Sunny P8000 User manual
PINK ADJUSTABLE TWIST STEPPER
P8000
USER MANUAL
IMPORTANT: Read all instructions carefully before using this product. Retain
owner’s manual for future reference. For customer service, please contact:
IMPORTANT SAFETY INFORMATION
We thank you for choosing our product. To ensure your safety and health, please use this
equipment correctly. It is important to read this entire manual before assembling and using the
equipment. Safe and effective use can only be assured if the equipment is assembled,
maintained, and used properly. It is your responsibility to ensure that all users of the equipment
are informed of all warnings and precautions.
1. Before starting any exercise program you should consult your physician to determine if
you have any medical or physical conditions that could put your health and safety at
risk or prevent you from using the equipment properly. Your physician’s advice is
essential if you are taking any medication that may affect your heart rate, blood
pressure, or cholesterol level.
2. Be aware of your body’s signals. Incorrect or excessive exercise can damage your
health. Stop exercising if you experience any of the following symptoms: pain,
tightness in your chest, irregular heartbeat, shortness of breath, lightheadedness,
dizziness, or feelings of nausea. If you do experience any of these conditions, you
should consult your physician before continuing with your exercise program.
3. Keep children and pets away from the equipment. The equipment is designed for adult
use only.
4. Use the equipment on a solid, flat level surface with a protective cover for your floor or
carpet. To ensure safety, the equipment should have at least 2 feet of free space all
around it.
5. Ensure that all nuts and bolts are securely tightened before using the equipment. The
safety of the equipment can only be maintained if it is regularly examined for damage
and/or wear and tear.
6. It is recommended that you lubricate all moving parts on a monthly basis.
7. Always use the equipment as indicated. If you find any defective components while
assembling or checking the equipment, or if you hear any unusual noises coming from
the equipment during exercise, stop using the equipment immediately and don’t use
the equipment until the problem has been rectified.
8. Wear suitable clothing while using the equipment. Avoid wearing loose clothing that
may become entangled in the equipment.
9. Do not place fingers or objects into the moving parts of the equipment.
10.The maximum weight capacity of this unit is 220 pounds.
11.This equipment is not suitable for therapeutic use.
12.Move with caution when lifting and moving the equipment. Always use proper lifting
technique and seek assistance if necessary.
13.Your product is intended for use in cool, dry conditions. You should avoid storage in
extreme cold, hot, or damp areas as this may lead to corrosion and other related
problems.
14.This equipment is designed for indoor use only. It is not intended for commercial use!
1
PARTS LIST
Part No.
Description
QTY
1
Main Frame
1
2
Tension Knob
1
2
ASSEMBLY INSTRUCTIONS
1. Remove the main frame from the box.
2. Lift one pedal up with your hands.
3. Ensure the cable is secured around the wheel as shown in the picture below.
4. Turn the Knob (No. 3) clockwise "+"all the way until it’s reached its furthest
point. The assembly is now complete!
TO ADJUST TENSION & STEPPING HEIGHT:
1. Turn the Knob counter-clockwise (to the left) to lessen the stepping range and tension
2. Turn the Knob clockwise (to the right) to increase tension and widen the stepping range.
3
MAINTENANCE AND CARE
Regular maintenance requires you to wipe the stepper clean after each use. Only use a
dry cloth when doing so. Always store your stepper in a dry, cool area. Do not leave
outdoors as prolonged exposure to weather/temperatures will cause damage to parts and
functions of the machine over.
NOTE: It's normal for sound to come from the cylinder as the cylinder gets hot during use.
Do NOT touch the cylinder during or after use to avoid burn injuries.
IF THE STEPPER STARTS TO SCREECH DURING EXERCISE:
1. Loosen the screw of the U-shaped bracket and cable
2. Lubricate the U-shaped bracket and the cable to improve the sliding condition (as seen
in the picture below).
3. After lubricating with oil, secure the U-shaped bracket and cable by tightening the screw.
NOTE: We recommend using a silicone based lubricant.
Cable
U-Shaped
Bracket
4
METER INSTRUCTIONS
KEY FUNCTIONS:
MODE: Press the red MODE button to select function (Time,
Rep/Min, Count, Calorie and Scan).
OPERATIONAL FUNCTIONS:
1. AUTO ON/OFF: If the stepper is put into motion or the MODE button is pressed, the meter
will activate and will remain active until it’s reached approximately 4 minutes without any
signal, which is when the meter will turn off automatically.
2. RESET: The meter can be reset by pressing and holding the MODE button for three
seconds. Removing the batteries will also reset the meter and return all functions back to
zero.
3. MODE: To select the LOCK MODE setting, press the MODE key when the pointer is on the
function you wish to lock. Once locked, only the selected function will be displayed.
FUNCTIONS:
TIME: Counts the total time of an exercise from start to finish.
CALORIES: Counts the amount of total calories burned during an exercise from start to
finish. COUNT: Accumulates the count of steps made during an exercise session.
REPS/MIN: Displays the count of steps per minute.
SCAN: Press the MODE button to until the arrow points to SCAN. Once on SCAN, the
display will scan through each of the functions consecutively.
NOTE:
1.If you have an inaccurate reading on the monitor, replace the battery immediately.
2.Use (1) LR44, 1.5V battery.
3.The monitor is auto-powered. It turns on when exercise begins, and it turns off when there
is no movement made in 4 minutes.
4.All functions will stop calculating when STOP appears in the upper left corner of the
display monitor. This occurs when there is no signal for a period of 4 seconds. Once the
exercise begins, the meter will start recalculating and the STOP will disappear.
NOTE: An additional LR44 battery is included with your manual. Replace the battery if
your new meter is not functioning due to battery drainage. See next page for instructions
on changing your battery.
5
HOW TO CHANGE THE BATTERY
Plastic cap
1) Remove the plastic cap from the battery.
2) Remove the battery using your hand or the tool provided.
3)Insert the new battery using your hand or the tool provided. Ensure that the positive side of the
battery (labeled with a +sign) is facing upward.
4) Place the plastic cap back onto the battery.
5) Connect the wire into the meter.
6) Attach the meter on Main Frame.
6
Table of contents
Other Sunny Stepper Machine manuals
