Sunhans SHFiM2-Lite User manual

SHFiM2-Lite Mesh Router

user Manual

Page - 26

For more information, please visit:

Or contact us via email:

www.sunhans.com

[email protected]

1.1 SHFiM2-Lite Router Front/Top View

your SHFiM2-Lite router web interface. You can know how to

describes how to manage your SHFiM2-Lite Wi-Fi System from

connects to your modem or gateway. The SHFiM2-Lite node

connections to your Internet service. The SHFiM2-Lite Router

The SHFiM2-Lite Wi-Fi System creates dedicated high-speed Wi-Fi

Page - 02 Page - 03

extends the Wi-Fi signal throughout your home. This manual

connect your mesh node.

1.Product OverviewNetwork

You can use the status lights on the front of the

mesh node to verify various conditions

Mesh and WAN are disconnected

Red solid

Mesh and WAN are connected

Blue solid

The node is resetting to factory default settings

Fast Blink Blue

Description

Status Light

Connect your SHFiM2-Lite router to a power Source. Connect the power

on your SHFiM2-Lite router. Note: If you want to connect your SHFiM2-Lite

1.3 SHFiM2-Lite Node Front/Top /Bottom View

1.2 SHFiM2-Lite Router Bottom View

Page - 04

2.Connect Your Router

Incoming connection from Internet Service

Provider (ISP) designated port or from modem

Wan Ethernet Port

LAN connection for your computer/device

Press and hold for 7 seconds and LED light will

blink in blue. Then it will turn o and restart the

router to factory setting. Wait for 30 seconds for

the restart process to nish or to be completed

Lan Ethernet Port

DC 12V 1.5A

DC Power Jack

Reset Button

You can use the status lights on the front of the

mesh nodeto verify various conditions.

Mesh disconnection

Red solid

Main mesh and node connection is fair

Fast Blink Red

The main mesh and node connection is good

The node is resetting to factory default settings

Blue solid

Description

Status Light

Fast Blink Blue

Status Light

Note: Dierent Area match dierent Specication Plug PIN.

2.1Connect your Router

1. Use the included Ethernet cable to connectyour modem to the Wan Ethernet

router to an existing gateway, we recommend that you turn o your existing

gateway’s Wi-Fi.

adapter to your router and plug the power adapter into an outlet.

Page - 05

3. Connect the other end of the Ethernet cable to SHFiM2-Lite router’s Ethernet

You can connect to the SHFiM2-Lite network through a wired or Wi-Fi connection.

SHFiM2-Lite router.

Move the SHFiM2-Lite node closer to the

The SHFiM2-Lite router and nodes failed to sync.

SHFiM2-Lite node closer to the SHFiM2-Lite router.

and SHFiM2-Lite node is fair. Consider moving the

The connection between the SHFiM2-Lite router

and SHFiM2-Lite node is good.

and the connection between the SHFiM2-Lite router

The SHFiM2-Lite router and Node successfully synced,

The SHFiM2-Lite Wi-Fi System includes an SHFiM2-Lite router and two nodes. the

1.Sync a node from an SHFiM2-Lite Wi-Fi System

SHFiM2-Lite Wi-Fi System.

2.3 Sync Your SHFiM2-Lite node

If your Node came with your SHFiM2-Lite Wi-Fi System, the node attempts to sync

Page - 06 Page - 07

2.2 Place Your Node

with your router automatically. If you bought an add-on node, you must manually

sync your node. Note that your node must be within range of your router’s Wi-Fi

signal in order to sync with the router. Use each nodes LED to help you determine

where to place your node.

The sync process for your node depends on whether your node came with your

nodes in the Wi-Fi system attempt to sync with your router automatically.

2. To sync your node

Place your node

Connect the node to a power outlet.

Waiting for about 2minutes, and observing the light status.

DescriptionStatus Light

Blue solid

Red solid

Fast Blink Red

3 Manual Setup & Advance setting

Connect to the Network

If you set up your computer to use a static IP address, change the settings so that

it uses Dynamic Host Conguration Protocol (DHCP).

3.1 Wired Connection

You can connect your computer to the router using an Ethernet cable and join

the router’s local area network (LAN).To connect your computer to the router

with an Ethernet cable:

1. Make sure that the router is receiving power (its Power LED is lit).

2. Connect an Ethernet cable to an Ethernet port on your computer.

port. Your computer connects to the local area network (LAN). A message

might display on your computer screen to notify you that an Ethernet cable is

connected.

name is the same for the router and the node in the SHFiM2-Lite Wi-Fi System.

