SunSynk SUNSYNK-3.6K-SG01LP1 User manual

v.19 (12/09/22)

USER MANUAL

SUNSYNK-3.6K-SG01LP1 / SUNSYNK-3.6K-SG01LP3

SUNSYNK-3.6K-SG02LP1

SUNSYNK-5K-SG01LP1 / SUNSYNK-5K-SG01LP3

Global Tech China Ltd, 3 Floor, Wai Yip Industrial Building.

171 Wai Yip Street, Kwun Tong, Kowloon, Hong Kong.

Tel: +852 2884 4318 Fax: +8522884 4816

www.sunsynk.com / [email protected]

HYBRID PARITY

(SUPER) INVERTER

HYBRID INVERTER | Installer Manual2

Table of Contents

1. SAFETY 5

1.1. General Safety 5

1.2. Symbols 5

1.3. Safety Instructions 6

1.4. Disposal 6

2. PRODUCT INTRODUCTION 7

2.1. Product Size 9

2.2. Basic System Architecture 10

3. TECHNICAL SPECIFICATIONS 11

4. INSTALLATION 14

4.1. Parts List 14

4.2. Selecting the Mounting Area 15

4.3. System Diagram 15

4.4. Mounting the Inverter 16

4.5. Battery Connection 17

4.5.1. Recommended DC Battery Protection 19

4.6. Connecting a Lithium Battery 19

4.7. Battery Temperature Sensor Connection 20

4.8. Connecting the AC 22

4.8.1. Recommended AC Surge Protector 23

4.9. Installing the CT Coil 24

4.10. Earth Connection (MANDATORY) 25

4.11. Meter Connection 26

4.11.1. System Connection for the CHNT Meter 26

4.12. Wiring System for Inverter 27

4.13. PV Connection 28

4.13.1. PV Module Selection 28

4.13.2. PV Module Wiring 28

4.14. PV Protection 29

4.15. Typical Application Diagram of Diesel Generator 29

4.16. Single-Phase Parallel Connection Diagram 30

4.17. Three-Phase Parallel Inverter 31

HYBRID INVERTER | Installer Manual3

5. OPERATION 32

5.1. Display 32

5.2. Switching ON/OFF 32

5.3. Home Page 33

5.4. Status Page 33

5.5. System Flow Page 34

5.6. Setup Page 35

5.7. Set Time (Clock) 36

5.8. Set Company Name / Beeper / Auto dim 36

5.9. Factory Reset and Lock Code 37

5.10. Battery Setup Page 38

5.11. Generator & Battery Page 39

5.12. Battery Discharge Page 41

5.13. Setting Up a Lithium Battery 43

5.14. Program Charge & Discharge Times 48

5.15. Grid Supply Page 50

5.16. Connecting the DRM’s 51

5.17. Advanced Settings for Paralleling Inverters 52

5.18. Solar Power Generated 55

5.19. Grid Power 55

5.20. Advanced Settings for Wind Turbines 56

5.21. Advanced Settings for Auxiliary Load 57

5.22. Advanced Settings for Peak Shaving 58

5.23. Fault Codes 59

6. COMMISSIONING 62

6.1. Start-Up / Shutdown Procedure 62

6.2. Information for Commissioning the Inverter 62

6.3. GDFI Fault 63

7. MAINTENANCE 63

APPENDIX A 64

APPENDIX B 65

APPENDIX C 65

HYBRID INVERTER | Installer Manual4

APPENDIX D 65

APPENDIX E 65

HYBRID INVERTER | Installer Manual5

1. SAFETY

This device should only be used in accordance with the instructions within this manual and in

compliance with local, regional, and national laws and regulations. Only allow this device to be installed,

operated, maintained, and repaired by other person(s) who have read and understood this manual.

Ensure the manual is included with this device should it be passed to a third party.

DO NOT allow minors, untrained personnel, or person(s) suering from a physical or mental impairment

that would aect their ability to follow this manual, install, maintain or repair this device.

Any untrained personnel who might get near this device while it is in operation MUST be informed that it

is dangerous and instructed carefully on how to avoid injury.

1.1. General Safety

1.2. Symbols

WARNING This symbol indicates information that if ignored, could result in personal

injury or even death due to incorrect handling.

CAUTION This symbol indicates information that if ignored, could result in personal

injury or physical damage due to incorrect handling.

PLEASE NOTE Indicates information that is considered important, but not hazard-related.

HYBRID INVERTER | Installer Manual6

1.3. Safety Instructions

Be sure to read this manual thoroughly before installation.

Do not attempt to install the inverter by yourself. Installation work must be carried out in compliance

with national wiring standards and by suitably qualied personnel only. Do not turn on the power until all

installation work is complete.

Do not disassemble the inverter. If you need repair or maintenance, contact a professional service

centre.

Always use an individual power supply line protected by a circuit breaker and operating on all wires with

a distance between contacts of at least 3mm for this unit.

The unit must be correctly grounded, and the supply line must be equipped with a suitable breaker and

RCD to protect people.

Disconnect all wires/cables before performing any maintenance or cleaning to reduce the risk of

electrical shock.

The unit is not explosion-proof, so it should not be installed in an explosive atmosphere.

Never touch electrical components immediately after the power supply has been turned o since the

system can still have residual energy, so an electric shock may occur. Therefore, after turning o the

power, always wait 5 minutes before touching electrical components.

This unit contains no user-serviceable parts. Always consult an authorised contractor for repairs.

1.4. Disposal

DO NOT dispose this product with domestic waste!

Electrical devices should be disposed of in accordance with regional directives on electronic and/ or

electronic-waste disposal. In case of further questions, please consult your supplier. In some cases, the

supplier can take care of proper disposal.

WARNING

HIGH LIFE RISK DUE TO FIRE OR ELECTROCUTION.

