Super Vac V20-BL User manual

READ THIS FIRST

VENTILATOR USER GUIDE MODEL V20-BL

POSITIVE PRESSURE VENTILATOR

V20-BL PPV UserRevised 11-2022

USER GUIDE

This manual covers the description, cautions, operation, and maintenance of the Super Vac V20-BL.

Read this manual before operating the ventilator.

Save this guide for future reference.

CONTENTS

1. BREAKAGE OR DAMAGE DURING SHIPMENT ........................................................................................................... 2

2. GENERAL DESCRIPTION AND SPECIFICATIONS......................................................................................................... 3

3. PRODUCT SAFETY PRECAUTIONS ........................................................................................................................... 3

4. BEFORE OPERATING VENTILATOR ........................................................................................................................... 4

5. OPERATION ........................................................................................................................................................... 5

6. CHARGING THE BATTERY PACKS............................................................................................................................. 6

7. MAINTENANCE AND REPAIR.................................................................................................................................... 6

8. WARRANTY............................................................................................................................................................ 7

9. CONTACT INFORMATION......................................................................................................................................... 8

10. PARTS LIST ........................................................................................................................................................... 9

11. EXPLODED VIEW.................................................................................................................................................. 10

POSITIVE PRESSURE VENTILATOR

V20-BL PPV User Revised 11-2022

1. Breakage or Damage During Shipment

The transportation company is fully responsible for all shipping damage and will resolve problems promptly if you handle it correctly.

Please read these instructions carefully.

Examine the contents of all shipping cases. If you ﬁnd any damage, call your transportation agent at once and have them make a

description on the freight or express bill describing the damage and the number of pieces. Then write us and we will send you the

original bill of lading. Get a claim blank from the express or truck company. Fill the claim form out. Attach the claim blank to the

original bill of lading together with a copy of our invoice. Attach a memo on which you show the value of the damaged goods. Mail or

hand these papers to your local transportation agent. They will process your claim with reasonable promptness.

Please note, we cannot and will not enter claims for damages. If we ﬁled claim here, it would be sent to your local freight agent for

veriﬁcation and investigation. This time can be saved by your ﬁling the claim directly. Every consignee is on the ground ﬂoor and in

contact with the local agent who inspects the damaged goods, and thus, each claim can be given individual attention.

Since our goods are packed to comply with the regulations of all railroad, truck, and express companies, we cannot allow deduction

from any invoice because of any damage, however, be sure to ﬁle your claim promptly. Our goods are sold F.O.B. factory. We take

receipt from the transportation company certifying that the goods were delivered to them in good order, and our responsibility

ceases.

It is seldom that any breakage or damage occurs in any of our shipments, and in no case will the customer be out any expense if they

follow the above instructions.

Be sure to keep all damaged goods subject to examination of the truck or express company inspector, who may call on you sometime

later. These damaged goods, of course, will belong to them, and they will inform you what to do with them. If you dispose of these

damaged goods, your claim may not be paid.

POSITIVE PRESSURE VENTILATOR

V20-BL PPV UserRevised 11-2022

2. General Description and Specications

Super Vac ventilators are speciﬁcally designed to provide a convenient and portable source of air. Super Vac positive pressure

ventilators are tested to AMCA Standard 240-15, for use in extreme conditions.

Model # RPM Motor H x W x D Weight

V20-BL 2000 1 HP Variable Speed DC 28.25" x 28.75" x 12.5" 62 lbs

Specications are subject to change without notication. Refer to model decal afxed to ventilator to determine actual specications.

This ventilator is designed for high powered air movement. Super Vac’s propeller produces a greater intake of air and reduces turbulence at

the tips. Each blade is dynamically balanced for high efﬁciency and long life.

3. Product Safety Precautions

• Wear eye and ear protection when operating the ventilator.

• Never operate ventilator while fatigued.

• Do not disassemble or modify the ventilator in any way. Doing so may lead to mechanical failure or personal injury.

• Do not wear loose clothing that could become entangled in the operating ventilator.

• Never permit anyone to operate ventilator without proper instruction.

• Do not operate ventilator without proper inlet or outlet guards in place. If guards are missing or damaged, contact factory for

replacements.

• Do not place ﬁngers or other foreign objects through inlet or outlet guards. Should a foreign object enter the ventilator, immediately stop

motor. Be certain all mechanical motion has stopped. Do not use with any power voltage other than the indicated voltage.

• Never handle energized power cords with wet hands.

• Do not place or operate ventilator on unsteady tables, slanted surfaces or other unstable surfaces. Never use this ventilator in any

explosive environment.

• Never let extension cords or plug connections lay in water. Locate the ventilator so that it cannot fall into water inadvertently.

POSITIVE PRESSURE VENTILATOR

V20-BL PPV User Revised 11-2022

4. Before Operating Ventilator

• This ventilator will work with any M18 battery from the Milwaukee brand.

• A complete inspection of the ventilator should be made prior to operation.

• Check all threaded fasteners for proper tightness.

