4
20407196xx_ba_e3
Registration to anot er base
The Registration button can be used in order the repeater to loose its current registra-
tion. In case the repeater needs to be registered to another base, press the Registration
button to start the easy registration procedure, then follow the same steps than in the
easy registration.
Limitations
• Ecomode plus is not supported when using the repeater.
• Conversation encryption is not supported when using the repeater.
• Handset software updates are only possible on the base station.
• The repeater can not be registered to the Swisscom Internet-Box.
Placement
To get the best operation conditions for the repeater, it is important to place it correctly:
➭Choose a raised position with good base station reception.
➭To avoid mutual interference, do not position the repeater in the immediate vicinity of
electronic equipment such as hi-fi systems, office equipment or microwave ovens.
➭Avoid positioning the repeater near heat sources such as heating elements or near
obstacles such as metal doors, thick walls, niches and cupboards.
➭A distance of minimum 10 meters should be observed when installing two repeaters in
an over lapping reception range.
➭If the repeater is placed at a location where the handset is already having a poor con-
nection to the base, the system behavior will not be optimal.
To find the best possible location for the repeater, you have to try different locations.
Establish a call and walk around with the handset to determine the base stations cover-
age area. You can install the repeater at a location within the coverage area, where you
still have a good connection between the handset and the base station. In order to
achieve good repeater coverage, use case is to step back about half the range where the
handset is loosing the connection in order to place the repeater.
A new coverage area will now be available around the repeater.
