Superlux E309D PRO User manual

E361

CONTINUOUSLY VARIABLE

PATLEM GOOSENECK MICROPHONE

E309D PRO

HIGH QUALITY CONDENSER

GOOSENECK MICROPHONE

Contact

Marketing and sales

Superlux Taiwan

+886-2-26931323

[email protected]

Manufacturing & logistics

Superlux Enterprise

Development ( Shanghai ) Co., Ltd.

English

GENERAL DESCRIPTION

E309D PRO Miniature Gooseneck Microphone delivers

the professional features needed to achieve optimum

speech pickup in board meetings, conferences, pre-

sentations, houses-of-worship and more. The E309D

PRO features a highly sensitive condenser capsule and

is available in a cardioid, super-cardioid or omni-direc-

tional pickup pattern for maximum flexibility and control.

The three model numbers for E309D PRO with different

capsule are as bellow:

E309DU PRO with incorporated cardioid capsule

E309DH PRO with incorporated supercardioid capsule

E309DO PRO with incorporated omni-directional capsule

The E361 is a condenser gooseneck microphone with a

continuously-variable pickup pattern achieved by its dual

capsule design. The variable pattern control is selected

by the button on its base, making the E361 flexible for a

variety of applications.

E361

E309D PRO

CONTINUOUSLY VARIABLE

PALTEM GOOSENECK MICROPHONE

HIGH QUALITY CONDENSER

GOOSENECK MICROPHONE

FEATURES

• High quality condenser capsule

• Durable, high quality gooseneck structure

• Integrated programmable stand

• Selectable capsules from cardioid, super-cardioid and

omni- directional for E309D PRO only

• E361 features dual capsule design and continuously

variable pattern RF immunity

APPLICATIONS

• Conference room

• Board meetings

• Presentations

• Houses-of-worship

Both the E309D PRO and E361 feature a brand-new

design in a high-quality gooseneck. They are immune

to radio-frequency (RF) interference from cell phones,

PDAs, wireless internet devices, two-way radios, etc. An

On/Off switch doubles as a power LED, providing status

indication. The integrated desk stand features a pro-

grammable membrane switch. The base features both a

3-pin XLR male output connection and a 4-pin connector

to allow a hard-wired cable to be led out from either the

bottom or the rear of the base.

E361 FREQUENCY RESPONSE

143.0mm

[5.630in]

Ø16.0mm

[0.630in]

465.17mm

[18.314in]

Ø6.0mm

[0.236in]

Ø7.3

[0.287in]

Ø8.0mm

[0.315in]

44.6mm

[1.756in]

123.0mm

[4.843in] Unit: mm/inch

E309D PRO FREQUENCY RESPONSE

Unit: mm/inch

143.0mm

[5.630in]

Ø11.5mm

[0.453in]

Ø6.0mm

[0.236in]

Ø7.3mm

[0.287in]

Ø8.0mm

[0.315in]

44.6.0mm

[1.756in] 445.21mm

[17.528in]

123.0mm

[4.843in]

Specications

Transducer Back Electret

Polar Pattern Dual capsule design with continuously

variable polar pattern

Frequency Response 80~18,000 Hz

Dynamic Range 107 dB

Signal-to-Noise Ratio 81 dB

Equivalent Noise Level 15 dB

Max. SPL 120 dB SPL

Sensitivity - 31 ± 2 dBV/Pa

Finish Matte-black

Power Requirement P48, 8.6 mA

Output Impedance 200 ohms

Connector 3-pin XLR male jack

Net Weight 943 g (33.3 oz)

*1Pa=10 microbars=94dB SPL

*Note:Specications are subject to change.

E361

CONTINUOUSLY VARIABLE

PALTEM GOOSENECK MICROPHONE

Specications

Transducer Back Electret

Polar Pattern E309D PRO: Select from 3 capsules: car-

dioid, supercardioid and omni-directional.

Frequency Response 20~20,000 Hz

Dynamic Range 105 dB

Signal-to-Noise Ratio 75 dB

Equivalent Noise Level 19 dB

Max. SPL 124 dB

Sensitivity - 38 ± 2 dBV/Pa

Finish Matte-black

Power Requirement P48, 5.5mA

Output Impedance 200 ohms

Connector 3-pin XLR male jack

Net Weight 938 g (33.1 oz)

*1Pa=10 microbars=94dB SPL

*Note:Specications are subject to change.