• Check ventilator inlet and outlet guards for obstructions. Check and remove from immediate surrounding area any objects that could be

drawn into the ventilator intake.

• Replace damaged or missing guards before operating ventilator.

• Never store or carry the battery pack so that metal objects can contact exposed battery terminals. Transporting batteries can possibly

cause ﬁres if the

• battery terminals contact loose nails, screws, keys, hand tools and the like.

• If using shore or mains power:

o Never use power cords with frayed, cut, or brittle insulation.

o Inspect power cord plug for proper connections to the ground fault interrupter circuit.

21 ft 18 ft 15 ft 12 ft 9 ft 6 ft 3 ft 0

6.4 m 5.5 m 4.6 m 3.7 m 2.7 m 1.8 m 0.9 m

13,000

12,000

11,000

10,000

9,000

8,000

7,000

6,000

5,000

AMCA 240 Airow (CFM)

Setback (ft, m)

12,200

MAXIMUM

AIRFLOW

25º20º15º5º 10º 30º

11,500

12,000

12,500

10,500

Airow vs Setback

POSITIVE PRESSURE VENTILATOR

V20-BL PPV UserRevised 11-2022

5. Operation

• Use caution not to direct toxic fumes into conﬁned spaces with the ventilator.

• Insert a Milwaukee M18 battery until it clicks. Only one battery is necessary for operation.

• Battery removal will get easier with more remove/replace cycles. The Battery Adapter & M18 Battery interface is required by Milwaukee.

• Fan will need to be reset (turned off & on) if a new battery is inserted.

• If fan is not reset, then the fan will not recognize the new battery and run until previous battery is empty.

• If using shore (mains) power, use an extension cord to connect to 110 – 240V AC.

• Press and hold power button until blue backlight indicates powering up.

• When the fan is on, it will need to run at the minimum speed allowed by Milwaukee. (This feature is to protect the batteries from small

parasitic draws)

• Turn speed control clockwise until desired speed is reached.

• Power button will indicate approximate power left. (It is normal for colors to ﬂicker back and forth if 2 batteries are being used)

o Green: 50 - 100%

o Yellow: 20 - 50%

o Red: 0 - 20% (Low Battery Warning: Front Facing LED will also ﬂash if turned on)

• To turn off, press and hold power button until blue backlight shows.

Battery Run Times at Max Speed

*Runtimes dependent on air density,

temperature and age of batteries.

Test data shown taken at 5,000 ft

elevation, 25% RH, 70°F with new

batteries.

*Air density is primarily affected by

elevation, humidity and

temperature.

*At temperatures below freezing

expect battery life to decrease.

*Other M18 Batteries will operate

the fan, but at reduced runtimes.

POSITIVE PRESSURE VENTILATOR

V20-BL PPV User Revised 11-2022

6. Charging the Battery Packs

• Remove Milwaukee batteries from fan.

• Insert in Milwaukee M18 Charger. Use only Milwaukee brand chargers.

• When the battery pack temperature is outside the charging range

• (40-105°F or 5-40°C), the red light on the charger will ﬂash and the batterywill not charge.

• Once the battery pack is within the acceptable temperature range, normal

charging will take place.

• Using the Milwaukee SuperChargerTM, a 12Ah battery will recharge in 60 minutes and 8Ah

battery will recharge in 45 minutes.

• Other Milwaukee chargers, including units that work with vehicle DC power, may take longer to

fully charge the batteries.

• Do not store battery packs or

chargers above 120°F (50°C) or

in direct sunlight.

• Never use charger or batteries in

explosive atmospheres.

• Never attempt to open the battery

pack. If cracked or damaged,

return it to a service center for

recycling.

• Do not splash or immerse charger

in water or other liquids.

Maintenance should only be performed by experienced and trained personnel.

If you have any questions, contact Super Vac before attempting any maintenance at [email protected] or 1-800-525-5224.

7. Maintenance and Repair

Daily/After Each Use:

• Charge batteries completely

• Check that Guards are undamaged and

effectively prevent objects from contacting

the blade

• Wheels and feet are in place and tight

• Tilt Mechanism works properly

• If tilt adjust is too loose, tighten knurled

nut on the Tilt Mechanism.

• For larger adjustments, tighten nut with

9/16” (14mm) wrench.

Weekly/Monthly/Quarterly:

• Calibrate Battery

• Fully charging, then fully discharging,

and fully charging once again before

storage

• Replace battery (-ies) if battery shows

signs of damage from dropping or

excessive heat

• Check for loose fasteners

• Check condition of the power cord (if

purchased with Shore Power) (14mm)

wrench.

Yearly:

• Battery Condition

• Check runtime in low wind and average

temperature conditions

• If runtime is below 75% of advertised

runtime, replacing batteries is

recommended

• Excessive vibration

• Blade imbalance due to accumulation of

dirt on blade

• Check Blade interference

• Remove front guard and rotate manually

to check for interference

To-Do Checklists:

POSITIVE PRESSURE VENTILATOR

V20-BL PPV UserRevised 11-2022

8. Warranty

Milwaukee products carry a separate 3-year limited warranty for the compatible battery packs and chargers. For more information, contact

them at www.milwaukeetool.com or 1-800-729-3878.