Page - 08 Page - 09

3.2 Wi-Fi Connection

To nd and select the Wi-Fi network:

1. Make sure that the router or node is receiving power (its Power LED is lit).

2. On your Wi-Fi-enabled computer or mobile device, nd and select the Wi-Fi

network. The Wi-Fi network name is on the router label. The Wi-Fi network

3. Join the Wi-Fi network and enter the Wi-Fi password. The password is on the

router label. Your Wi-Fi-enabled computer or mobile device connects to the

Wi-Fi network.

3.3 Use a Web Browser to Access the Router

When you connect to the network (either with Wi-Fi or with an Ethernet cable),

you can use a web browser to access the router to view or change its settings.

The rst time you access the router, a Quick start guide displays.

1. Access your router with a Web Browser

Launch a web browser to access the router by 192.168.8.1，

When Log-in widow opens, enter password:1235678.

When Home page displays, select Networking Setting.Then you can begin to

setup your network.

2. Join the Wi-Fi network and enter the Wi-Fi password. The password is on the

router label. Your Wi-Fi-enabled computer or mobile device connects to the

Wi-Fi network.

4.Specify Your Internet Settings

4.1 Quick installation Guide

The quickest way to setup the router to use your Internet connection is to follow

the Quick installation Guide when you rst access the router with a web browser.

Before you start the setup process, get your ISP information and make sure that

the computers and devices in the network use the settings described here.

When your Internet service starts, your Internet service provider (ISP) typically

gives you all the information needed to connect to the Internet.

For DSL service, you might need the following information to set up your router:

The ISP conguration information provide for your DSL account

Fixed or static IP address settings (special deployment by ISP; this setting is rare)

If you cannot locate this information, ask your ISP to provide it. Then Click save.

Page - 11

Page - 10

and setting your Wi-Fi name and password, Click save.

If you connect your internet by wired cable , you can back to Mesh interface and

check Status , if wan port have parameter，you can surf the internet. Or if you

connect your internet by Wi-Fi, you can reconnect the new SSID and try to surf

the internet directly.

4.2 Use the Network setting

Make sure that the network settings of the computer are correct. Wired and

wireless connected computers must use network (IP) addresses on the same

network as the router. The simplest way to do this is to congure each computer

to obtain an IP address automatically using DHCP.

To use the Network setting:

1. Launch a web browser from a

computer or mobile device that

network.

2. Enter 192.168.8.1 in the Web

browser A login window opens.

3. Enter password. The password is 12345678. The BASIC Home page displays.

4. Select Networking Setting. The network setting page displays. As below.

Your ISP uses DHCP to assign you IP address. Your

ISP automatically assigns these addresses.

DHCP Clien

The ISP provide a login and password for your

DSL account, Generally This login name is often

an email address.

PPPoE

WAN Access Type

Description

Field

Page - 12 Page - 13

Enter the IP address, IP subnet mask, and the

gateway IP address that your ISP assigned. The

gateway is the ISP router to which your router

connects.

Static IP

The router’s device name is its model number.

You can assign a name for the Default Mesh.

Host Name

The Default range is 1500 bytes, but it can go

from 1280 to 1550.

MTU Size

5.Access Wi-Fi Settings

5.1 Wi-Fi settings

Make sure that the Wi-Fi setting in the Wi-Fi-enabled computer or mobile device

and the router match. The Wi-Fi network name (SSID) and Wi-Fi security setting

must match exactly. If you setup an access list, you must add each Wi-Fi-enabled

computer or mobile device’s MAC address to the router’s access list.

Click Wi-Fi setting, An interface pop-up as bellows.

There are two buttons to choose from:

1. When choosing OFF, there are two bands,

2.4G and 5G (default setting)

2. When choosing ON, there is only one SSID for

5G. (In fact, it can auto switch internally

according to signal intensity)

Wi-Fi Band

Combination

Rename it or keep the default name

Wi-Fi Name

Choose 8 or more characters including numbers,

letters, and symbols

Wi-Fi Password

DescriptionField

2.4GHz: means 2.4GHz(B/G/N) - You can keep it as

default

Band

There are many types of mode, keep AP+MESH as

the default mode

Mode

Select the channel width from the drop-down

list. The default setting is 40MHz

Channel Width

Advanced Conguration 2.4GHz band

DescriptionField

Page - 14 Page - 15

You can choose upper or lower

Control Sideband

Enables the SSID as a public network

Broadcast SSID

Select the channel you want to use from the

drop-down list. This eld determines which

operating frequency will be used. It is not

necessary to change the wireless channel unless

you notice interference problems with another

nearby access point

Channel Number

You can choose upper or lower

Control Sideband

Select the channel you want to use from the

drop-down list. This eld determines which

operating frequency will be used. It is not

necessary to change the wireless channel unless

you notice interference problems with another

nearby access point

Channel Number

The SSID may appear as a public network

Broadcast SSID

5.2 Guest Wi-Fi Network

At the Wi-Fi Setting page, select Guest Network Setting. Then select to enable

Guest Network.

