Sunnydaze QX-047 User manual
STEEL LOG RACK BRACKET KIT
QX-047
Page 1 / 2
Thank you for choosing Sunnydaze Decor. We stand behind our brand and the quality of the items we sell.
Replacement parts or products will be sent at our discretion within the 1-year warranty period. Proof of purchase, with
the date of purchase as well as photos of the merchandise defect, must be provided. Photos are used to determine
the cause of defects and for future quality control. Register your warranty at https://tiny.cc/SunnydazeWarranty
If you have any questions, comments or concerns, feel free to contact us by phone at 833-982-1977, by email:
customerservice@sunnydazedecor.com, or via our contact us page at https://tiny.cc/SunnydazeContact
Purchase Date: / / Order/Customer Reference Number:
ABracket 2
BEnd Plate 2
CM4x25mm Screw 32
DSealing Strip 1
CHOKING HAZARD — This item
contains small parts that can be
swallowed. Keep children and pets
away during assembly.
WARNING
SLRB-ACCS 02/2022
(not included)
2x4 Lumber
Power Drill with
Phillips Drill Bit
Scissors
Tape Measure
Safety Glasses
WARNING:Manufacturer and seller expressly disclaim any and all liability from personal injury,
property damage or loss, whether direct or indirect, or incidental, resulting from the incorrect attachment,
Inspect packaging to ensure all
parts are accounted for before
disposing of packing materials.
NOTE: Lumber (not included) is
nominal size and may need to be planed
or sanded to t inside the bracket slots.
Page 2 / 2
SLRB-ACCS
STEP 1
A: 2
D: 1
STEP 2
C: 8
STEP 3
C: 16
STEP 4
B: 2
C: 8
02/2022
TIP:
Carefully
measure
sealing strip
before cutting.
Review all information and understand assembly before beginning.
TIPS:
Drive screws at a low speed.
Ensure screws are installed straight.
If the screws are not penetrating
your lumber, drill a pilot hole.
IMPORTANT: Ensure all screws are securely
fastened before use. Periodically check and
tighten screws as necessary.
Lumber not included.
Lumber not included. Lumber not included.
HELPFUL HINTS
Lumber required (not included): two equal pieces for the length of the rack, four pieces for the height of the rack.
Additional brackets or bracing (not included) may be required for vertical lumber that is taller than 4 feet.
Lumber is nominal size and may need to be planed or sanded to t inside the bracket slots.
Do not use lumber that is cracking or checking (splits in the length of the wood).
Other Sunnydaze Rack & Stand manuals
Popular Rack & Stand manuals by other brands
Salamander
Salamander Acadia AC/W/L400/WH Assembly instructions
Fohhn
Fohhn VAT-09 Mounting instruction
ricoo
ricoo FS0522 quick start guide
AMSOIL
AMSOIL BMK-22 Installation and service instructions
Kargo Master
Kargo Master 48220 installation guide
Milestone AV Technologies
Milestone AV Technologies SIMPLICITY SLF2 installation instructions