Super Vacuum Manufacturing Company warrants that the equipment is free from defects in materials and workmanship when used and

operated for a period of ﬁve years, excluding the motor which has a 3-year warranty. The responsibility of Super Vacuum Manufacturing

Company under this limited warranty is limited to the repair and replacement of any parts which are found defective and which are returned

to Super Vacuum Manufacturing Company at 3842 Redman Dr, Fort Collins, CO 80524 with transportation charges prepaid (C.O.D. shipments

will not be accepted).

Prior to returning defective parts to SUPER VACUUM MANUFACTURING COMPANY, the original purchaser shall make a claim in writing to

SUPER VACUUM MANUFACTURING COMPANY at the above address indicating the model number and type of defect. No parts or

equipment will be received by SUPER VACUUM MANUFACTURING COMPANY for repair or replacement under this warranty without

speciﬁc written authority from it in advance.

Any parts damaged by improper installation, overloading, abuse or accident of any type or cause are not covered by this warranty.

All equipment manufactured by us is pre-run and tested before leaving our plant and is shipped in good working order and condition. We

therefore extend to the original purchasers the following Limited Warranty for the period of ﬁve years from the original date of purchase:

1. This warranty does not apply to defects caused by accident, misuse, neglect, or wear and tear, nor can we be held responsible for incidental

and consequential expense and loss, nor does this warranty apply to equipment where alterations have been executed without our knowledge or

consent. These conditions are readily discernible when the equipment is returned to us for inspection.

2. On all component parts not manufactured by SUPER VACUUM MANUFACTURING COMPANY, their warranty is to the extent that the manufacturer

of such component warrants them to SUPER VACUUM MANUFACTURING COMPANY, if at all. Look in your local business phone directory for the

nearest repair station for the brand of parts you have or write to us for the address.

3. If equipment received is found to have been damaged in transit, a claim should be made against the carrier within three days, as we assume no

responsibility for such damage.

4. Any service other than our Authorized Service voids this warranty.

5. This warranty is in lieu of and is intended to exclude all other warranties, express or implied, oral or written, including any warranties of

MERCHANTABILITY or FITNESS for a particular purpose.

POSITIVE PRESSURE VENTILATOR

V20-BL PPV User Revised 11-2022

9. Contact

For parts or service information, contact:

Super Vacuum Manufacturing Company, Inc.

3842 Redman Dr.

Fort Collins, CO 80524

Phone: 800-525-5224

970-297-7100

Fax: 970-297-7099

Email : [email protected]

Internet: www.supervac.com

Table of contents

Other Super Vac Fan manuals

Super Vac

Super Vac V18-BK User manual

Super Vac

Super Vac SVU-50 User manual

Super Vac

Super Vac V18-EV User manual

Super Vac

Super Vac F164i User manual

Super Vac

Super Vac 730WT User manual

Super Vac

Super Vac 720GG User manual

Super Vac

Super Vac F200i User manual

Super Vac

Super Vac V20-BD User manual

Super Vac

Super Vac V18-BW User manual

Super Vac

Super Vac V20-EX User manual

Super Vac

Super Vac P200S User manual

Super Vac

Super Vac V20-GX User manual

Super Vac

Super Vac 716-EXP User manual

Super Vac

Super Vac 724EXP User manual

Super Vac

Super Vac V20-GB User manual

Super Vac

Super Vac V18-GB User manual

Super Vac

Super Vac P164S User manual

Super Vac

Super Vac 724BCB User manual

Super Vac

Super Vac V18-ES User manual

Super Vac

Super Vac 716WT User manual

Super Vac

Super Vac 718GC User manual

Super Vac

Super Vac 718-EXP User manual

Super Vac

Super Vac V18-BL User manual

Super Vac

Super Vac V16-BK User manual

Popular Fan manuals by other brands

ELTA FANS

ELTA FANS H03VV-F installation guide

Hunter

Hunter 20714 Owner's guide and installation manual

Emerson

Emerson CARRERA VERANDA CF542ORB00 owner's manual

Hunter

Hunter Caraway Owner's guide and installation manual

Panasonic

Panasonic FV-15NLFS1 Service manual

Kompernass

Kompernass KH 1150 operating instructions

VES

VES FALA100/12V/TR Original instructions

Vertiv

Vertiv Liebert DCD user manual

Westinghouse

Westinghouse GFP Series owner's manual

Venmar

Venmar KUBIX HRV PLUS Series user guide

Maico

Maico ECR 31 installation instructions

Sonnenkonig

Sonnenkonig Dinky instruction manual

S&P

S&P ECOWATT HXBR manual

Wider

Wider IMP03369BH instruction manual

Panasonic

Panasonic F-60DHN Operating and installation instructions

Hinkley

Hinkley HIGHLAND instruction manual

Broan

Broan 766BN installation guide

Premium

Premium PFS16022 Use manual