⑸
RETURN: When work with WIT -1071F(EFP) monitor, press RETURN to switch on/off the return
DI window on the monitor.
⑹
Hea set socket: 5-pin XLR socket, for intercom with the CCU.
⑺
Fiber Cable socket: Transmit power, video, intercom, control signal and Tally. LEMO (3K.93C) or
NEUTRIK (NO2-4FDW-A) is optional, of which NEUTRIK (NO2-4FDW-A) can be directly input with
pure optical fiber cables.
⑻
⒃
Battery Plate: V-mount or Gold mount battery plate optional.
Fix the camera adaptor on camera battery mount position, and attached with V-mount or Gold mount
battery, so that the battery can power the camera adaptor and camera simultaneously.
⑼
TALLY: TALLY light display.
⑽
SDI IN: DI input socket, connected with camera DI to output signal.
⑾
SDI LOOP: DI loop output socket
，
loop signal output from input
⑽
DI IN, for on-camera monitor.
⑿
RETURN OUT: witcher returned DI output socket. Output the RETURN IN input signal of CCU.
⒀
CAM REMOTE*: 10-pin camera remote input.
Directly connect to Panasonic camera “REMOTE” socket. By the provided 10-pin to 8-pin conversion
cable, you can connect to ONY camera “REMOTE” socket. The camera remote control signal will be
transmit to CCU by Optical Fiber cable.
⒁
TALLY: TALLY and DC power output socket. (7-pin)
Work together with WIT -1071F(EFP) monitor and provided 7-pin to DB9 cable, the Camera
Adaptor can output TALLY signal and DC power to -1071F(EFP) monitor.
⒂
RETURN BUTTON: External Return DI on/off button connection (4-pin)
When work with WIT -1071F(EFP) monitor, you can switch on/off the return DI window on the
monitor by pressing the provided external Return DI on/off button .
* Remote Control Protocol Setting:
The Camera Adaptor supports ONY, Panasonic and JVC camera remote protocol.
For the V-mount plate installed Camera adaptor, the default Remote protocol is ONY’s;
For the Gold mount plate installed Camera adaptor, the default Remote protocol is Panasonic’s;
To change the remote Protocol, please press the button by the following sequence:
VOL
＋
＋＋
＋
, VOL
＋
＋＋
＋
, VOL
－
－－
－
, VOL
－
－－
－
, VOL
＋
＋＋
＋
, VOL
－
－－
－
, VOL
＋
＋＋
＋
, VOL
－
－－
－
to enter setting, and then press VOL
＋
＋＋
＋
to switch between "P"-Panasonic, "S"- ony and “J”-JVC,
and press VOL
－
－－
－
to save and quit.