*The three model numbers are as bellow:

E309DU PRO with incorporated cardioid capsule

E309DH PRO with incorporated supercardioid capsule

E309DO PRO with incorporated omni-directional capsule

E309D PRO HIGH QUALITY CONDENSER

GOOSENECK MICROPHONE

Operational Settings

Programmable Membrane Switch

Both E309D PRO and E361 integrate a low-profile micro-

phone base and require a phantom power supply. Their

base provides a soft touch button that can be congured

for “push-to-talk”, “push-to-mute” or “toggle on-and-off” op-

eration through the dip switch on the bottom.

1. Push-to-talk: The microphone is normally muted. Pushing

and holding the soft touch button will turn the micro-

phone on. As soon as the operator stops holding the soft

touch button, the microphone will return to mute.

2. Push-to-mute: The microphone is normally on. Pushing

and holding the soft touch button will mute the micro-

phone. As soon as the operator stops holding the soft

touch button, the microphone will again turn on.

3. Toggle / Power Up ON: As soon as phantom power is

applied to the base, the microphone is on. Momentarily

pressing the soft touch button will mute the microphone.

Momentarily pressing the soft touch button again will turn

the microphone on. This operation will repeat indenitely

4. Toggle / Power Up OFF (Muted): As soon as phantom

power is applied to the base, the microphone is muted.

Momentarily pressing the soft touch button will turn the

microphone on. Momentarily pressing the soft touch but-

ton again will mute the microphone. This operation will

repeat indenitely.

For the E361 gooseneck microphone, there is a continuous-

ly variable pattern control located on the bottom which can

change the microphone pickup pattern from omni- direc-

tional to gure-8.

Connection

Users may use an audio cable terminated with a profes-

sional 3-pin XLR type connector to send a balanced audio

signal to a microphone preamp, or a three-conductor

cable with one open end and the other terminated with a

professional 3-pin male XLR type connector. If an audio

cable terminating in XLR connectors on both ends is used,

it can simply be plugged in to the built-in XLR jack at the

back of the base. If a hard-wired installation is preferred,

a three-conductor cable with an open end can be directly

attached to the base following the instructions below; this

cable can be led out from the bottom, or from the back if

preferred.

1. Determine whether the cable is to be led out from the

bottom or the rear of the base.

2. If from the bottom, then rst of all, open the rectangular

plastic panel on the bottom. The 4-pin connector will be

visible. Insert the open end of the cable into the hole

located at the center of the bottom and feed the cable

end into the 4-pin connector recess. Connect the wires

according to the pin assignment below.

3. If the wire is to be led out through the rear of the base,

then first of all, open the rectangular plastic panel on

the bottom to expose the 4-pin connectors. Remove the

small rubber cover from the hole at the back of the base

and feed the open end of the cable through this hole

This manual suits for next models

Table of contents

Other Superlux Microphone manuals

Popular Microphone manuals by other brands

IK Multimedia

IK Multimedia iRig Stream MIC PRO user manual

DAPAudio

DAPAudio RM-101 user manual

AKG

AKG CHM 21 User instructions

Sennheiser

Sennheiser evolution wireless series EM 100 instruction manual

Sony

Sony C-48 operating instructions

GIGAMEDIA

GIGAMEDIA GGM PAMICUHFG user manual

Shure

Shure WH30TQG user guide

auna PRO

auna PRO MIC-900 manual

AKG

AKG D 3800 User instructions

Shure

Shure KSM141 user guide

MAIIN SOUND

MAIIN SOUND IIN style instruction manual

Earthworks

Earthworks TC25 user manual

Sennheiser

Sennheiser evolution D1 user manual

Alesis

Alesis MicLink Wireless user guide

DSPPA

DSPPA D6234 manual

Monacor

Monacor IMG STAGELINE ECM-300B manual

Ansr Audio

Ansr Audio Scan16 user manual

Shure

Shure MXA710 Series user guide