Sungrow SH5K-20 Guide

Sungrow Australia Group Pty. Ltd. | 1800 SUNGROW (786 476)

servi[email protected]u | www.sungrowpower.com.au

GD_201904_SH5K-20_Quick Commissioning Guide_V1.0 Page 1 of 10

As we continuously improving our products, changes to this document may occur without notice.

Commissioning of SH5K-20 Hybrid Inverters

Disclaimer

The material in this document has been prepared by Sungrow Australia Group Pty. Ltd. ABN 76

168 258 679 and is intended as a guideline to assist solar installers for troubleshooting. It is not a

statement or advice on any of the Electrical or Solar Industry standards or guidelines. Please

observe all OH&S regulations when working on Sungrow equipment.

The commissioning phase of the SH5K-20 inverter is straight forward and simple. All

settings are done from the front panel, and there is no longer any need to manually

enter the battery details –the system will automatically detect a powered-up battery.

On first initialisation, the flowing will appear on the LCD screen.

Enter to set/check the country code

Enter “AU” for AS/NZS 4777 as default

Select appropriate DNSP, or manually enter

grid protection parameters (Default DNSP power factor settings will be loaded)

Sungrow Australia Group Pty. Ltd. | 1800 SUNGROW (786 476)

servi[email protected]u | www.sungrowpower.com.au

GD_201904_SH5K-20_Quick Commissioning Guide_V1.0 Page 2 of 10

As we continuously improving our products, changes to this document may occur without notice.

Enter to save

Check / set time and date as required

Incorrect time setting will affect monitoring

Setting the Zero Export

Sungrow Australia Group Pty. Ltd. | 1800 SUNGROW (786 476)

servi[email protected]u | www.sungrowpower.com.au

GD_201904_SH5K-20_Quick Commissioning Guide_V1.0 Page 3 of 10

As we continuously improving our products, changes to this document may occur without notice.

‘ON’ = No power exported. “OFF” = All power

exported. “PARTIAL” = set by watts

Default = Partial 5000 watts

Set Reactive power if required. Note: Grid

settings already have State requirements loaded when DNSP selected.

Set if required

Set battery discharge times (only available if

battery connected)

Sungrow Australia Group Pty. Ltd. | 1800 SUNGROW (786 476)

servi[email protected]u | www.sungrowpower.com.au

GD_201904_SH5K-20_Quick Commissioning Guide_V1.0 Page 4 of 10

As we continuously improving our products, changes to this document may occur without notice.

Weekday and weekend time zones available

Generally, only set if customer is on TOU

metering. Otherwise leave as default.

EPS (Off-Grid) setting only if EPS box

connected and maximum 3 kW output under EPS mode.

Enable and enter

Sungrow Australia Group Pty. Ltd. | 1800 SUNGROW (786 476)

servi[email protected]u | www.sungrowpower.com.au

GD_201904_SH5K-20_Quick Commissioning Guide_V1.0 Page 5 of 10

As we continuously improving our products, changes to this document may occur without notice.

Enter to save

Enter to test Earth Fault alarm

Enter to save and exit

Sungrow Australia Group Pty. Ltd. | 1800 SUNGROW (786 476)

servi[email protected]u | www.sungrowpower.com.au

GD_201904_SH5K-20_Quick Commissioning Guide_V1.0 Page 6 of 10

As we continuously improving our products, changes to this document may occur without notice.

There are a couple of subsequent settings that may be required depending on the

configuration.

If there is an existing PV system on the same phase, it must be enabled in the settings

otherwise some errors (error 084) may occur. This also allows battery charging from

existing system.

Enter

Password = 111 (Enter)

Sungrow Australia Group Pty. Ltd. | 1800 SUNGROW (786 476)

servi[email protected]u | www.sungrowpower.com.au

GD_201904_SH5K-20_Quick Commissioning Guide_V1.0 Page 7 of 10

As we continuously improving our products, changes to this document may occur without notice.

Enter ‘Existing System’

Enable and enter

Enter the AC power of the total inverters on

the same phase only (you can also change the export limit here)

Enter to save

Sungrow Australia Group Pty. Ltd. | 1800 SUNGROW (786 476)

servi[email protected]u | www.sungrowpower.com.au

GD_201904_SH5K-20_Quick Commissioning Guide_V1.0 Page 8 of 10

As we continuously improving our products, changes to this document may occur without notice.

