SUNRICH TECHNOLOGY M-410 User manual
4x1 HDMI Switch
User Manual
Ver. 1.00
All brand names and trademarks are properties of their
respective owners.
MN8000100002 Page2
Features and Specification
Four HDMI inputs, one HDMI output
HDMI 1.3b compatible
On-board equalizer which allows data transmission on long
cables
Supports signal rate up to 2.25Gbps
Supports 12-bit Deep Color 1080p
HDCP compliant
Easy installation
Handy front panel button to switch between inputs
LED indicators
Metal case
Package Contents
One 4x1 HDMI Switch
One Power Adapter
One User Manual
Mounting ears (optional)
Note: Contents may vary depending on country/market.
MN8000100002 Page3
Hardware Layout
Figure 1. Front Panel Layout
Input Select Button: Press this button repeatedly to cycle
through to the desired input device
Power LED: This LED indicator will become active when the
HDMI splitter is powered on
Input Device LED (1-4): This LED indicator will become active
when a link with HDMI source device is established on the
corresponding input port
Select Device LED (1-4): This indicates which input port is
currently selected as output
MN8000100002 Page4
Figure 2. Rear Panel Layout
Power On/Off Switch: Power on/off the HDMI splitter
Power Jack: Connect to the included power adapter
HDMI Output Port: Connect to a valid HDMI capable device to
this HDMI output port. The currently selected HDMI input
source device will be output through this HDMI output port.
HDMI Input Port (1-4): Connect up to 4 HDMI source device
to these HDMI input ports
MN8000100002 Page5
Hardware Installation
1. Connect a HDMI cable between the output port of the HDMI
switch and any input port of the HDTV or display.
2. Connect any HDMI media devices to the input ports of the HDMI
switch.
3. Plug the power adapter into the power jack of the HDMI switch.
4. Plug the power adapter into a reliable power outlet.
5. Turn on the power switch, and ensure that the power LED
indicator is active.
Table of contents
Other SUNRICH TECHNOLOGY Switch manuals