To change the network name, type a new name in the Guest Wireless Network

Name (SSID) eld.

Add a password if needed.

Click the Save & Apply button to apply and save all changes.

5GHz: means 5GHz(A/N/AC) - You can keep it as

default

Band

There are many types of mode, keep AP+MESH

as the default mode

Mode

Select the channel width from the drop-down

list. The default setting is 80MHz

Channel Width

Advanced Conguration 5GHz band

DescriptionField

Page - 16 Page - 17

6.Access Firewall Setting

6.1 Access DMZ Setting

The default DMZ server feature is helpful when you are using some online games

and videoconferencing applications that are incompatible with Network Address

Translation (NAT). The router is programmed to recognize some of these

applications and to work correctly with them, but other applications might not

function well. In some cases, one local computer can run the application correctly

if the IP address for that computer is entered as the default DMZ server.

Access the Home page > Select Firewall > Select DMZ.

Enable the Default DMZ Server, then type the IP address.

Click Save & Apply to apply and save all settings.

6.2 Setup MAC Filtering

You can use Mac Filtering to block access to your network

To setup MAC Filtering：

Access the Home page > Select Firewall > Select MAC Filtering.

Then the Block Sites page will be displayed

Forbid typed MAC addresses to access Internet

Allow typed MAC addresses to access Internet

Enable MAC Filter

(Blacklist）

Enable MAC Filter

(Whitelist）

Description

Field

6.3 Setup URL Filtering

You can use keywords or web addresses to block certain Internet sites from your

network:

Access the Home page > Select Firewall > Select URL Filtering.

As the Block Sites page displays, choose to enable URL Filtering and Forbid

URL Address check Box.

In the URL Address eld, enter a keyword or domain that you want to block.

For example:

Specify XXX page to block (e.g. http://www.badstu.com/xxx.html).

Specify .com if you want to allow only sites with domain suxes such as edu

or .gov.

Enter a period (.) to block all Internet browsing access.

Click Save & Apply button to enable the blocking.

Page - 18 Page - 19

6.4 Setup Parental Controls

Parental Control enables you to limit online time, block inappropriate contents

for each family member, and pause WiFi on kids’ devices like during dinner or

bedtime.

To set up Parental Controls:

Access The Basic home page > Select Firewall > Select Parental Controls.

A list of connected devices are shown.

Click to enable the parental control and limit the device from accessing the

network.

6.5 Setup QoS

Quality of Service (QoS) allows you to prioritize the online activities that are most

important to users on your network, You can set a high-priority time during

which the bandwidth for a device is guaranteed. For example, if you are using

your laptop for an important video conference and want to avoid a dropped call,

you can set your laptop as high-priority during the time of your video conference.

Access the Home page > Select Firewall > Select QoS, then the Port

Forwarding page displays.

Click to enable QoS, then type the IP address in the Local IP address elds.

Name the QoS rule

Name

Local IP Address

DescriptionField

Choose the devices to which this rule will apply

Local Port Range

For the local port range and Remote port range,

use the same port range for Internal port check

box selected or enter the ports in the Internal

port range eld. FTP(21),TELNET（23),SMTP(25),

DNS（53),HTTP（80),POP3（110),PPTP(1723)or

Remote Desktop（3389)

Type 1 - 65535 if not sure

Table of contents

Other Sunhans Wireless Router manuals

Sunhans

Sunhans SHFi5GIDUX55W Owner's manual

Popular Wireless Router manuals by other brands

Milesight

Milesight UG67 user guide

Airlogic

Airlogic AirSync Class 1 Features

Samsung

Samsung WCH730B user manual

TELEFONICA

TELEFONICA USB Adapter quick start guide

NETGEAR

NETGEAR PowerLINE WiFi 1000 Series quick start

Askey

Askey RAC2V1K user manual

Alloy

Alloy WLF2454AP-S user guide

TP-Link

TP-Link TL-WR542G user guide

NETGEAR

NETGEAR WNR2000v4 user manual

Hama

Hama 53120 Operating instruction

Intellinet

Intellinet 524582 user manual

Asus

Asus RT-N10P user guide

D-Link

D-Link DIR-506L Quick installation guide

Sapido

Sapido GR297n user manual

Asus

Asus DSL-N55U user guide

AMTC

AMTC WR7502 user guide

Compaq

Compaq CP-2W - iPAQ Connection Point manual

SMC Networks

SMC Networks WBR14-N2 FICHE user guide