There may also be a requirement from the customer to reserve a set amount of battery

capacityto be available in the eventof a blackout. This willquarantine a pre-set amount

and will take that amount out of the daily cycle capacity. This is only available after

inverter has restarted with battery set.

Enter into settings

Password = 111

Sungrow Australia Group Pty. Ltd. | 1800 SUNGROW (786 476)

servi[email protected]u | www.sungrowpower.com.au

GD_201904_SH5K-20_Quick Commissioning Guide_V1.0 Page 9 of 10

As we continuously improving our products, changes to this document may occur without notice.

EPS setting

Enable

Enter to confirm

Enter desired value, based on a calculation

of total capacity, load, and how long backup is required for.

Enter to save and finish.

Sungrow Australia Group Pty. Ltd. | 1800 SUNGROW (786 476)

servi[email protected]u | www.sungrowpower.com.au

GD_201904_SH5K-20_Quick Commissioning Guide_V1.0 Page 10 of 10

As we continuously improving our products, changes to this document may occur without notice.

Once the commissioning is completed, please follow the below checklists to test the

system.

1. The inverter only shows green light ON and status shows Running; if the

existing solar power is sufficient, the system should charge the battery.

2. Turn more house load ON to see whether the battery discharges.

3. If the EPS box (or backup) is installed, turn off the grid supply main to test

the Off-grid function; if the function is OK and then turn the grid supply main

to ON.

4. After completing these testing, the system should run OK.

For any assistance, please contact Sungrow Service Department on 1800 786 476.

Other manuals for SH5K-20

Other Sungrow Inverter manuals

Sungrow

Sungrow SG250HX-IN User manual

Sungrow

Sungrow SG2K-S User manual

Sungrow

Sungrow SG500MX User manual

Sungrow

Sungrow SG2KTL-S User manual

Sungrow

Sungrow SG100K3 User manual

Sungrow

Sungrow SG250HX User manual

Sungrow

Sungrow SG15KTL-M User manual

Sungrow

Sungrow SG10KTL-M User manual

Sungrow

Sungrow SH5K User manual

Sungrow

Sungrow SG3KTL-EC User manual

Sungrow

Sungrow SH5K Owner's manual

Sungrow

Sungrow SG30KU User manual

Sungrow

Sungrow SG36KTL-M User manual

Sungrow

Sungrow SG2K-S User manual

Sungrow

Sungrow SH5K-20 User manual

Sungrow

Sungrow SG15KTL-M User manual

Sungrow

Sungrow SG110CX User manual

Sungrow

Sungrow SH6.0RT Installation guide

Sungrow

Sungrow SG30CX User manual

Sungrow

Sungrow T65 User manual

Sungrow

Sungrow SG3.0RT User manual

Sungrow

Sungrow SG2K5-S User manual

Sungrow

Sungrow SunBox PVS-8M User manual

Sungrow

Sungrow SH RS Series Installation guide

Popular Inverter manuals by other brands

Fourgroup

Fourgroup Easy use and Programming Handbook

Velleman

Velleman PI300M user manual

WilTec

WilTec 61897 Operation manual

SMA

SMA SUNNY BOY STORAGE 2.5 Quick reference guide

Simplicity

Simplicity LANDLORD 316 product manual

Santak

Santak SMAX 3000 user manual

ATON

ATON RA.Store-3 user manual

ZIEHL-ABEGG

ZIEHL-ABEGG FXET4AMQ operating instructions

Tektronix

Tektronix CFG250 Operator's manual

Champion

Champion 200989 Operator's manual

Vanner

Vanner 20-500 Series owner's manual

GE GEP user manual

Astrel Group

Astrel Group Power Reducer Installation and instruction manual

MULTIQUIP

MULTIQUIP GDP-5H Operation and parts manual

GoWISE

GoWISE PS1007 user manual

Promate

Promate PM13500D ES Operator's manual

Mastervolt

Mastervolt WHISPER 3.5M3000 RPM user manual

Mitsubishi Electric

Mitsubishi Electric FR-A7AZ instruction manual