SUPMEA SUP-C703S User manual
User's Manual
Signal generator
U-S4.1-S4.2-MYEN1
Supmea Automation Co.,Ltd.
www.supmea.com
Headquarters
5th floor,Building 4,Singapore Hangzhou Science Technology Park,
No. 6 street,Hangzhou Economic Development Area,
Hangzhou 310018,China
Singapore / Philippines
I
Preface
Thank you for purchasing Signal calibrator. Please read this
manual carefully before operating and using it correctly to avoid
unnecessary losses caused by false operation.
Note
Modification of this manual’s contents will not be
notified as a result of some factors, such as function
upgrading.
We try our best to guarantee that the manual content
is accurate, if you find something wrong or incorrect,
please contact us.
This product is forbidden to use in explosion-proof
occasions.
Version
U-S4.1-S4.2-MYEN1
II
Safety Precautions
In order to use this product safely, be sure to follow the safety
precautions described.
About this manual
Please submit this manual to the operator for reading.
Please read the operation manual carefully before
applying the instrument. On the precondition of full
understanding.
This manual only describes the functions of the
product. The company does not guarantee that the
product will be suitable for a particular use by the
user.
Precautions for protection, safety and modification of this
product
To ensure safe use of this product and the systems it
controls, Please read carefully the operation manual
and understand the correct application methods
before putting into operation, to avoid unnecessary
losses due to operation mistakes. If the instrument is
operated in other ways not described in the manual,
the protections that the instrument give may be
destroyed, and the failures and accidents incurred
III
due to violation of precautions shall not be borne by
our company.
When installing lightning protection devices for this
product and its control system, or designing and
installing separate safety protection circuits for this
product and its control system, it needs to be
implemented by other devices.
If you need to replace parts of the product, please
use the model specifications specified by the
company.
This product is not intended for use in systems that
are directly related to personal safety.Such as
nuclear power equipment, equipment using
radioactivity, railway systems, aviation equipment,
marine equipment, aviation equipment and medical
equipment.If applied, it is the responsibility of the
user to use additional equipment or systems to
ensure personal safety.
Do not modify this product.
The following safety signs are used in this manual:
Hazard, if not taken with appropriate
precautions, will result in serious personal
injury, product damage or major property
damage.
IV
Warning:Pay special attention to the
important information linked to product or
particular part in the operation manual.
Confirm if the supply voltage is in consistent with the
rated voltage before operation.
Don’t use the instrument in a flammable and
combustible or steam area.
To prevent from electric shock, operation mistake, a
good grounding protection must be made.
Thunder prevention engineering facilities must be
well managed: the shared grounding network shall
be grounded at is-electric level, shielded, wires shall
be located rationally, SPD surge protector shall be
applied properly.
Some inner parts may carry high voltage. Do not
open the square panel in the front except our
company personnel or maintenance personnel
acknowledged by our company, to avoid electric
shock.
Cut off electric powers before making any checks, to
avoid electric shock.
Check the condition of the terminal screws regularly.
V
If it is loose, please tighten it before use.
It is not allowed to disassemble, process, modify or
repair the product without authorization, otherwise it
may cause abnormal operation, electric shock or fire
accident.
Wipe the product with a dry cotton cloth. Do not use
alcohol, benzine or other organic solvents. Prevent
all kinds of liquid from splashing on the product. If
the product falls into the water, please cut off the
power immediately, otherwise there will be leakage,
electric shock or even a fire accident.
Please check the grounding protection status
regularly. Do not operate if you think that the
protection measures such as grounding protection
and fuses are not perfect.
Ventilation holes on the product housing must be
kept clear to avoid malfunctions due to high
temperatures, abnormal operation, shortened life
and fire.
Please strictly follow the instructions in this manual,
otherwise the product's protective device may be
damaged.
VI
Don’t use the instrument if it is found damaged or
deformed at opening of package.
Prevent dust, wire end, iron fines or other objects
from entering the instrument during installation,
otherwise, it will cause abnormal movement or
failure.
During operation, to modify configuration, signal
output, startup, stop, operation safety shall be fully
considered. Operation mistakes may lead to failure
and even destruction of the instrument and
controlled equipment.
Each part of the instrument has a certain lifetime,
which must be maintained and repaired on a
regular basis for long-time use.
The product shall be scrapped as industrial wastes,
to prevent environment pollution.
When not using this product, be sure to turn off the
power switch.
If you find smoke from the product, smell odor,
abnormal noise, etc., please turn off the power
switch immediately and contact the company in
time.
VII
Disclaimer
The company does not make any guarantees for the
terms outside the scope of this product warranty.
This company is not responsible for damage to the
instrument or loss of parts or unpredictable damage
caused directly or indirectly by improper operation of
the user.
Package contents
No.
Item Name
Quantity
Remarks
1
Signal calibrator
1
2
Test lead
3
One for each color:
red, black and
yellow
3
Manual
1
4
Certificate
1
After opening the box, please confirm the package contents
before starting the operation.If you find that the model and
quantity are incorrect or there is physical damage in
appearance, please contact us.
VIII
Contents
Chapter 1 Overview........................................................................ 1
1.1 Introduction..................................................................1
1.2 Functions..................................................................... 1
1.3 Parameter....................................................................2
1.4 Specifications.............................................................. 4
Chapter 2 Component and functions............................................ 5
2.1 Terminal....................................................................... 6
2.2 Navigation button........................................................6
2.3 LCD display................................................................. 8
Chapter 3 Signal output.................................................................. 9
3.1 Voltage and Active Current........................................9
3.2 4-20 mA....................................................................... 9
3.3 Thermocouple...........................................................10
3.4 Resistance/Thermal Resistance............................ 11
3.5 Passive Current........................................................ 11
3.6 Output or Measurement of Voltage and Current
Signals based on Display Range (Free from Range
Conversion)..................................................................... 12
Contents
IX
Chapter 4 Signal Measurement...................................................14
4.1 Voltage and Active Current..................................... 14
4.2 Passive Current........................................................ 15
4.3 Resistance/Thermal Resistance............................ 17
4.4 Thermocouple...........................................................17
4.5 Regulating Valve...................................................... 19
Chapter 5 Programmable Output................................................ 20
5.1 Split Output Function (n/m)..................................... 20
5.2 Linear Output Function............................................ 21
5.3 Automatic Stepping Function.................................. 22
Chapter 6 Troubleshooting and maintenance........................... 24
6.1 Troubleshooting........................................................ 24
6.2 Maintenance............................................................. 25
Table of contents
