction of the arrow, and fasten the screws.
Remove the propeller covers and
screws in the direction of the arrow
Insert the propellers onto the body of the
quadcopter in the direction of the arrow
2. Fold the arms in the direction of the arrow
until the quadcopter is fully folded.
Detaching the propellers Re-installing the propellers
1
1
3
3
2
2
5
EN
Remove the battery
Attaching the phone holder
Insert the battery
Charge the battery
3.2 Charging the drone battery
1
2
Push the battery cover back, then flip it
up to remove the battery
Insert the battery and close the battery
compartment cover.
Note:
*Charge the drone with the USB charging cable that came with the product.
* Using adapters with a lower rated current will result in a longer charging time.
Insert the phone
holder
into the opening
on the remote
control.
Press the spring to
adjust the size of
the phone holder.
12
5V1A adapterUSB charging cable
Battery
USB
1 2 3
Red indicator is constant:
battery is charging.
Red indicator is off:
battery is fully charged.
*Ensure that the battery holder clicks into place.
6
EN
Inserting the remote control batteries
Note:
!
* When installing the batteries, ensure that you match the + and ‒ ends of the battery with the + and ‒
signs on the controller.
* During the battery installation, it must be ensured that the polarities of the batteries are matched
with that of the battery box. No battery shall be installed with the opposite polarity.
* Please do not use new and old batteries together.
* Please do not use different types of batteries together.
* Remote control do not use rechargeable batteries.
* Exhausted batteries are to be removed from the Remote control.
To insert the controller batteries, open the battery cover on the back of the remote control and insert
4x AA alkaline batteries, ensuring that you observe the polarity markings (batteries are not included
and must be purchased separately).
Note:
!
*Do not short circuit or compress the battery, as this may cause an explosion.
*Rechargeable batteries should be removed from the aircraft before charging
*Failure to follow all the instructions may result in serious injury, irreparable damage to the battery and may cause a fire,
smoke or explosion
*Always check the batterys condition before charging or using it
*Replace the battery if it has been dropped, or in case of an odor overheating, discolouration, deformation or leakage
*Use only the supplied charging cable.
*Exhausted batteries should be removed from the aircraft
*The battery temperature must never exceed 60℃(140°F), otherwise the battery could be damaged or ignite.
* Never charge on a flammable surface , near flammable products or inside a vehicle ( Preferably place the battery in an
on-flammable and nonconductive container ).
* Never leave the battery unattended during the charging process . Never disassemble or modify the housing's wiring，or
puncture the cells. Always ensure that the charger output voltage corresponds to the voltage of the battery . Do not short
circuit the batteries .
* Never expose the battery to moisture or direct sunlight, or store it in a place where temperatures could Exceed 60℃(drone
in the sun，for example)
* Improper battery use may result in a fire, explosion or other hazard.
Battery cover
4x AA batteries
7
EN
Table of contents
Other SYMA Drone manuals
SYMA
SYMA Z3 User manual
SYMA
SYMA LOG1623SM User manual
SYMA
SYMA GYRO REMOTE CONTROL SERIES User manual
SYMA
SYMA X5HW User manual
SYMA
SYMA X5SW-V3 User manual
SYMA
SYMA GYRO REMOTE CONTROL SERIES User manual
SYMA
SYMA X440 User manual
SYMA
SYMA X14W User manual
SYMA
SYMA X12S Explorers User manual
SYMA
SYMA X1 Manual