Sunsynk Single-Phase Hybrid Inverter can only be installed by a qualied licensed electrical

contractor. This is not a DIY product.

HYBRID INVERTER | Installer Manual7

2. PRODUCT INTRODUCTION

The Sunsynk Single-Phase Hybrid Inverter is a highly ecient power management tool that allows the user

to hit those ‘parity’ targets by managing power-ow from multiple sources such as solar, mains power (grid),

and generators, and then eectively storing and releasing power as and when utilities require.

INTERACTIVE

Easy and simple to understand display

Supporting Wi-Fi or GSM monitoring

Visual power ow screen

Smart settable 3-stage MPPT charging for optimized battery performance

Auxiliary load function

Parallel / multi invert function grid-tied and o-grid

COMPATIBLE

Compatible with main electrical grid voltages or power generators

Compatible with wind turbines

220V single phase, pure sine-wave inverter

Self-consumption and feed-in to the grid

Auto restart while AC is recovering

Auto earth bond feature (Via a relay)

CONFIGURABLE

Fully programmable controller

Programmable supply priority for battery or grid

Programmable multiple operation modes: on-grid/o-grid & UPS

Congurable battery charging - current/voltage based on applications by LCD setting

Congurable AC / solar / generator charger priority by LCD setting

SECURE

Overload/over-temperature/short-circuit protection

Smart battery charger design for optimized battery protection

Limiting function installed to prevent excess power overow to grid

APPLICATIONS

Marine (vessel power management)

Power shedding (home/oce/factory)

UPS (fuel-saving systems)

Remote locations with solar and wind generators

Building sites

Military locations

Telecommunication

HYBRID INVERTER | Installer Manual8

1. Inverter Indicators 8. Parallel Port 15. DC Switch

2. LCD Display 9. Function Port 16. PV Input with Two MPPT

3. Function Buttons 10. RS 485 Port 17. Battery

4. Battery Input Connectors 11. Generator Input 18. Temperature Sensor

5. BMS 485 Port 12. Load 19. Wi-Fi Interface

6. BMS CAN Port 13. Grid 20. Fan (not included in all inverters)

7. DRMs Port 14. Power On/O Button

19 20

8ON

1 2

HYBRID INVERTER | Installer Manual9

2.1. Product Size

Inverter Size

Mounting bracket

HYBRID INVERTER | Installer Manual10

2.2. Basic System Architecture

The following illustration shows the basic application of this inverter.

It also includes the following devices to have a Complete running system.

Generator or Utility

PV modules

Consult with your system integrator for other possible system architectures depending on your

requirements

This inverter can power all kinds of appliances in a home or one environment, including motor-type

appliances such as refrigerators and air conditioners

When no PV is connected, the inverter can be used for just UPS functionality.

Other manuals for SUNSYNK-3.6K-SG01LP1

This manual suits for next models

Table of contents

Other SunSynk Inverter manuals

SunSynk

SunSynk SUN-8K-SG04LP3 User manual

SunSynk

SunSynk FSPKL2N User manual

SunSynk

SunSynk SUN-3.6K-SG01/03LP1-EU User guide

SunSynk

SunSynk SYNK-16K-SG01LP1 User guide

SunSynk

SunSynk SUNSYNK-10K-SG02LP1 User manual

SunSynk

SunSynk SYNK-7K-SG05LP1 User manual

SunSynk

SunSynk SUNSYNK-L5.1 User manual

SunSynk

SunSynk LoadShedder SM2.5kWLS User manual

SunSynk

SunSynk LIFELYNK ALL-IN-ONE User guide

SunSynk

SunSynk Hybrid Parity User guide

SunSynk

SunSynk SUN-8.0 User manual

SunSynk

SunSynk SUN-8K-SG04LP3 User guide

SunSynk

SunSynk ECCO SUN-3K-SG04LP1-24-EU User manual

SunSynk

SunSynk Power Bank 1000 User manual

SunSynk

SunSynk BB-300 User manual

SunSynk

SunSynk SUNSYNK-8K-SG01LP1 User guide

SunSynk

SunSynk SUNSYNK-8K-SG01LP1 User manual

SunSynk

SunSynk Life3.5Hyb02 User guide

SunSynk

SunSynk SYNK-8K-SG04LP3 User guide

SunSynk

SunSynk SUNSYNK-3.6K-SG01/03LP1 User guide

SunSynk

SunSynk SUNSYNK MAX User manual

SunSynk

SunSynk SUN-8K-SG04LP3 User guide

SunSynk

SunSynk SUN-25K-SG01HP3-EU-BM2 User guide

SunSynk

SunSynk SUN-25K-SG01HP3-EU-BM2 User guide

Popular Inverter manuals by other brands

Fourgroup

Fourgroup Easy use and Programming Handbook

Velleman

Velleman PI300M user manual

Sungrow

Sungrow SG350HX-US user manual

WilTec

WilTec 61897 Operation manual

SMA

SMA SUNNY BOY STORAGE 2.5 Quick reference guide

Simplicity

Simplicity LANDLORD 316 product manual

Santak

Santak SMAX 3000 user manual

ATON

ATON RA.Store-3 user manual

ZIEHL-ABEGG

ZIEHL-ABEGG FXET4AMQ operating instructions

Tektronix

Tektronix CFG250 Operator's manual

Champion

Champion 200989 Operator's manual

Vanner

Vanner 20-500 Series owner's manual

GE GEP user manual

Astrel Group

Astrel Group Power Reducer Installation and instruction manual

MULTIQUIP

MULTIQUIP GDP-5H Operation and parts manual

GoWISE

GoWISE PS1007 user manual

Promate

Promate PM13500D ES Operator's manual

Mastervolt

Mastervolt WHISPER 3.5M3000 RPM user manual